Mesin penggiling silinder

Knuth RSM 500

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, The frames of the machines from the RSM series feature a heavy-duty design and long, supported guideways. The table can rotate, and the precisely adjustable hydraulic feed moves smoothly along the longitudinal axis. WORKING AREA Height between centers: 135 mm Workpiece length: 640 mm Grinding length: 500 mm Grinding diameter: 8 mm - 200 mm Internal diameter without support: 25 mm - 100 mm Workpiece weight between centers (max.): 50 kg Internal grinding depth: 125 mm Table swivel range (max.): -3° / +9° right/left Peripheral speed: 38 m/s DIMENSIONS AND WEIGHTS Grinding wheel dimensions: 400 mm x 50 mm x 203 mm Internal grinding wheel dimensions (max.): 50 mm x 40 mm x 16 mm Grinding wheel dimensions (min.): 45 mm x 35 mm x 10 mm Lhsdpfx Aljri Ngyjksf Machine dimensions (length x width x height): 2.5 m x 1.6 m x 1.5 m Weight: 2500 kg

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A Spinner simultaneous turning center with three turrets and comprehensive accessories, spare parts, and tooling is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm. Rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700 rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: stations: 3x12, speed: 8,000 rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2,880mm/2,130mm/1,990mm. Weight: approx. 7,500kg. Operating hours: 27,102h. Control: Fanuc 31i. Including Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, an extensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Lodpfx Aloua E Trekjhf

Tahun pembuatan: 2022, jam operasional: 108 h, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: SN2120, EDM312MF30-SLM (second-life machine) Technical Specifications: Travel paths: 450x300x300 mm Workpiece clamping table: 820x400 mm Tank size: 900x520 mm Filling height: 300 mm Distance table/electrode holder: 150/450 mm Max. workpiece weight: 800 kg Max. dielectric fluid volume: 700 l Dimensions (W x D x H): 2700x1800x2350 mm Machine weight: 2500 kg Power supply: 3/N/PE 400/230V 50Hz Power consumption: 6.7 KVA Features: Color: Newly painted light grey + tele grey New control cabinet New APC910/2 control unit (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A Rev.4 generator 5-fold tool changer Touch guard operable by button Linear scales on all axes X, Y, Z (Fagor) Lodpfehtrdyox Alkshf 2 cartridge filters Termogamma chiller Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling button Automatic tracking lowering tank Chuck: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Kondisi: baik (bekas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre height: 125 mm Centre distance: 400 / 700 / 1025 mm Maximum longitudinal slide travel: 400 / 700 / 1000 mm Longitudinal Slide Table speed: 50 – 5000 mm/min Reversal delay: 0-6 s Minimum automatic feed: 1.5 mm Maximum travel: 400 / 700 / 1020 mm Maximum table swivel angle: 12 / 30 / 78° Cross Slide Swivel range: ±45° Rapid traverse: 40 mm Handwheel feed travel: 20 mm Maximum plunge depth: 1.7 mm Grinding Spindle Headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Rotational speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece Spindle Headstock Swivel range: 0 – 90° Speed range: 30 – 675 rpm Mounting taper: Morse 5 Collets: W25 Tailstock Lhedpfx Alevca Izjkef Mounting taper: Morse 3 Quill stroke: 30 mm Total power requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or currency of the information provided.

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Lhsdpfxet Hw S Ie Alkef Max. workpiece weight / table load approx.: 200 kg Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Lodpfx Astqf Rzolkohf Feed Drive via DC Motor Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119/020.0895, Asal pabrikasi: Swiss (CH) Tegangan: 400V Lhedpfx Aolbgfcslkef Dimensi: 2700x2350x2100 mm Berat bersih: 4500 kg DATA TEKNIS Kontrol: Fanuc 16i-T Tinggi senter: 175 mm Jarak antara senter: 1000 mm Sumbu Linear Panjang penggerindaan: 500 mm Rentang gerak: X: 267 mm, Z: 650 mm Kepala Spindel Gerinda Sudut putar tak terbatas: +/- 8,5° Dimensi batu gerinda luar: 500x80x203 mm Daya: 7,5 kW Kecepatan: 44 m/detik Kepala Spindel Benda Kerja Tipe tirus: MK5 Sumbu C: +/- 5° Daya: 1 kW Putaran: 30-1000 min-1 Dudukan Ekor Tipe tirus: MK3 Jarak gerak pinole: 35 mm Diameter pinole: Ø 50 mm Berat maksimum benda kerja: 130 kg Catu Daya Tegangan: 400V 50 Hz Data teknis diberikan tanpa kewajiban, kesalahan atau perubahan mungkin terjadi.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, berat benda kerja (maks.): 130 kg, panjang penggilingan: 1.500 mm, diameter roda gerinda: 500 mm, lebar total: 2.155 mm, panjang total: 5.465 mm, tinggi total: 1.700 mm, diameter penggilingan: 300 mm, lebar roda gerinda: 63 mm, de-172675 Ljdpsx A Dfysfx Alkehf

Kondisi: bekas, es-en Lhjdpfx Aloxxmcgjkef

Kondisi: hampir baru (bekas), The MSP 120 ZK is optimally suited for the shredding and subsequent briquetting of various types of metal chips. Lhodjw R Ranepfx Alksf The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip press and a pre-mounted shredder, which are precisely matched to each other. This system enables the shredding and compaction of chips produced during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) that were absorbed during previous machining processes. The plant consists of a feed hopper for loading the material to be processed and an integrated shredder inside, which reduces the length of the metal chips. A conveyor system continuously transfers the shredded chips via a conveyor belt into the hopper of the chip press. There, two augers feed the material into the compaction chamber. The system features a monitored liquid collection tank and a pump. The cooling agents can be returned to the production process. The cycle control is managed via a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device for manual loading of the system can be added as needed. Briquetting press: Throughput (aluminum): 15-20 kg/h Throughput (steel, copper): 45-60 kg/h Briquette diameter: 60 mm Productivity: 120-180 pcs/h Specific pressure on briquette: 1,050 kg/cm3 Motor pump output: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 piece Motor output: 5.5 kW Number of blades: 16 pcs Blades replaceable: yes Blade size: 25 mm Blade material: hardened steel Shaft length: 400 mm Screen perforation: 20 mm Feed hopper diameter: 1,000 mm Hopper volume: 1 m3 Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Structured lacquer RAL 7035 light grey