Mesin bubut

LANDONIO TMU 1200

Kondisi: bekas, Landonio TMU 1200 tornio Djdpfeizxvkex Ahujur

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar di tengah: 390 mm, tinggi pusat: 310 mm, berat keseluruhan: 61 kg, tegangan masuk: 230 V, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 3.500 rpm, penjepit spindle: MK 2, daya: 0,75 kW (1,02 hp), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast hand rest. Djdpfx Astuuv Njhusur • Induction motor delivers high torque even at low speeds. • Digital speed display. • Hand rest edge made of hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejecting pin and key for tightening the faceplate. • Pre-drilled holes for headstock lighting. • Easy accessory mounting: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The medium-sized LAGUNA 1216 lathe is distinguished especially by its robust components: cast iron construction of headstock and tailstock, precision-ground lathe bed, and tool rest with a durable, hardened steel edge. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50-525, 325-1750, 650-3500 rpm. Infinitely variable speed adjustment via Duralumin regulator and 3-step belt change using a simple lever mechanism. The motor technology provides high torque even at low speeds. Tailstock lock at the rear: stays out of the way during work, yet easily accessible. Ergonomic handles with eccentric clamping for very secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50-525, 325-1750, 650-3500 rpm • Max. turning diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock quill bore: 17 / 17 mm • Tailstock quill travel: 63 mm • Tool rest shaft size: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions incl. packaging: 750 × 226 × 442 mm • Weight incl. packaging: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Driving center • Live center • Faceplate • Tool rest • Ejecting pin with brass tip • Spindle locking key

Kondisi: sangat baik (bekas), Genini Miniautomat Through-Feed Lathe Square Timber Turning Automatic Machine Main spindle equipped with a two-speed motor, output: 4.9/5.9 kW Hydraulic pump motor: 1.5 kW Maximum workpiece length (square timber): 950 mm Maximum turning length: 120 mm Dedpfx Ahsv Hgcteueur Maximum turning diameter: 80 mm Two supports with profiling knives 1 face spindle for drilling or face profiling 1 rough turning knife Machine weight: approx. 1800 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. Duodpfsuiy Nysx Ahujr The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm Dedpfx Aorigxyjhueur 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 Dedpfjvu Hgbsx Ahujur ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, kecepatan spindel (min.): 18.000 rpm, kecepatan spindel (maks.): 2.800 rpm, diameter pemasangan: 300 mm, panjang umpan sumbu Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical part machining The CNC lathe with 2 independent working units and numerical control is a modern solution for machining cylindrical wooden parts—such as columns, table legs, or decorative elements—offering accuracy, repeatability, and efficiency in any workshop or production environment. Double performance with independent units Equipped with two working heads that can operate simultaneously or independently, the lathe enables rapid processing of parts up to 1200 mm in length. It is ideal for series production of furniture components, church elements, or decorative items. Robust construction for long-term durability The thermally treated welded bed made of rectangular profiles delivers stability and resistance to torsion. Linear guides on X, Y, and Z axes ensure precise, vibration-free movements. Precision through CNC control Hybrid servomotors and a rack-and-pinion system offer exact positioning and efficient control across all axes. The manually adjustable tailstock with four holding points ensures excellent stability during complex operations. Advanced motors and cooling Water-cooled motors enable operation at spindle speeds up to 18,000 rpm without overheating, ensuring consistent workflows and extended service life. Advanced DSP control The DSP controller with built-in memory allows for fast file imports, project resumption from the stopping point, and real-time parameter adjustments—ideal for a continuous and efficient production flow. Dujdswhbguopfx Ahuor Auxiliary precision and maintenance systems Self-centering chucks securely hold the parts, while optical sensors and an automatic lubrication system ensure precise machining and minimal maintenance. Key advantages - Perfect repeatability, even in high-volume production - Flexible operation with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Maximum turning diameter (Ø): 300 mm Number of working units: 2 pcs Control: DSP Spindle speed: 0 – 2800 rpm Main motor power: 4.5 kW Milling spindle speed: 18,000 rpm Inverter: “BEST” inverter Drive motors: Hybrid servomotors Max feed rate: 50 mm/s Accuracy: 0.0125 mm

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Passage width: 170 mm Speed: approx. 25 m/min Direction of operation: optional Duedsp E Egljpfx Ahuor Working roller diameter: 120 mm Bale length: 150 mm Support rollers: support block/chain

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel, X-axis: 350 mm Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Dedpfx Ahjgyy I Ajujur Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: baru, Tahun pembuatan: 2026, Variable adjustable paint rotary table Dusdpfx Ahsbzmagouor • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms • Height adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality Can be shipped by UPS by us. Requires assembly upon delivery. Location: ex stock Bitburg