Stasiun perakitan
RUCHSER RU-MKS-1,4 Montage-Kipptisch

Name: RUCHSER RU-MKS-1,4 Montage-Kipptisch
Brand: RUCHSER
Availability: InStock

Kondisi

Baru

Lokasi

Aalen

Stasiun perakitan RUCHSER RU-MKS-1,4 Montage-Kipptisch

Data dasar

Nama mesin:: Stasiun perakitan

Pabrikan:: RUCHSER

Model:: RU-MKS-1,4 Montage-Kipptisch

Kondisi:: baru

Harga & Lokasi

Lokasi penjual:: Elisabethenstr. 41, 73432 Aalen, Jerman

Hubungi

Rincian penawaran

ID iklan:: A20764982

Nomor referensi:: 1305-2658

Pembaruan:: terakhir pada 15.12.2025

Deskripsi

Dimensions (L x W): 1400 x 1750 mm
Weight: kg
Swivelling: yes/no – yes
RUCHSER Assembly Tilting Table RU-MKS 1.4

-----

Universally usable work table, e.g. for frame assembly, roller shutter box assembly, glazing bars, sash fitting, and glazing.

Equipment, alternative/optional equipment available upon request!

Pos. 1.0: Article No.: 8820000
RU-MKS-1.4 Assembly Tilting Table
Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm
Support surface with 3 support bars, 2 of which are adjustable,
one fixed on the upper extension,
covered with felt. Support surface with width and
height/depth extension. Pneumatic tilting mechanism,
load capacity 130 kg. Operation via foot pedal.
Roller conveyor manually foldable and laterally extendable
from 1400–2500 mm; roller length 140 mm
(closed). Roller conveyor height in vertical
table position adjustable from 300–380 mm,
working height (horizontal) adjustable from 920–970 mm.
!For safety reasons, at least one flat clamping cylinder must be ordered!

Pos. 1.1: Article No.: 5582
Pneumatic swivel mechanism for roller conveyor for MKS

Pos. 1.2: Article No.: 21127
Support bar 1400 mm non-extendable for RU-MKS

Pos. 1.3: Article No.: 5585
360° rotary mechanism with pneumatic locking in 180° increments
Hnodpfox H Al Aox Ab Ssu

Rotary brake operable from both sides
When using the rotary mechanism, the minimum roller conveyor height
of the MKS table increases to 330 mm

Pos. 1.4: Article No.: 6455-01
6 storage boxes, each with 2 compartments,
mounted swivellable; for RU-MKS

Pos. 1.5: Article No.: 5597-10
Travel mechanism for semi-circular running rail for RU-MKS-P4
Operated by foot pedal, mounted on the roller conveyor side.

Pos. 1.6: Article No.: 6354-6
3 dual meter semi-circular running rails 30 x 10 mm

Pos. 1.7: Article No.: 5193-1
Flat clamping cylinder with hand valve, clamping range 130 mm, retractable
mounted on support bar, with felt on contact side,
installation left or right – please specify.

Pos. 1.8: Article No.: 5584
Lifting device 450 mm for working on vertically standing elements.

Operated by foot pedal. Maximum load capacity:
200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2.

Pos. 99.1 Packaging on pallet

-----

Total price for this configuration: on request!

Video and PDF brochure attached.

(Technical specifications according to manufacturer – without guarantee!)

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

20764982-01.pdf

Penyedia

Terdaftar sejak: 2002

135 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7364 ... iklan

+49 7361 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Gergaji panel vertikal Striebig CONTROL 6224

Seeshaupt

11.024 km

Gergaji panel vertikal
StriebigCONTROL 6224

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Cutting capacity: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring saw unit EPS.X – Electronic positioning system for X-stop 12" touchscreen display Saw Frame Hnodpfxsyx H Dte Ab Ssu • Machine manufactured with precision components to 1/100 mm • Heavy-duty, self-supporting, rigid welded saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of middle support • Automatic roller locking during sawing Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with cut position recognition Saw Unit • Play-free, smooth-running guides • Robust mounting of motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased user comfort due to largely automated operation • Laser-assisted indication of horizontal cut • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy manual mode switching • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen computer with optimized user guidance • Multilingual user interface • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic sawing sequence • Infinitely variable feed speed 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • 24VDC UPS for touch PC (uninterruptible power supply) • Automatic saw beam positioning ASP Measurement Setting • Digital measurement system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winning (including Swiss Design Prize) • Function- and operator-oriented ergonomics Installation • Wall or free-standing installation possible

Lihat detail

Iklan kecil

Aalen

11.090 km

Stapler
RUCHSERJumbo Automatic Video

Hubungi

Kondisi: baru, Mesin pemasang paku rel kaca Ruchser "2 P Jumbo automatic E.C." - baru - Keunggulan Anda: - Sambungan sudut tertutup rapat - Tidak ada celah rel kaca yang terbuka - Tidak ada perbedaan warna saat pengecatan - Rangka rel kaca mudah diposisikan Mesin penyambung sudut dengan klip 2P Hnsdovnh T Nepfx Ab Ssu Jumbo Automatic E.C. untuk memasang klip pada rangka rel kaca. Pilihan antara pengoperasian otomatis dan manual; Dilengkapi dengan penyangga sudut, mekanisme penjepit dari atas dan depan Tekanan dapat diatur secara terpisah. Pemasangan klip paralel dan bertumpuk dimungkinkan melalui kontrol pemrograman elektronik. Mesin pemasang klip dapat dipasang pada meja kerja yang sesuai, Pengoperasian melalui pedal kaki. ----- Harga untuk konfigurasi ini tersedia berdasarkan permintaan! Ditambah pajak pertambahan nilai (PPN) dan biaya pengemasan/pengiriman ----- Gambar menunjukkan mesin penyambung sudut dengan klip 2P dengan opsi meja kerja yang dapat digerakkan (lihat detail di bawah "Harga Tambahan") Harga Tambahan: ----- Meja kerja yang dapat digerakkan ketinggian dapat diatur dari 700 - 1000 mm, 2 buah penyangga yang dapat dipasang panjang 1000 mm, 2 buah penyangga yang dapat diputar dan digeser panjang 1000 mm, penyangga dilapisi dengan felt, 4 buah roda kemudi, 2 di antaranya dengan pengunci. ----- Harga Tambahan: 1.311,00 Euro (netto) Klip: Paket Klip 15 mm (paket berisi 2000 buah): Harga 22,00 Euro Klip 12 mm (paket berisi 3000 buah): Harga 32,00 Euro Klip 10 mm (paket berisi 3000 buah): Harga 32,00 Euro Dimensi dan Berat ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Meja kerja 32 kg Semua harga dalam bentuk netto. Ditambah PPN. Harga dari pabrik, ditambah biaya pengemasan dan pengiriman. (Data teknis sesuai dengan produsen - tanpa jaminan!)

Lihat detail

Iklan kecil

Gergaji otomatis aluminium Eisele VA-L-560/600

Emmendingen

11.271 km

Gergaji otomatis aluminium
EiseleVA-L-560/600

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC Hsdpfx Absuiy Hre Sonu - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Lihat detail

Iklan kecil

Elumatec MGS142 Retrofit / APM Lupberger Elumatec MGS142 mit Pusher

Emmendingen

11.271 km

Elumatec MGS142 Retrofit / APM Lupberger
ElumatecMGS142 mit Pusher

Hubungi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Hjdpfx Abjuiy Ngo Sonu Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Lihat detail

Iklan kecil

Meja perakitan KomTec Universal GPM, untuk konstruksi rangka kayu KomTec GPM

Jerman

11.207 km

Meja perakitan KomTec Universal GPM, untuk konstruksi rangka kayu
KomTecGPM

Hubungi

Kondisi: bekas, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty base frame construction for a level working surface. - Clamping of elements via 9 system clamping beams with pneumatic cylinders. The clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg / 4,200 N at 10 bar operating pressure. The clamping system can be operated in two groups (5 and 4 beams), allowing two elements to be clamped/processed simultaneously. - Working surface sheathed with timber panels as far as technically possible. (Optionally available: perforated metal plate as shown in the photo) - Stop system at the bottom with 9 locating pins and at the side with 7 locating pins for precise element positioning. - Tilting device for the assembly station with 3 hydraulic cylinders for element weights of up to 4,000 kg at 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also protected and installed underneath the assembly station. - Operation of the functions is performed via a pendant control. - At both ends of the station, one compressed air connection and one socket are installed; on the longitudinal side of the station, there are two sockets and two compressed air connections for connecting hand tools. Hsdpjzhnafofx Ab Senu - The stations are modular in design, allowing them to be expanded immediately or at a later date with a receiver station to form a complete tilting station. A tilting station can be seen in picture 3. - Further options: assembly table without tilting function, perforated metal plates, other working dimensions on request. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of clamping cylinders: 320 mm - Locating pin height: 120 mm - Working height: approx. 700 mm - Colour RAL 7035 light grey

Lihat detail

Iklan kecil

Pusat pemrosesan jendela sudut Weinig Unicontrol 10

Kežmarok

10.339 km

Pusat pemrosesan jendela sudut
WeinigUnicontrol 10

€17.000

Harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, I am selling a complete window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR - Condition: very good Hnsdpofzzhysfx Ab Sju

Lihat detail

Iklan kecil

Lini produksi jendela WEINIG WEINIG Unirex 3000, Unitex 15, Univar 15

Wioska

10.611 km

Lini produksi jendela WEINIG
WEINIGUnirex 3000, Unitex 15, Univar 15

Hubungi

Iklan kecil

Jettingen-Scheppach

11.076 km

Meja ampelas
AL-KOAST 1.5 BASIC

Hubungi

Tahun pembuatan: 2026, Kondisi: baru, AL-KO sanding table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and carries the "Wood Dust Tested according to BGI 739-1" seal. This makes it suitable for manual sanding work as well as for processing workpieces with handheld machines. The sanding table is made of galvanized steel sheet. The extraction tray is aerodynamically optimized. The funnel-shaped design of the tray with an integrated air duct directs airflow efficiently to the extraction nozzle. Connection to the on-site extraction system can be made, depending on the required extraction capacity, via either a 140 mm or 160 mm diameter connection nozzle. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grilles are air-flow optimized towards the suction port, ensuring optimal extraction performance. For cleaning the inside of the sanding table, the beech wood slatted top can be removed and the air duct can be detached by loosening a few screws. The sanding table is delivered pre-assembled; only the legs need to be mounted and adjusted to the desired working height. Your benefits: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long edges for edge sanding Hsdpfx Asfyadbeb Ssnu • Workpiece-protecting removable beechwood slatted top • Funnel-shaped airflow to the extraction nozzle Technical data: • Extraction nozzle: 140 / 160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the nozzle at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Working height adjustable: 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Lihat detail

Iklan kecil

Oberkochen

11.093 km

Gergaji manik kaca
HECHTES 350

€12.000

Harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Jumlah mesin: 1 unit Panjang kerja: 2500 mm Pengendali: tidak ada Hecht ES 350, Mesin pemotong profil kaca satu sisi ----- Pemutar secara pneumatis terhadap penahan tetap. 45º/90º/135º dengan penggerak mata gergaji secara pneumatis pemutaran pneumatis melalui penahan pemutar manual dengan kaki mesin, penegangan pneumatis Mata gergaji HM 350 x 3,0/2,2/30 Z 100 Hjdpevpr N Rsfx Ab Ssnu Ukuran rangka gergaji: panjang 700 mm, lebar 1.600 mm, tinggi 1.500 mm Penahan pengukur 1,5 m Dudukan 1,5 m dengan penyangga Penahan pengukur 3 m Perpanjangan dudukan dari 1,5 m menjadi 3 m dengan penyangga Sisipan meja beralur untuk profil kaca yang telah diproses HECHT ASB, penahan panjang manual dengan tampilan digital, 2500 mm Dilengkapi dengan perangkat penyedot debu (spesifikasi teknis sesuai dengan produsen – tanpa jaminan!)

Lihat detail

Iklan kecil

Kotak Rana Rol Aluminium Pvc dan Pemotongan Lamella PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİ SÇ 450

Barakfakih

9.621 km

Kotak Rana Rol Aluminium Pvc dan Pemotongan Lamella
PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİSÇ 450

Hubungi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Dirancang untuk pemotongan massal lamela penutup jendela dalam bentuk paket, pemotongan serentak kotak penutup jendela, pemotongan pilar samping, dan pemotongan serentak kotak penutup monoblok. • Pemotongan permukaan bersih berkat kecepatan putar gergaji yang tinggi Hnedpfjramzfsx Ab Sou • Sistem konveyor rol kanan dan kiri, masing-masing 3 meter x 2 unit • Kecepatan pemotongan gergaji dapat disesuaikan • Semua kotak penutup jendela, termasuk kotak hingga maksimum 350 mm, dapat dipotong • Pemotongan presisi berkat sistem rel linear • Diameter mata gergaji Ø550 mm OPSIONAL • Sistem pendinginan • Dapat beroperasi dengan meter digital

Lihat detail

Beriklan di sini