Mesin kawat EDM

MAKINO EU 64

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Makino EU 64 wire EDM machine X = 600 mm Y = 400 mm Bsdpfx Aegwp Eqsbholc Z = 260 mm Maximum workpiece dimensions (W x D x H): 940 x 650 x 260 mm Maximum workpiece weight: 1500 kg Service required prior to commissioning!!! The current Makino service report can be provided upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, 1 Bljdpfsxmgcpex Abhec

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 1.500 kg, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 260 mm, tinggi total: 2.350 mm, panjang total: 2.500 mm, lebar total: 2.300 mm, tinggi benda kerja (maks.): 260 mm, lebar benda kerja (maks.): 650 mm, panjang benda kerja (maks.): 940 mm, berat keseluruhan: 6.000 kg, CNC wire cutting machine in very good condition. Fully inspected by Makino service technician. The machine has been cleaned, and all pumps have been checked, newly mounted, and sealed. Blodpfx Abowww Nqohsc

Kondisi: bekas, Tahun pembuatan: 2008, de-hu-it-lt-01 Bedpfxjvxww Ss Abhelc

Kondisi: baru, Tahun pembuatan: 2024, 600 kg load capacity Blsdpeg Tdpgsfx Abhjc Height-adjustable welding positioner with 100 mm through-hole Table diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm Bodpfx Abodyah Sehjlc - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Kondisi: siap digunakan (bekas), X/Y/Z/U/V travel: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Bedpfxsuqacko Abholc

Kondisi: bekas, Tahun pembuatan: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25,000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety switch Bljdscxxtmopfx Abhoc

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm Bsdpfx Abourw Uyjholc grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment

Kondisi: sangat baik (bekas), panjang pembubutan: 5.500 mm, Manufacturer: WEIPERT Model: W1400 Blodpfxjwzhzls Abhsc Control: R&D MTC3 Turning length: 5,500 mm Swing diameter over bed: 1,400 mm Swing diameter over cross slide: 960 mm Length: 9,000 mm Width: 2,900 mm Height: 2,900 mm Weight: 32,000 kg