Penekan lokakarya

KK Kletzer Werkstattpresse 80 to

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Cpedpfx Ajfxyhfoa Tow Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 2000, Grinding length: 800 mm Center height: 150 mm Control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Codpju Hag Njfx Aa Tjpw Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swiveling: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight approx.: 4.0 t Space requirement approx. (LWH): 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including diamond dresser -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle attachments

Tahun pembuatan: 2022, Kondisi: baru, La máquina ZIM T1200 puede fabricar tubos de 300 mm a 1200 mm de diámetro y de 500 mm a 2500 mm de altura mediante prensa simple, doble o triple. También es posible producir tubos de 150 mm y 200 mm por demanda especial. Cedpsibbikefx Aa Tepw Las máquinas pueden ser diseñadas en versión semiautomática o totalmente automática según los requisitos del cliente. Utilizamos microprocesadores PLC de la marca SIEMENS en las máquinas automáticas. Las máquinas cuentan con tolva de mortero y sistemas de llenado de mortero integrados. Los materiales producidos pueden ser transportados a la zona de secado mediante carros de transporte o carretillas elevadoras (montacargas). La producción se realiza sobre palets de fabricación. Los materiales de hasta 800 mm de diámetro se transportan a la zona de secado mediante carros de transporte; los tubos de más de 800 mm de diámetro pueden trasladarse con carretilla elevadora. Para mayor rapidez en la producción, también es posible trasladar con carretilla elevadora los tubos de más de 300 mm de diámetro. La máquina realiza la producción mediante prensa hidráulica y vibración. El sistema de vibración de la máquina es un diseño especial de los ingenieros de ZIM. Este sistema de vibración cuenta con un sistema de refrigeración por aceite y una unidad de aceite especial. El control del sistema es electrónico. El chasis especialmente diseñado y robusto de la máquina garantiza una producción duradera y sin fallos.

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard configuration with Flow Control, Thermal Control, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features add approximately €400 in value at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical; in our opinion, the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, Long – Each machine is supplied with a 5-meter-long connection hose package between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach work areas! The connection hose is neatly stored on a hook at the side of the unit. (Hooks manufactured by us) ➤ Fronius Large Trolley – Arguably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With Up/Down current regulation on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator Cpjdpfx Aajwbil Sj Tew ➤ New basket spool adapter for large wire spools This set can weld nearly all materials, including aluminum, steel, and stainless steel (V2A). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in the sheet metal trade. Other options available at extra cost, e.g. Fronius Aw4000/Aw5000 Job Master Torch Package (torch with display) + €550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? To clarify, we purchase almost-new pre-owned machines, disassemble, check everything thoroughly, replace any wear parts as necessary, and only after successful test welding release the machine for sale. "All" machines are clean and have no burn marks on the displays, nor are they riddled with burn holes or dents! You are purchasing an item from us that is also ⭐visually appealing and not completely worn down! ►►►Do we get an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment methods are available? Advance payment or cash on collection in person. ►►►Why buy from us? We are professionals specializing in this Fronius welding machine series and always keep 60–80 machines in stock – exclusively Fronius, no other brands! We know these machines inside and out and do not sell anything we are not familiar with.

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 TECHNISCHE DATEN: Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Cedpfx Aeg Rn Iasa Tepw Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten.

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit Csdpfx Aed Swtaea Tepw - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Kondisi: baru, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Movable cylinder Cpsdoilvb Nopfx Aa Tow - Electric or manual operation - Pressure gauge - Emergency stop - 400V

Kondisi: baru, Tahun pembuatan: 2021, Model: i7 Working area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser output power: 3000W / 2000W / 1500W X / Y-axis positioning accuracy: ±0.05mm X / Y-axis repositioning accuracy: ±0.03mm X / Y-axis max. linkage speed: 100m/min 1. Compact design with full protection The small footprint balances comprehensive protection with enhanced safety. 2. Active anti-collision function Effectively reduces laser head damage rates, helping you save on maintenance costs. 3. Cast iron bed Featuring excellent shock absorption, the cast iron bed maintains its shape over time and ensures optimal mechanical properties. Cpjdpfsg D Nypjx Aa Tow 4. Burr-free cutting of thin sheets The i series can cut the edges of thin sheets and reliably ensures burr-free results without vibration marks.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, plc-schleiffunktionen-ungarn Cpodpfx Aoxywgfsa Tow

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, schliesskraft-und-parameter-1 Codpevl Skgefx Aa Topw