Granulator GA 75

Koch GA75 /9

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration Machine Available at a Special Price Our Granulator MVZ 7.5 is ideal for shredding thin-walled plastic components or for secondary reduction of wood chips. More details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Both shredders and granulators are suitable for various size reduction applications. For example, in injection molding operations, scrap parts and sprues are produced which need to be recycled. In blow molding, in addition to defective parts, flash and start-up purges need to be processed. The machine can easily handle blow molding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the granulator’s chamber. The chamber contains a rotor equipped with cutting knives. Material is shredded between the rotating knives and the stationary knives mounted in the cutting chamber housing, until it reaches the defined granulate size and falls through a screen located beneath the rotor. Lhedpfx Aod N Dn Dsd Njp *Option: The regrind is typically conveyed pneumatically into Big Bags, silos, or other containers. The price applies only to the granulation system as shown in picture 1. - Fan, cyclone and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput: up to 120 kg/h when processing plastics *strongly dependent on screen size and material Application Example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length After secondary shredding: approx. 6 mm Throughput: up to 50 kg/h with 6 mm screen (Throughput: up to 80 kg/h with 8 mm screen) In G30 wood chip refinement, significantly higher throughput rates are possible. Up to a maximum of 400 kg/h with a 10 mm screen. *metered feed e.g., via conveyor belt or auger Further details following a trial with approx. 30 kg material. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 fixed knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 6, 8, and 15 mm – other sizes available on request Price per screen: €390 Replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, injection scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units also available as options: Granulator MVZ / 18.5 kW Throughput: up to 350 kg/h *dependent on screen and material Infeed opening: 620x400 mm Special net price: from €24,995 (net) *Optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput: up to 400 kg/h *dependent on screen and material Infeed opening: 620x500 mm Special net price: from €29,795 (net) *Optional with matching extraction/conveying system --- For optimal machine configuration, please provide the following information: - Length x width x height of the input material? - Desired final granulate size in mm (screen size)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Kondisi: baru, Granulator Manufacturer: NEUE HERBOLD Year of manufacture: NEW MACHINE Drive: 75 kW Rotor diameter: 600 mm Working width: 1000 mm Rotor with 5 rows of blades Lhsdockg Nzspfx Ad Njp 2 stator knife rows Conveyor belt feed hopper Suitable for size reduction of film waste, canisters, pipes, profiles, punched skeletons, bumpers, ...

Kondisi: bekas, Technical details: Drive motor: 4 kW Speed: 14 rpm Voltage: 380 V / Hz Weight: approx. 0.5 t Chip crusher - Shredder 2-shaft crusher Current feed opening: 400 x 360 mm Crushing tools: 8 pieces per shaft Current discharge size: L: 350 x W: 250 mm Gear motor manufacturer: Vector Lsdpfxsu Nxrpj Ad Nshp Accessories: 2 crusher discs

Kondisi: hampir baru (bekas), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Max. working width: 300 mm • Max. working height: 140 mm • Electronic stepless feed: 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors with electronic braking • COMPLETELY NEW MILLING SPINDLES • Spindle diameter: 50 mm • Spindle speed: 6,000 rpm • 6 driven rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 with pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5m cable • NEW free-standing control cabinet, 5m cable Lhjdjtynpxspfx Ad Nep • Operating manual, spare parts list, and wiring diagram + Many NEW spare parts / accessory components Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power supply: • Total connected load: approx. 157 kW Condition: Machine as shown in the photos – technically as new Payment: Payment in full prior to loading, net, cash in advance Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers and inquiries only with complete company details Subject to prior sale and errors excepted.

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lift table Control: MCS Evolution Software included Lift table (mm): No. 1 Rear Sliding Device Ledpfxep R Sdho Ad Nshp Program-controlled Pusher Device No. 9 Gripper Clamps Max. cutting width (mm): 3300 Pusher effective stroke (mm): 3300 Max. saw blade projection (mm): 105 Max. gripper opening (mm): 105 Scoring saw (max. blade diameter, mm): 200 Main saw (max. blade diameter / power): 360 mm / 18 kW Adjustable saw carriage feed rate (m/min): 5–120 No. 3 Front Air Cushion Tables Total connected load (kW): Approx. 21

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Type: 60 X 33 Lhjdpfx Adeifgwhj Nep Year of manufacture: 2000 Screw diameter: 60 mm Drive: 75 kW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, operational The extruder is my property. Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SK-K-24001, 1 optimised cross-cutting system with scanner manufacturer: dimter type: opticut 450 year of manufacture: 2015 item no.: sk-k-24001 Lhedpfxewya Sys Ad Nsp dimter cross-cutting system with 1 x opticut 450 and f 100 infeed system including luxscan combiscan+ c 200 with curvature measurement the system was in operation until 2024, has been professionally dismantled, and is available for inspection in its current condition.

Kondisi: bekas, nomor mesin/kendaraan: 12599, Rotor diameter: 600 mm Rotor width: 1,450 mm 12-knife rotor Lodpfok N Iy Nox Ad Nehp 3 rows of stator knives Infeed cross-section approx. 780 x 1,490 mm Drive motor: 132 kW

Tahun pembuatan: 2025, Kondisi: baru, We also offer leasing and financing options. Feel free to contact us! For all types of recycling, we have shredders and other recycling machinery in stock in Heilbronn. From copper recycling to plastic recycling, you can purchase all necessary machines from us. Don't hesitate to ask. ‼️IMMEDIATELY AVAILABLE ‼️ IN STOCK‼️ Shredder for pre-shredding cables, plastics, etc. – UNIVERSAL SHREDDER. ➡️ Motor: 11 kW ➡️ Shaft length: 40 cm ➡️ Voltage: 380V, 60 Hz, 3-phase ➡️ Dimensions (LxWxH): 1350 x 700 x 1600 mm ➡️ Weight: approx. 800 kg Lodep E Eiyopfx Ad Njhp Net price: €13,999.00 +19% VAT: €2,659.81 Gross price: €16,658.81 All information subject to change. Images may differ from the original.

Kondisi: bekas, nomor mesin/kendaraan: 12248, Rotor diameter: 300 mm Rotor width: 600 mm Lhjdpjh Dxtfsfx Ad Njp 3-knife rotor 4 rows of stator knives Infeed opening approx. 300 x 600 mm Drive motor: 37 kW