Mesin bubut konvensional - Servoturn 500/1000

Knuth Servoturn 500/1000

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Codpfx Agskvnume Djgt Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop • Base frame Cgodpfx Agod Du T Is Det • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3.000 kg, Berat Rotor Maksimum --- 3000 kg (6613,87 lb) Berat Rotor Minimum --- 30 kg (66,14 lb) Diameter Rotor Maksimum --- 1400 mm (55,12 in) Diameter Poros Minimum --- 20 mm (0,79 in) Diameter Poros Maksimum --- 300 mm (11,81 in) Daya Motor --- 11 kW (14,75 HP) Unit Penggerak (Standar) --- 11 kW (14,75 HP) Kecepatan Penyeimbangan --- 0-3000 Rpm (25 Hz) (dapat disesuaikan naik turun) Unit Penggerak --- Sabuk saja atau Poros / Sabuk + Poros Panjang Ranjang --- 3000 mm (118,11 in) Cgodpfxor Dd Ave Ag Dot

Kondisi: baik (bekas), Tahun pembuatan: 2013, 87546a17 Cgjdpfjynmpyox Ag Det

Kondisi: bekas, Clamping plate, scribing/marking plate, surface plate, measuring table, welding table, straightening plate - Clamping plate comes from a measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate is reinforced with support ribs - Includes 4 adjustable leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm Cgodpfx Ajfc T Tqsg Dot - Weight: 2749 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, diameter pembubutan: 330 mm, lubang spindel: 41 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, daya motor spindle: 11.000 W, diameter quill: 50 mm, gores kuas bulu: 110 mm, diameter pembubutan di atas alas geser: 435 mm, berat keseluruhan: 1.400 kg, tinggi pusat: 165 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: Cycle-controlled WEILER E30X750 CNC lathe featuring Siemens 810 D control unit. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully operational Location: Austria (Graz) Inspection: On-site or via video call by arrangement Pictures/Video: Additional images and videos of the machine in operation can be provided upon request. Power-on hours (machine powered): 26,492 h. The actual operating hours are significantly lower. Based on experience, spindle running time (actual turning) is typically only about 30% to 50% of this (approx. 8,000 to 13,000 hours). Technical Specifications: Cgodpevphv Tefx Ag Dot Working Area: Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Centre distance: 750 mm Spindle: Spindle head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle front bearing diameter: 70 mm Max. spindle torque: 180 Nm Main Drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / Rapid Traverse Feed Drive: Three-phase AC feed drives Feed range (infinitely variable): Longitudinal: 0.001–50 mm/rev (additionally specified: 0–20 mm/rev) Cross: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (additionally specified: 10 / 7.5 / 5 / 3.5 m/min) Thread Cutting Range: Metric threads: 0.1–2,000 mm Imperial threads: 112–1/64 TPI Tailstock / Quill: Quill diameter: 50 mm Quill travel: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Please contact us for more information or to arrange a viewing appointment.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 82 mm, diameter pembubutan: 820 mm, panjang pembubutan: 6.000 mm, GURUTZPE lathe, model Super A, with 6,000 mm between centers, swing over bed 820 mm, over carriage 550 mm, in the gap 1,150 mm, spindle bore diameter 82 mm, powered carriage, 16 speeds from 9 to 500 rpm, equipped with 3 fixed steadies. Codpfx Aev Rm Iwsg Dsgt

Kondisi: bekas, nomor mesin/kendaraan: 916183, Tahun pembuatan: 2012, jam operasional: 2.526 h, tinggi angkat: 5.500 mm, jenis bahan bakar: diesel, daya: 55 kW (74,78 hp), produsen motor: Perkins, tipe perpindahan gigi: hidrostatik, 20240613-001 Cjdpjtvlqxofx Ag Dsgt

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, kecepatan spindel (min.): 18.000 rpm, kecepatan spindel (maks.): 2.800 rpm, diameter pemasangan: 300 mm, panjang umpan sumbu Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical part machining The CNC lathe with 2 independent working units and numerical control is a modern solution for machining cylindrical wooden parts—such as columns, table legs, or decorative elements—offering accuracy, repeatability, and efficiency in any workshop or production environment. Double performance with independent units Csdpfewhbguex Ag Dsgt Equipped with two working heads that can operate simultaneously or independently, the lathe enables rapid processing of parts up to 1200 mm in length. It is ideal for series production of furniture components, church elements, or decorative items. Robust construction for long-term durability The thermally treated welded bed made of rectangular profiles delivers stability and resistance to torsion. Linear guides on X, Y, and Z axes ensure precise, vibration-free movements. Precision through CNC control Hybrid servomotors and a rack-and-pinion system offer exact positioning and efficient control across all axes. The manually adjustable tailstock with four holding points ensures excellent stability during complex operations. Advanced motors and cooling Water-cooled motors enable operation at spindle speeds up to 18,000 rpm without overheating, ensuring consistent workflows and extended service life. Advanced DSP control The DSP controller with built-in memory allows for fast file imports, project resumption from the stopping point, and real-time parameter adjustments—ideal for a continuous and efficient production flow. Auxiliary precision and maintenance systems Self-centering chucks securely hold the parts, while optical sensors and an automatic lubrication system ensure precise machining and minimal maintenance. Key advantages - Perfect repeatability, even in high-volume production - Flexible operation with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Maximum turning diameter (Ø): 300 mm Number of working units: 2 pcs Control: DSP Spindle speed: 0 – 2800 rpm Main motor power: 4.5 kW Milling spindle speed: 18,000 rpm Inverter: “BEST” inverter Drive motors: Hybrid servomotors Max feed rate: 50 mm/s Accuracy: 0.0125 mm

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-AT Cgedpjvbcbusfx Ag Dot