Pusat permesinan - horizontal

Krauseco-Mauser FS 630-5

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° Kjdped Iin Hefx Ai Ijnb - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Tahun pembuatan: 2023, Kondisi: baru, nomor mesin/kendaraan: PRJ065955, ALZMETALL bench drilling machine, drilling capacity in steel: 12mm Chuck mount: B16 external taper, spindle stroke: 40mm, throat: 200mm, column diameter: 50mm, machine table usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max.: 110/250mm, manual feed, machine height without options: 670mm, net weight: 64 kg. - Infinitely variable speed 250-5000 rpm Standard equipment: 5" TFT LCD display with touch function: manual entry of target spindle speed, actual speed indication, integrated drilling depth display with touch zero point setting, virtual drilling depth scale on display, machine status displays and warnings on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 volt, 50 Hz, power plug pre-installed, cable length 2m, three separate buttons for clockwise - counterclockwise - stop, Spindle hold with brake function, spindle guard with electrical interlock, lockable main switch, mushroom emergency stop button (latching), infinitely variable speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, coating: DD textured paint signal white RAL 9003, PANTONE 7545c, black Kodpfolub Rdox Ai Ienb Includes the following options: LED machine lamp, position 12. Delivery time: Ex stock Waiblingen Beinstein

Kondisi: perlu perbaikan (bekas), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 control X axis: 500 mm Y axis: 350 mm Z axis: 610 mm Kjdpfewmwrdox Ai Ienb Motor spindle: 18,000 rpm Power: 10.2 kW Tool changer: 24 positions Weight: 3,200 kg With 4th axis Tool holders: SK 30 Approximately 40 tool holders included The machine has the following issues: - The Heidenhain 430 control system is defective (booting is not always possible, system crashes occur during operation)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm Knedpfx Aisht Hg Dj Ijb COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: bekas, exzenterpresse-weingarten-ev63-en Knsdpfxek S Htxs Ai Isb

Tahun pembuatan: 2004, Kondisi: baik (bekas), A well-maintained used double-mitre cold circular saw from KASTO, Model: "KASTOdisc A10" - Fully automatic operation - Single cut mode Knodpfx Aekfvhkei Isb - Hydraulic clamping vices - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter: 350 mm Cutting capacity: Round 90°/45°: 100/100 mm Square 90°/45°: 100x100/100x100 mm Rectangular 90°/45°: 170x100/130x100 mm Shortest remnant length in single cut at 90°: 30 mm Shortest remnant length in automatic mode at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change and errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, X 450 Y 300 Z 300 mm, BT 30, 10.000 U/min, Spindelkühlung, Papierfilter, Mitsubishi Kjdpfx Aietiyl Es Isnb

Kondisi: bekas, Tahun pembuatan: 2004, Technical specifications: Table length: 920 mm Kjdpfx Asuzbayoi Ijnb Table width: 600 mm Current: 13.2 A Machine weight approx.: 6 t Required space approx.: 2,46 x 2,24 x 2,33 m X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 260 mm Maximum table load: 1,500 kg Dimensions for transport: Width 2,240 mm x height 2,330 mm x depth 2,460 mm, weight approx. 6,000 kg.

Kondisi: bekas, Various tool holders SK 30, DIN 69871 Kedpfsbp Nthsx Ai Ionb

Kondisi: siap digunakan (bekas), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel distance X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm–0.3mm, max. wire feed: 15m/min, U/V travel distance: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threading AT. Documentation available. On-site inspection possible. Kjdpfxovb Hbro Ai Ienb