Mesin penggulung lembaran 4-roll hidrolik

KK-Industries CY4R-HHS 300-20/20

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Ffodped Auacjfx Adgst Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Kondisi: baru, Tahun pembuatan: 2024, panjang rol: 3.000 mm, ketebalan lembaran (maks.): 90 mm, ketebalan pelat baja (maks.): 90 mm, tebal plat aluminium (maks.): 90 mm,

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seco drum usado fabricado por SAFEM, extraído de una línea de productos sin gluten. Fedoq Nmuwjpfx Adgoft Fluido: Vapor Presión de diseño: 12 bar Presión máxima de trabajo: 9,5 bar Presión de prueba: 24 bar Temperatura máxima de operación: 192ºC Volumen: 4,55 m³ Presión x Volumen: 54,6 bar x m³

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, diameter rol atas: 200 mm, diameter roll samping: 150 mm, ketebalan lembaran (maks.): 6 mm, panjang kerja: 3.000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roller diameter 200 mm Side roller diameter 150 mm Hydraulic drop-end Ffedjuzm Ayjpfx Adgst

Tahun pembuatan: 2002, Kondisi: bekas, EN20240616_001_TIMESAVERS_GRINDER Ffjdjt Hw Shjpfx Adgjt

Kondisi: baru, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approximate Weight: 2,400 kg Total Power Requirement: 4 kW Bending Stroke: 5 mm Sheet Thickness: 6 mm Sheet Length: 2,030 mm Fsdpfx Adod Ab Haogoft Technical Data Roller Diameter: 170 mm Equipment • 3 rollers • Asymmetrical roller arrangement with pre-bending • Top roller can be swung out forwards • Motorized right/left control • Conical bending by tilting the rear roller • Operation via foot pedal • Hardened rollers • Digital display For the catalog, please see the following link:

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 804, panjang rol: 2.550 mm, lebar kerja: 2.500 mm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, berat keseluruhan: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Ffsdpfx Adsvxbm Regjt Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair platform can be purchased to go with the machine.

Kondisi: baru, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 9.7 t Dimensions (L x W x H): 4.88 x 1.16 x 1.18 m Illustration similar Bending capacity: 10.0 mm » at 3x top roll diameter Pre-bending: 8.0 mm » at 1.5x top roll diameter Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft • Pressure-adjustable bottom roll • Electric and hydraulic overload protection • Movable control console • Operating manual in GERMAN and ENGLISH Ffsdpfx Adjd Ab H Esgst • Machine and equipment compliant with CE regulations Important notes for conical rolling: • Maximum sheet thickness is 50% of the nominal capacity • Cone length must not exceed 30% or must be more than 60% of the roll length • Hardened rolls recommended

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface for 2nd machine Ffedpfx Aewykccsdgjt

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter 6 - 28 mm Wall thickness 2 mm Bending radius min. 2 x D Control system IPU 20 Bending radius max. 5.0 x D mm Max. bending angle 190° Mandrel length 3000 mm Operating pressure 180 bar Hydraulic motor 4 kW Machine weight approx. 900 kg Space requirement approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 preset bending angles and display in the control panel for angle specification, angle detection and angle measurement via absolute value rotary encoder, automatic tool table reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, feed forward/back, mandrel forward/back, bend forward/back, lock forward/back, mandrel lubrication, rotation device forward/back, table reset, length stop forward, emergency stop. The machine comes from prototype production and was only lightly used until 2000. Afterwards, the machines from this department were sold. However, the purchaser did not use the tube bending machine, so it has only been stored since then and has not been in operation (original paintwork). Machine offered at a special low price! This is a used machine; therefore, sale is made excluding any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM. Fjdpfx Asvtgn Nsdgjft