Gunting guillotine CNC hidrolik

KK Kletzer CNC Tafelschere KK kletzer AS 3006

Kondisi: baru, Tahun pembuatan: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X, Y axes with hardened and ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearings: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Electrospindle inverter: yes Max electrospindle speed: 24,000 rpm (optionally 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved steel frame, precision machined Table type: vacuum, hybrid, steel, aluminum with M16 or M18 threaded holes #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint Hodpfxsn Nv H Ss Adcsw #MDF #HPL #plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) Hedsl Rix Eopfx Adcsw • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, de-2024-06-14-laserschnitt Hjdpfx Aemzbkrsdcow

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jumlah pemilik sebelumnya: 1, Lini produksi palet Vector dengan robot depaletisasi blok Kuka. Lini ini dioperasikan oleh 3 pekerja dan menghasilkan sekitar 2500 palet EPAL per shift. Kondisi lini sangat baik dan termasuk sistem penyerpihan staples otomatis. Hjdpfxjvxlxdo Adcsw

Kondisi: baru, en Hjdpfx Adod Aca Aecsw

Kondisi: bekas, Tahun pembuatan: 2014, Dijual: Jenis mesin + jumlah: - 1 unit: Sistem transportasi linier untuk 14 stasiun, tipe: LT-14-270 (asli dari sp280) - 1 unit: Stasiun pemuatan otomatis - 1 unit: Stasiun pengumpanan baru - 1 unit: Pengaduk spiral ganda + kotak daya, Tipe: W240A, No: 7402-978 - 1 unit: Stasiun pengembalian adonan - 1 unit: Pengangkat-pemiring, tipe: HK1200 - 2 unit: 2 wadah, Tipe: W240A - Rangka dan platform untuk lini ini - 1 unit: 1x hopper penimbang - 1 unit: 1 pengarah - Kotak daya - Komponen-komponen kecil yang Anda butuhkan untuk lini ini Inspeksi lini dapat dilakukan di lokasi. Jika Anda memiliki pertanyaan atau komentar, jangan ragu untuk menghubungi kami. Penjual akan memuat semua barang dengan hati-hati ke dalam kontainer/truk. Pembeli harus mengatur transportasi. Hodpjnnz Hwsfx Adcjw Hormat kami, Leo Holland

Kondisi: baru, Tahun pembuatan: 2022, Dimensions (LxWxH): 3660 x 1340 x 2500 mm Number of axes: 3 Pressure: 120 tons Approximate weight: 7,000 kg Oil capacity: 200 liters Motor power: 11 kW Press brake control unit: Esa S 630 CNC 10 2D graphic display – touchscreen Control panel: Pivoting pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety PLC Press brake laser safety system: Dsp-Ap safety block (manual laser height adjustment) Press brake backgauge: X-axis, 500 mm travel, including 2 fingers, manually adjustable in height and laterally. Press brake backgauge stop fingers: Standard Xf rear and side guards: Available (CE-compliant model) Press brake upper tool clamping: Manual European type, length: 150 mm (Promecam) Press brake upper tool: Eurostamp 1260 / Standard (835 mm and 805 mm, subdivided into 595 mm and 210 mm) Press brake lower die holder: Mechanical European type, standard width (Promecam) Press brake crowning: CNC adjustable motorized crowning (Y-axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm, subdivided into 100 mm left, 395 mm, 210 mm, and 100 mm right) Press brake stroke Front support arms for press brake: Xf front support Front support for press brake: 2 supports, manually adjustable in height and lateral position. Hsdpfjhut Aajx Adcow Electrical system: 380 V-660 V, 50-60 Hz, 3 Ph (IE3) Control cabinet cooling system: Fan ventilation Number of foot pedals: One Label group: Label group English Packaging method: Plastic cover with stretch film.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 7.998 h, nomor mesin/kendaraan: 43610191, tebal plat aluminium (maks.): 6 mm, For sale is an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Key features of the machine (overall): • Capability to combine punching and laser cutting • Automatic pick-up of parts (vacuum cups for 45kg, a low number of perforations recommended) and pallet change during machine operation • Automatic sheet feeding, maximum length 3050x1500 mm, and scrap collection after cutting, with the ability to load new sheets during operation • Automatic swing arms 1500x400 mm (two detail conveyors) • Turret with 41 fixed and 4 rotating stations • 3 manually adjustable clamps • Cutting elements for parts up to 3020x1500 mm • Laser cutting up to 2000x1500 mm • Max. sheet thickness 6mm (due to brush table) • Tapping function • Pneumatic hold-down system Accessories included: • Safety light barrier • Tapping set • Sensor for scrap chute • Chip extraction system • Separate lubrication for punching and tapping tools • Bending sensors for sheets • Conveyor for removal of punching waste Machine data as of 17.09.2024: • Machine operating time: 7,998 hours • Processing time: 2,972 hours • Cutting time: 1,196 hours • Resonator run time: 6,154 hours AMADA EML3610NT • Max. punching force: 300 kN • Laser output: 4kW (CO2) • Type: EML-NT • Serial no.: 43610191 • Model: EML3610NT • Year of manufacture: November 2014 Hjdsum R T Sepfx Adcow • Total connected load: 400V/68.3 kVA • Power consumption: 85 kVA • Compressed air connection: 8 bar; 48 m³/h • Protected zone width: 30 m (max) • Minimum safety distance: 1.36 m • Machine reaction time + fire wall total reaction time: 320 ms • Stop time: 300 ms • Machine braking distance: 180 mm • Machine weight (punch/laser): 24,000 kg PRIII (finished part reception) • Model: PR III 300 L 2P • Serial no.: 2424 • Year of manufacture: 2013 • Power connection: 400/50V/Hz • Max. power: 8.5 kW • Compressed air connection: 6 bar, 1,000 l/min • Dimensions and weight for collected parts: Thickness 0.5 to 3 mm, minimum 150x150 mm, max. 2500x1000 mm, weight not exceeding 45 kg • Machine weight (PRIII): 4,600 kg ASIII MP (sheet loader) • Model: ASIII MP 300 • Serial no.: 2994 • Year of manufacture: 2015 • Power connection: 400/50V/Hz • Max. power: 12 kW • Compressed air connection: 6 bar, 1,000 l/min • Storable sheet size: max. 3000x1500 mm, min. 1000x300 mm, thickness 0.5 to 8 mm, weight per sheet max. 300 kg • Machine weight (ASIII MP): 12,000 kg The quoted price refers to the complete system. The price does not include: tooling, dismantling, transport, and commissioning. For further questions, please do not hesitate to contact us. The machine is listed on multiple platforms. If interested, please confirm availability.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, de-001 Hodpfxjvzub Ho Adcsw

Kondisi: hampir baru (bekas), Spiralkneter Behältervolumen (Kapazität): 20 Liter Hsdpfxjuu D Dgs Adcsw Spiralkneter sind für den professionellen Einsatz im Bäckerei- und Gastronomiebereich konzipiert. Sie werden zur Herstellung von Grundteigen verwendet, können jedoch auch für die Zubereitung anderer Teigarten eingesetzt werden und ersetzen hierbei die manuelle Bearbeitung durch ein mechanisches System. So ist es möglich, größere Mengen Teig kontinuierlich herzustellen. Die Maschinen bestehen aus einer Zutatenschüssel und einem Mischwerkzeug (Spirale). Spezifikation Spiralkneter elektrisch: Mehlkapazität: 8 kg Kesselvolumen: 20 Liter Mixgeschwindigkeit: 150/200 U/min Kesselgeschwindigkeit: 12/20 U/min Spannung: 220V/380V 50Hz Leistungsaufnahme: 1,5 kW Maschinenabmessungen: 730x390x900 mm