Mesin penggulung lembaran 4-roll hidrolik

KK-Industries CY4R-HHS 510-25/50

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Used straightening press in very good condition for sale. Duodoufhzvspfx Adgel This universal and robust Stierli straightening press is equipped with a 5m straightening beam, allowing processing of beams up to HEA-600 and HEB-600 (at S-235). The machine operates using the reliable Stierli stroke fine adjustment control system, which makes it very user-friendly and enables fast, precise straightening and bending. Additional options can be added upon request, such as a powered roller conveyor, NC control, laser measurement, and more. (Note: The photo does not show the actual machine.)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. Duodsph Uk Nspfx Adgjl (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: baru, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Djdpfxoiffwqe Adgoul Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end bearing Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2,150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on a yield strength of 250 N/mm² Material: (ST 37 - ST 42 construction steel)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, TRANSLATION YEAR: 2008 MAXIMUM RAM PRESSURE: 2,000 tons RAM STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm UPPER BLANKHOLDER PRESSURE: 300 tons BLANKHOLDER STROKE (ram): 200 mm Duodpevm Eixsfx Adgol RAPID TRAVERSE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE: 400 mm OVERALL HEIGHT FROM FLOOR: 9,145 mm FRONT OPENING (between uprights): 5,000 mm TOTAL WEIGHT: n/a

Kondisi: baik (bekas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for fabrication of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with a Siemens SIMATIC panel and Rittal electric cabinet. Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Large die tooling set, radii: 10/20/30/50/60/80/100 mm Dedpfxokvmi Ss Adgoul Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine placed 2,350 mm below ground level Specifications Metric US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: baru, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 9.7 t Dimensions (L x W x H): 4.88 x 1.16 x 1.18 m Illustration similar Dujdpfx Aed Ab H Eedgjl Bending capacity: 10.0 mm » at 3x top roll diameter Pre-bending: 8.0 mm » at 1.5x top roll diameter Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft • Pressure-adjustable bottom roll • Electric and hydraulic overload protection • Movable control console • Operating manual in GERMAN and ENGLISH • Machine and equipment compliant with CE regulations Important notes for conical rolling: • Maximum sheet thickness is 50% of the nominal capacity • Cone length must not exceed 30% or must be more than 60% of the roll length • Hardened rolls recommended

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HV-300NC, tinggi total: 1.840 mm, tinggi meja: 950 mm, lebar total: 3.200 mm, panjang total: 2.500 mm, gaya penekanan: 300 t, panjang meja: 750 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 15 mm/dtk, panjang langkah: 450 mm, kecepatan penekanan: 2 mm/dtk, Perlengkapan: dokumentasi / manual, TECHNICAL DATA: Pressure 300 t Motor output 7.5 kW Throat 405 mm Working speed 2 mm/s Approach speed 9.9 mm/s Return speed 14.7 mm/s Maximum pressure 320 bar Piston stroke 450 mm Support table 2,500 x 750 mm Guide diameter 60 mm Main table 750 x 750 mm Maximum daylight between tables 900 mm Working height 950 mm Support blocks 150 x 150 x 750 mm Overall length 3,200 mm Overall width 2,500 mm Overall height 1,800 mm Weight 13,300 kg DESCRIPTION: Our horizontal hydraulic ram presses of the HV/NC series are available with three different pressing forces from 150 to 300 tons. Horizontal hydraulic presses are specifically designed for the straightening and bending of profiles, bars, and beams. Thanks to the horizontal design of the machine, large beams and profiles can be worked with ease. The latest generation horizontal hydraulic press of the HV/NC series has evolved into a versatile machine capable of accommodating a wide range of tool options. STRUCTURE AND TABLES The horizontal hydraulic straightening presses of the HV/NC series consist of a C-frame electro-welded structure manufactured exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. The design is calculated using finite element software. All of these features ensure that we consistently meet our high standards for robustness, precision, and quality. They are equipped with a main sliding table and a rear support table made of high-strength steel with T-slots to DIN 650. Support blocks made from C45E steel are supplied as standard. The main table ensures perfect parallelism via four cylindrical guides with maintenance-free bimetallic bushings for frictionless operation. Dsdpfx Adswk Hkqegoul Adjustable support rollers on each side are included as standard equipment. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with seamless cold-drawn tube, chromed piston, and maintenance-free wear-resistant guides. Motorized hydraulic unit with two speeds and automatic fast-speed shut-off. Includes a cylinder decompression valve. ELECTRICAL INSTALLATION AND SAFETY The machine features a SIEMENS safety PLC, SIMATIC S7 1200 type and a 4-inch MTP-400-type touchscreen located above the electric foot pedal. It allows programming of semi-automatic and automatic operation modes, power, stroke, and dwell time of the upper cylinder. There is a memory capacity for 99 recipes, with all parameters programmable for each recipe. The electrical control panel features a selector switch for choosing between manual or automatic operation, and a keyed selector for maintenance operations. Electrical and hydraulic controls are redundant and self-monitoring. An additional safety block and self-monitoring devices for controls and safety are integrated.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, nomor mesin/kendaraan: 3ROLL3000X50MM, diameter roller (bawah): 460 mm, diameter rol atas: 500 mm, diameter rol: 500 mm, panjang rol: 3.100 mm, lebar kerja: 3.000 mm, ketebalan pelat baja (maks.): 50 mm, berat keseluruhan: 26.000 kg, jenis arus masuk: tiga fasa, panjang kerja: 3.000 mm, Perlengkapan: dokumentasi / manual, henti darurat, Model 3-rollen-Walzenbieger mit Vorpresseinrichtung 3000 x 50 mm Obere Walze: 500 mm Durchmesser LEISTUNGSDATEN Blechbreite: 3.000 mm Blechdicke: 50 mm Vorbiegeleistung: 36 mm Walzdurchmesser: 2.200 mm Ausgelegt für Blechqualität: 355 MPa --- Bei reduzierter Blechbreite (2.000 mm): Duedpfxsvr S S Rs Adgjl Max. Blechdicke: 55 mm --- Minimaler Walzdurchmesser: 600 mm Alle Zubehörteile installiert: - Gehärtete Walzen - Konische Biegevorrichtung - Digitale Positionsanzeige - Installierte Leistung: 50 PS - Maschinengewicht: 26 t

Kondisi: siap digunakan (bekas), daya: 134,102 kW (182,33 hp), berat kosong: 21.000 kg, panjang total: 5.000 mm, lebar total: 2.120 mm, tinggi total: 2.140 mm, kapasitas angkut: 400.000 kg, kecepatan operasi: 15 mm/dtk, kecepatan mundur: 49 mm/dtk, Alat pelurus untuk balok dan penyesuaian elektrik lainnya untuk langkah (untuk pekerjaan berulang). Penyesuaian manual untuk membuka cetakan tekuk. Rol bertenaga untuk memasukkan benda kerja. Penyesuaian ram maksimum: 620 mm Jarak maksimum antara meja dan ram: 600 mm (1020 mm tanpa alat) Duedpfx Ajv Rwfgedgel

Kondisi: baru, Sheet thickness: 45 Bending length: 3100 Top roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated upper cover for easy material removal - Digital display for lower and side roll positioning - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 7,000 - Material feed table: EUR 3,700 Dsdsd Ab N Uopfx Adgeul - Oil cooler: EUR 800 - Central support: EUR 9,500 - Side supports: EUR 10,200 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!