Mesin pembengkok pelat tiga rol

Kramer RH II 80/1000

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: 01-15792, Offer 24194 Technical Specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 – 135° - Bending angle lockable with end stop - Upper beam operated via side handwheel - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by counterweight - Required space: approx. W 3250 x H 1250 x D 450 mm Itodpfx Aetylguea Nsb - Weight: approx. 1620 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, tinggi total: 2.100 mm, lebar total: 2.100 mm, panjang total: 2.300 mm, lebar meja: 450 mm, panjang meja: 750 mm, kecepatan rotasi (maks.): 4.500 rpm, kecepatan rotasi (min.): 1 rpm, berat keseluruhan: 1.900 kg, berat benda kerja (maks.): 500 kg, Travels X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, Heidenhain TNC 320 control system, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Itedswb Erzopfx Aa Neb

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Iedjqzkdmspfx Aa Netb

Kondisi: bekas, Tahun pembuatan: 1998, slz570-quotation-en Itedpjugawfjfx Aa Njb

Kondisi: bekas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Iodpfx Aaedzqblj Netb Seaming machine for pre-bending of sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. The folding produces a rounded edge that reduces the risk of injury from cuts on the sharp sheet edges. Ideal for sheet metal processing in furniture manufacturing, cladding panels, or for ventilation and silencer construction.

Kondisi: bekas, Tahun pembuatan: 1980, PIPE BENDING MACHINE LANG TYPE EL90 Ø 90 Isdpfx Aerq D N Rsa Notb

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Iodpfx Aefxyhfea Njtb Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 1976, Kondisi: baik (bekas), Bandwidth: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Itsdpfx Aobh Ubwsa Nob Coil weight: 12.5 t Mandrel Ø: 508 mm

Kondisi: sangat baik (bekas), IMM 72780 Double-Sided Polishing Machine Like new condition, the machine has seen very little use. TECHNICAL DATA Polishing disc: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg Ijdpfxsu Hanyo Aa Nstb No guarantee is given for the correctness, completeness or timeliness of the information provided.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar di tengah: 390 mm, tinggi pusat: 310 mm, berat keseluruhan: 61 kg, tegangan masuk: 230 V, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 3.500 rpm, penjepit spindle: MK 2, daya: 0,75 kW (1,02 hp), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast hand rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Hand rest edge made of hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejecting pin and key for tightening the faceplate. • Pre-drilled holes for headstock lighting. • Easy accessory mounting: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! Itedpfx Aetuuv Noa Nob The medium-sized LAGUNA 1216 lathe is distinguished especially by its robust components: cast iron construction of headstock and tailstock, precision-ground lathe bed, and tool rest with a durable, hardened steel edge. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50-525, 325-1750, 650-3500 rpm. Infinitely variable speed adjustment via Duralumin regulator and 3-step belt change using a simple lever mechanism. The motor technology provides high torque even at low speeds. Tailstock lock at the rear: stays out of the way during work, yet easily accessible. Ergonomic handles with eccentric clamping for very secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50-525, 325-1750, 650-3500 rpm • Max. turning diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock quill bore: 17 / 17 mm • Tailstock quill travel: 63 mm • Tool rest shaft size: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions incl. packaging: 750 × 226 × 442 mm • Weight incl. packaging: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Driving center • Live center • Faceplate • Tool rest • Ejecting pin with brass tip • Spindle locking key