Derek segala medan

Klaas K 17-24

Kondisi: sangat baik (bekas), warna: hitam, tinggi angkat: 23.500 mm, Tahun pembuatan: 2020, jam operasional: 93 h, Penggerak: Roda Berat kosong: 2.500 kg Kapasitas angkat: 800 kg Dimensi ruang kargo: 782 x 204 x 232 cm Kondisi teknis: sangat baik Kondisi visual: sangat baik Syarat pengiriman: EXW Negara produksi: DE Hfedpfxoxzdv Ao Anlsn Silakan hubungi Vink Machinery untuk informasi lebih lanjut. = Opsi dan aksesori tambahan = - Dongkrak bawah = Catatan = Klaas K17/24 * Tahun produksi 2020 * Penggerak bensin * 93 jam operasional * Tinggi kait 23,5 m * Jangkauan horizontal 18 m * Kapasitas angkut 800 kg * Kontrol jarak jauh * Dilengkapi dengan lampu kerja * Penggerak roda * Sudah dipersiapkan untuk keranjang kerja * Termasuk dokumentasi

Kondisi: bekas, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. Hjdpfxjzhnafj Anljfn - Heavy-duty base frame construction for a level working surface. - Clamping of elements via 9 system clamping beams with pneumatic cylinders. The clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg / 4,200 N at 10 bar operating pressure. The clamping system can be operated in two groups (5 and 4 beams), allowing two elements to be clamped/processed simultaneously. - Working surface sheathed with timber panels as far as technically possible. (Optionally available: perforated metal plate as shown in the photo) - Stop system at the bottom with 9 locating pins and at the side with 7 locating pins for precise element positioning. - Tilting device for the assembly station with 3 hydraulic cylinders for element weights of up to 4,000 kg at 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also protected and installed underneath the assembly station. - Operation of the functions is performed via a pendant control. - At both ends of the station, one compressed air connection and one socket are installed; on the longitudinal side of the station, there are two sockets and two compressed air connections for connecting hand tools. - The stations are modular in design, allowing them to be expanded immediately or at a later date with a receiver station to form a complete tilting station. A tilting station can be seen in picture 3. - Further options: assembly table without tilting function, perforated metal plates, other working dimensions on request. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of clamping cylinders: 320 mm - Locating pin height: 120 mm - Working height: approx. 700 mm - Colour RAL 7035 light grey

Kondisi: bekas, jarak tempuh: 456.492 km, daya: 125 kW (169,95 hp), pendaftaran pertama: 05/2000, jenis bahan bakar: diesel, berat keseluruhan: 7.490 kg, warna: hijau, tipe perpindahan gigi: mekanis, jumlah tempat duduk: 2, Perlengkapan: derek,

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin edging kaca vertikal dengan 10 cup wheel, sudut variabel 0-45°. Total meter kerja: 179.000. Tinggi kaca minimum: 70 mm. Kecepatan: 0,5 - 5 m/menit. Ketebalan kaca: 3 - 50 mm. Dimensi mesin (P x L x T): 8,8 x 1,2 x 3 m. Berat: 4.300 kg. Hsdpfxex Hvxpo Anlsfn

Kondisi: bekas, jarak tempuh: 100 km, daya: 129 kW (175,39 hp), pendaftaran pertama: 10/2015, jenis bahan bakar: diesel, berat keseluruhan: 7.490 kg, warna: putih, kelas emisi: Euro 6,

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tipe perpindahan gigi: hidrostatik, jenis bahan bakar: bensin, kapasitas tangki bahan bakar: 25 l, berat keseluruhan: 3.500 kg, berat kosong: 3.500 kg, konfigurasi gandar: 2 gandar, suspensi: pegas daun parabola (per), Tahun pembuatan: 2008, jam operasional: 3.000 h, kran derek atap tipe AHK30/1600 dilengkapi dengan kait palet, bak penampung, dan kait pan. Hfsdpfxjzu Au Re Anlen

Kondisi: bekas, jarak tempuh: 29.224 km, daya: 132 kW (179,47 hp), pendaftaran pertama: 01/2016, jenis bahan bakar: diesel, berat keseluruhan: 7.490 kg, warna: biru, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Perlengkapan: ABS, derek, filter jelaga, kunci sentral, pendingin udara,

Kondisi: baru, Dimensions (L x W): 1400 x 1750 mm Weight: kg Swivelling: yes/no – yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Universally usable work table, e.g. for frame assembly, roller shutter box assembly, glazing bars, sash fitting, and glazing. Equipment, alternative/optional equipment available upon request! Pos. 1.0: Article No.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one fixed on the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilting mechanism, load capacity 130 kg. Operation via foot pedal. Roller conveyor manually foldable and laterally extendable from 1400–2500 mm; roller length 140 mm (closed). Roller conveyor height in vertical table position adjustable from 300–380 mm, working height (horizontal) adjustable from 920–970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Article No.: 5582 Pneumatic swivel mechanism for roller conveyor for MKS Pos. 1.2: Article No.: 21127 Support bar 1400 mm non-extendable for RU-MKS Pos. 1.3: Article No.: 5585 360° rotary mechanism with pneumatic locking in 180° increments Rotary brake operable from both sides When using the rotary mechanism, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Article No.: 6455-01 6 storage boxes, each with 2 compartments, mounted swivellable; for RU-MKS Pos. 1.5: Article No.: 5597-10 Travel mechanism for semi-circular running rail for RU-MKS-P4 Operated by foot pedal, mounted on the roller conveyor side. Pos. 1.6: Article No.: 6354-6 3 dual meter semi-circular running rails 30 x 10 mm Pos. 1.7: Article No.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support bar, with felt on contact side, installation left or right – please specify. Pos. 1.8: Article No.: 5584 Lifting device 450 mm for working on vertically standing elements. Operated by foot pedal. Maximum load capacity: 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet Hfedpfx Anjx H Al Aolon ----- Total price for this configuration: on request! Video and PDF brochure attached. (Technical specifications according to manufacturer – without guarantee!)

Kondisi: baru, Dimensions L-W-H: 960 x 460 x 860 mm Weight: 75 kg Number of drawers: 8 pcs. Tool trolley with 8 drawers, all equipped with tools. - All drawers are ball bearing mounted and fully extendable. - The entire workshop trolley is lockable. - The trolley features 4 robust wheels, of which 2 are swivel with locking function for added maneuverability and safety. - The included tools are made of chrome vanadium steel. - The trolley top is fitted with a robust polypropylene worktop. - Tools are organized within styrofoam/foam inlays for secure storage. + Drawer 1: - 1/4" drive: 13 sockets from 4mm to 14mm, 11 deep sockets 4mm to 13mm Ratchet, universal joint, extension bar. - 3/8" drive: 10 sockets from 10mm to 19mm, 11 deep sockets from 6mm to 19mm Ratchet, universal joint, extension bar. - 1/2" drive: 17 sockets from 8mm to 32mm, 9 deep sockets from 10mm to 22mm Ratchet, universal joint, extension bar. + Drawer 2: - 1/4" drive accessories: Torx sockets (solid): T8, T9, T10, T15, T20, T25, T27, T30, T40 Torx sockets (with hole): TT8, TT9, TT10, TT15, TT20, TT25, TT27, TT30, TT40 Hex sockets: H3 to H8 Slotted sockets: SL4 to SL7 Pozidriv sockets: PZ0 to PZ3, Phillips: PH0 to PH3 XZN (triple square) sockets: M8, M10, M12 Five-point sockets: TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - 3/8" drive accessories: Bit adapter Torx sockets (solid): T40, T45, T50, T55, T60, T70 Torx sockets (with hole): TT40, TT45, TT50, TT55, TT60, TT70 Hex sockets: H7, H8, H10, H12, H14 Slotted sockets: SL8, SL10, SL12 Pozidriv sockets: PZ3, PZ4, Phillips: PH4, PH8 - 1/2" drive accessories: Hex: H14, H17, H19, H22, H24; H5, H10, H11, H13 Torx: T40, T45, T50, T55, T60, T70, T80 RIBE: R9, R10, XZN: M16; XZN: M9, M10, M12, M14, M16, M18 Short, long, and medium adapters Torx: T30, T45, T50; Hex: H7 + Drawer 3: - Ratcheting combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22mm Hsdpjzb Rbtofx Anlofn - Double ring spanner set, 8 pcs: 6x7mm, 8x9mm, 10x11mm, 12x13mm, 14x15mm, 16x17mm, 18x19mm, 20x22mm - Torque wrench + Drawer 4: - Precision screwdrivers: Slotted: SL3.0 x 100mm, Phillips: PH0 x 100mm - Screwdrivers with soft grip and external hex bolster: Slotted: SL6 x 38mm; SL5 x 75mm; SL6 x 100mm; SL8 x 150mm Phillips: PH2 x 38mm; PH1 x 75mm; PH2 x 100mm; PH3 x 150mm - Torx screwdrivers: T6 x 80; T7 x 80; T8 x 80; T9 x 80; T10 x 80; T15 x 100; T20 x 100; T25 x 100; T27 x 100; T30 x 100; T40 x 150 + Drawer 5: - T-handle hex key set with ball end: 3 x 115mm; 4 x 120mm; 5 x 140mm; 6 x 160mm; 7 x 170mm; 8 x 175mm; 10 x 200mm - T-handle TORX: T10 – T40 + Drawer 6: - Circlip plier set, internal/external, 4 pcs (2 bent, 2 straight) - Plier set: combination pliers, side cutter, straight long-nose pliers, bent long-nose pliers, pipe wrench - Hammer + Drawer 7: - Nut driver sockets: 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8: - Tools for bodywork

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Penghisap serbuk kayu SCHUKO STA 5,5 kW Lebar: 2200 mm Tinggi: 3600 mm Kedalaman: 1100 mm Panjang kantong: 200 cm Diameter selongsong filter: 140 mm Jumlah selongsong filter: 54 buah Kantong penampungan: 3 buah Hfedpjx I N A Dsfx Anlon Diameter kantong penampungan: 500 mm Koneksi/Nozzle: 250 mm Daya motor utama: 5,5 kW Sistem pengocokan kantong filter Pipa penghisap disertakan dalam paket