Penukar panas

Klingenburg RRSE 4066/2750

Kondisi: sangat baik (bekas), Hochgeschwindigkeits-Hobelzuführung bestehend aus einem freistehenden Flachmagazin vor einem Hochgeschwindigkeits-Hobel. Das Zuführmagazin wird von Hydraulikmotoren angetrieben, die von einer 5,5-kW-Hydraulikaggregat (max. 140 m/min) gespeist werden. Ein Puffer aus Rohmaterial wird flach nebeneinander auf dem Ketten-Querförderer ausgerichtet. Der Kettenförderer transportiert die Teile quer bis zur Anschlagschiene. Das Teil neben der Anschlagschiene wird mittels Lichtschranke erfasst, wodurch die erste Andruckrolle angehoben wird, um den Einlauf zu ermöglichen; anschließend schiebt die Transportwalze das Werkstück unter die Einzugswalzen des Hobels. Die erste Einzugswalze des Hobels muss eine freilaufende Rolle sein, um den Betrieb der EM814 zu ermöglichen. Godpfx Aewgbxzoazsuf

Tahun pembuatan: 2025, Kondisi: baru, Instalasi penyaring debu yang mudah dirawat, dirancang khusus untuk debu sandblasting yang agresif dengan ruang prakamar–pemecah benturan, paket lengkap yang terdiri dari: a) 1 unit filter kering cartridge, tipe PF 1.4.B62.00, kapasitas 5000 m³/jam (ukuran lain tersedia), terdiri dari bodi pelat baja 3 mm yang kuat dan kedap vakum, dibagi dalam ruang gas mentah dengan cartridge filter, prakamar dengan pemecah benturan, serta ruang gas bersih dengan sistem pembersihan filter menggunakan tekanan udara, masing-masing dengan pintu perawatan terpisah tipe Easy Open. Corong pengumpul debu dengan katup celah untuk pembuangan debu menggunakan big bag. Kontrol katup magnetik dengan indikator tekanan diferensial untuk pengaturan optimal sistem pembersihan cartridge filter. Guedpolxyhfjfx Aazjf Pintu perawatan model ayun untuk kemudahan servis.

Kondisi: baru, Tahun pembuatan: 2026, masa garansi: 12 bulan, lebar total: 2.300 mm, panjang total: 1.300 mm, tinggi total: 2.450 mm, jenis arus masuk: tiga fasa, Powder coating booth, paint wall, extraction unit TQN2020 Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) Gujdpfxjd S N Sze Aazjf SPECIFICATIONS: • Fan power: 2.2 kW • Capacity: 10,500 m³/h • 3 x 100% polyester filters • Filtration efficiency: 99.9% • IP66 control panel • Automatic filter cleaning • Hermetically sealed lighting, IP65 • Paint container Booth available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Top-quality machines among those available on the market. Professional advice and service. Warranty coverage. Warranty and post-warranty support. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are CE-certified. We provide our own transport – prices are quoted individually for each offer. Invoices issued with stated VAT. Short delivery times! Option to order machines in various custom configurations and sizes! Please contact us.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Drum Blast Machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3,000 m³/h Gujdpforq Hmzjx Aazef Max. batch weight: approx. 1,000 kg Type: Sinter-plate filter Other Details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting machine Abrasive (material and size): Wire shot Abrasive quantity (initial fill): approx. 1,000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. drum load: 250 kg Max. single piece weight: 5 kg Capacity: 150 liters Max. loader lifting capability: 480 kg Sound pressure level without sound enclosure: ≤ 85 dB(A)

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Air handler dengan teknologi EC untuk pendinginan atau pemanasan ruangan, kapasitas pendinginan dengan unit chiller 150 kW pada 7/12°C, kapasitas pemanasan 300 kW, aliran udara 20.000 m³/h, 4 outlet udara 500 mm, desain kompakt. Gedpfx Ajfzrgyoazeuf

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, panjang total: 6.000 mm, lebar total: 2.430 mm, kapasitas angkut: 4.000 kg, tinggi kerja: 6.000 mm, tinggi angkat: 6.000 mm, Perlengkapan: dokumentasi / manual, Derek atas Abus – Tipe: rangka tunggal – Kapasitas: 4.000 kg – Tinggi pengangkatan: 6 m – Tahun pembuatan: 2021 – Tipe pengangkat: pengangkat tali kawat – Pengangkat FEM/ISO: 3m / M6 Dimensi – Lebar: 6.000 mm (tengah ke tengah) – Tinggi pemasangan: 350 mm – Lebar set roda termasuk bumper: 2.430 mm – Jarak sumbu roda: 1.900 mm Gusdpfoy A Huasx Aazsf – Berat: 1.310 kg – Cocok untuk rel derek: 50×30 mm Kecepatan – Pengangkatan: 0,39 hingga 4 m/menit (variabel) – Pergerakan troli: 1 hingga 20 m/menit (variabel) – Pergerakan derek: 1 hingga 20 m/menit (variabel) Fitur – Kontrol: kontrol radio – Buku panduan derek disertakan: ya – Kondisi: seperti baru, hanya digunakan selama 2 tahun – Dibongkar: awal Mei 2026 – Tersedia 5 unit – Struktur baja dan sistem konduktor juga tersedia (34,5 m)

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: 2021041406, Aluminum incline conveyor with supporting frame Dimensions: approx. 2000 + 2000mm Gusdpfx Aeg Ez I Hjazef Discharge height: 1600mm (example) Height of the horizontal section: 200mm (example) Conveyor belt: green, 2-ply, particularly cross-stable, endless spliced with stepped joint * Antistatic due to threads in the underside fabric Drive, motor control optional Stainless steel hopper - material infeed

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Absorption chiller (AKM) with cooling tower Karlsruhe KRD 1/12-28-3. Cooling capacity: 214 kW, permissible temperature: 10–60°C, max. overpressure: 1 bar, nominal flow rate: 87.1 m³/h, equipped with Wolter GmbH TRZ 900/80 KTK radial fan and Carrier SCS 16LJ-03E-LC absorption chillier. Guedpfx Asn Tpmqeazsf

Kondisi: baru, Tahun pembuatan: 2026, New Optimizing Saw SALVACUT 5000 by SALVAMAC Innovative high-speed optimizing saw for defect removal and wood optimization, featuring double drive with upper feed rollers and lower feed belt with independent control. Developed from an idea by Salvador Christian. Gsdpfxon E Sl Ro Aazjuf

Kondisi: bekas, Tahun pembuatan: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing: Due to its vertical orientation, this machine series is by far the most flexible and productive machine at a very high quality level. In addition, the automatic return/rotation system for the panel enables fully automatic operation. The machine can process all 6 sides of a panel up to a height of 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system using a PC with TPA Albatros software. The programming editor with high-level software interface enables simple and intuitive programming of the machine and also supports: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Tool diameter optimizer for turret tools * Optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * Import of work lists in ASCII format * Extra key for programming from the office * Barcode reader for tools * 17-inch LCD monitor * Professional operating system: Windows 7 Panel feeding and handling is managed via motorized vertical transfer with rollers and rubber-coated pressers to clamp the panel during processing; the motorized conveyor is 2000 mm long with electronically adjustable speed via inverter control. Photocells and the NC program ensure the introduction of one or more panels in sequence with selector selection. Height reading system for the panels consisting of an independent axis that can read the panel height before entering the machine. Reading tolerance of the dimension +/- 0.15 mm; if tolerance is exceeded, an alert is issued and the machine stops the current operation. Gjdpfxjl Ikzgo Aazouf System for reading panel thickness with a mechanical probe. Horizontal vice – M.O. axis: allows thickness of the workpiece to be measured by the program. Vertical vice – M.V. axis: allows the program to measure the height dimensions of the workpiece to be machined. Chain – X axis – patented double section with laser photocells that can read the reference zero point before performing operations. The double section allows processing on the underside of the panel, allowing machining on all 6 sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm: 24 independent spindles with a 32 mm pitch, arranged as follows: * 7 spindles aligned on the X axis * 17 spindles aligned on the Y axis Unit driven by a high-frequency motor enabling spindle rotation speed changes up to 7000 rpm. The brushless motor allows control of drilling depth and feed rate. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct drive transmission to the tool up to 18,000 rpm. The rotation of the turret is performed by a controlled axis with a brushless motor, enabling...