Mesin cetak injeksi

KraussMaffei KM 160–750 CX

Kondisi: bekas, Tahun pembuatan: 2008, gaya penjepit: 160 kN, volume langkah: 251 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 8.200 kg, jam kerja: 37.200 h, diameter konveyor sekrup: 40 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Gjdpfewd Udlex Adtobg Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 25.215 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, jarak antara tiang: 520 mm, volume langkah: 318 cm³, gaya ejektor: 22.000 N, lintasan ejektor: 150 mm, panjang pelat: 845 mm, lebar pelat: 820 mm, tinggi pemasangan: 2.100 mm, panjang total: 5.100 mm, lebar total: 1.600 mm, tinggi total: 2.100 mm, berat keseluruhan: 6.600 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 400 V, bentang bebas: 950 mm, Perlengkapan: dokumentasi / manual, 503472 Gjdpfxex Icw Uo Adtjbg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mould opening stroke: 600 mm Mould height (installation): 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Gedpfx Adjx Avhyetsbg Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical-Hydraulic Equipment Rated pump motor power: 22 kW Installed heater capacity: 15.62 kW Number of cylinder heating zones: 5 Number of dry cycles (EUROMAP): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a touch colour display. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical data (standard version) Clamping unit Clamping force: 1600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Gjdpfx Adjxdd N Uetobg Ejector force forward/backward: 23 / 10 kN Injection unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection flow rate (standard): 177 cm³/s Screw rotation speed (standard): 265 rpm Electro-hydraulic system Pump motor power: 22 kW Installed heating power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + actuators + parts) Part deposition on operator-opposite side Axes: X axis (from mould): 620 mm, servomotor Y axis (vertical, with motor brake): 1200 mm, servomotor Z axis (transversal): 1500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m