Mesin cetak kolom ganda

Komatsu 500 QP - 5125

Kondisi: bekas, Tahun pembuatan: 1981, de-to-hu-it-lt-001 Knjdpfxeu Sbdgo Aayjd

Kondisi: bekas, Tahun pembuatan: 2018, de-hu-001 Kjdpfjw D Hkdex Aayond

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h Kedpfx Aaou Thbxoyond - 100 kg/m³ approx. 9.7 t/h Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive power: 4.0 kW Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Knsdsu Thypspfx Aayed Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 35.000 kg, gaya penekanan: 250 t, jenis arus masuk: tiga fasa, daya: 30 kW (40,79 hp), gaya punching: 250 t, tegangan masuk: 200 V, Perlengkapan: penghadang cahaya keselamatan, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Shut Height Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Power: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dispensing – RAZIOL EST-02 Kedpfxeu Dxb Ts Aayond Optionally available with decoiler and straightening machine.

Kondisi: baik (bekas), Tahun pembuatan: 1989, tinggi total: 6.450 mm, For sale: Beche short-stroke drop hammer KGH 4B. Machine weight: 65 t Working energy: 40 kJ Ksdpfx Aajrt Uc Eoyend Max. blow frequency: 98/min Max. usable stroke rate: 41/min Max. ram stroke: 790 mm Machine is dismantled. Technical data available upon request.

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Side Frame Passage 820x650 mm Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Extendable Table Plate Hydraulic Roll Block Rails in Table Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Intermittent Airing, Height Adjustment via Gear Motor Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Kedpjrdi Dljfx Aayond Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ram area 350 x 355 mm Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Additional information: Knedpfxodlcy Hs Aayod - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Kondisi: bekas, Tahun pembuatan: 1998, de-fi Kodpfjwcc Dkex Aayond

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, La machine est toujours en production. Elle peut être inspectée en Grèce. Elle est prête à être utilisée. Knodpev A I E Isfx Aayod