Hacker

Klockner 160X400B2WT

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversized roller bearings Bearing housing: steel, flange housing Hnodpfx Aoncd Azja Nog Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Wood chipper for sawmill offcuts LINDNER type T 400/140-2 – After technical inspection – Very good condition – Suitable for producing industrial wood chips TECHNICAL SPECIFICATIONS: Feed opening width: 400 mm Hnsdpfx Aor Ak Rgja Nsg Feed opening height: 140 mm Rotor diameter: 450 mm Rotor length: 400 mm Main motor power: 33 kW Feed motors power: 2 x 1.5 kW Number of knives: 2 pcs Screen mesh size: 60 mm x 90 mm Feed rollers in very good condition Feeder drive motor power: 1.5 kW Feeder length: 4,200 mm Transport dimensions (L/W/H): 430 / 240 / 150 cm Weight: approx. 2,000 kg

Kondisi: baru, Tahun pembuatan: 2025, daya: 45 kW (61,18 hp), msk-tech-2024-06-12-01 Hnsdpfx Aajtpwrme Neg

Tahun pembuatan: 2026, Kondisi: baru, VKM - Package Singulation for Milled Timber Hnjdog Rxhgspfx Aa Njg With the singulation of milled timbers, whether loosely stacked or bundled, already milled timber can be processed further in a cost-effective manner. In a two-stage process, the timber is singulated for subsequent processing. It is also possible to automatically feed the singulated timber into a continuous process. The feeder is mechanically designed to reliably process even warped timber. Furthermore, it can be adjusted to the diameter of the timber to ensure that only a single piece is transported at a time, preventing blockages or downtime further along the processing line.

Tahun pembuatan: 2025, Kondisi: baru, From Linear to Combination Weigher Application: Accurate dosing of free-flowing products into precise quantities. Features of the Weigher - Easy operation - Fast and hassle-free cleaning - Low maintenance requirements - Tool-free (de)mounting of all product-contact parts - Low maintenance requirements - Corrosion-resistant stainless steel construction (1.4301) - Integrated control unit within the machine housing - Stepless vibration system for optimal product flow - High accuracy through multihead combination Technical Specifications Hjdpfsq T R Sbox Aa Nsng - Number of weigh heads: 10 - Weighing container: 2.5 l - Weighing range: 10 – 1000 g / 2,500 g - Accuracy: ±0.2–1.5 g - Speed: up to 60 bags/min (depending on product) - Operating panel: 7" touch screen display - Power: 1 kW / 230 V / 50 Hz - Dimensions (LxWxH): 1620 mm x 1100 mm x 1110 mm - Machine weight: 380 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Klockner 120x400 H-2WT Chipper – German-made – Shaft condition: very good TECHNICAL SPECIFICATIONS: Feed opening width: 400 mm Feed opening height: 120 mm Number of knives: 2 Rotor diameter: 420 mm Main motor power: 30 kW Infeed motor power: 2 x 2.2 kW Lower feed roller: toothed, driven Upper feed roller: toothed, driven Screen: 20 mm diameter Infeed conveyor length: 2600 mm Transport dimensions (L/W/H): 300 / 245 / 170 cm Weight: 1500 kg Hnodpjthfm Usfx Aa Njg

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, de Hnedpfswwzudjx Aa Nog

Tahun pembuatan: 2026, Kondisi: baru, The pointing machine was primarily developed for small and medium-sized production runs with manual feed, featuring the following technical specifications. Sometimes things can be quite simple: the mechanical pointing machine was specifically designed for quick and convenient loading with manual feeding. For powering the hydraulic pump, the machine can be supplied either with a 7.5 kW electric motor or a PTO (power take-off) shaft connection. This makes it ideal for producing small and medium quantities of fence elements, wooden posts, and palisades. Perfect for flexible landscaping or time-sensitive timber construction projects. The machine is capable of processing any type of milled or peeled timber. Even curved small-diameter logs or debarked trunks are no challenge for the sharp knives. - Maximum wood diameter: 270 mm - Minimum wood length: 1.15 m - 5 selectable pointing angles - For milled, peeled, and untreated timbers Hjdpfx Aasfw A D Ns Neng - Capacity: 150 to 250 posts/hour - Cylinder force: 2 x 10 t - Oil pressure: 200 bar - Drive options: - 7.5 kW electric drive - PTO shaft - Tractor oil pump

Kondisi: baik (bekas), Tahun pembuatan: 1994, Drum chipper, high-speed model with horizontal feed Maximum infeed width: 300 mm Maximum infeed height: 85 mm Motor: 18.5 kW Frequency-controlled for variable speed Without vibrating chute Hnjdpfju Rl Sfex Aa Njg

Kondisi: sangat baik (bekas), 7259 Hjdpfx Asrit Nlea Nsng