KM 65-190 C1

Krauss-Maffei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, tekanan injeksi: 2.389 batang, lintasan ejektor: 135 mm, langkah pembukaan: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping platen dimensions (H x V): 1,520 x 1,470 mm Clearance between tie bars (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mould installation height: 675 mm Duedpfoycqc Tjx Abhsn Maximum daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/return: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Footprint approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump motor power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls at moving platen 2 x hydraulic core pulls at fixed platen Robot interface according to EUROMAP 67

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Dedpfx Abeyh I Emoheun

Kondisi: diremajakan ulang (bekas), Krauss Maffei injection moulding machine Clamping force: 25 tonnes Djdperdg Tpsfx Abheun Year: 2000 IPC not functioning (see circuit board)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN Dsdpfjyhby Hox Abhoun • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar Dsdpfx Aboyhbq Eohsun • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) • Hot runner control: 12 zones • Cooling: 4 x HB 100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 35 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection molding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection molding machine. Contact us for further details. • Locking device • Mold weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. mold diameter: 560 mm • Opening stroke: 1170 mm • Mold installation height: min 480 mm; max - • Maximum platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie bar spacing: H 900 mm / V 800 mm • Center ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump capacity / heating capacity: 90 kW / 44 kW • Miscellaneous • Max. crane load: 10 tons • 2K capability: no • Filter nozzle/mill: no • Operating hours: 60,159 h Additional equipment Djdpfxoyg Hz Ho Abhoun • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Kondisi: baik (bekas), Tahun pembuatan: 1997, Krauss-Maffei KM 110-520 C1, tahun 1997 Dusdpfsyh Rymsx Abhsn Ulir sekrup 45 mm Gaya penutupan 110 ton Jarak antar tie-bar 47x47 cm Berat injeksi 234 g

Kondisi: bekas, Krauss Maffei mainboard Dujdpfx Aeu Axihsbhsn

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 49.673 h, gaya penjepit: 800 kN, diameter sekrup: 35 mm, jarak antara tiang: 520 mm, volume langkah: 154 cm³, tekanan injeksi: 2,429 batang, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, panjang pelat: 740 mm, lebar pelat: 640 mm, tinggi pemasangan: 300 mm, panjang total: 5.350 mm, lebar total: 1.700 mm, tinggi total: 2.000 mm, berat keseluruhan: 6.500 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, bentang bebas: 790 mm, Perlengkapan: dokumentasi / manual, 503232 Dodpfoygv I Nox Abhoun

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we, as specialists in the trade of injection moulding machines, offer the following well-maintained, used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines with years from 2010 onwards. We have been wholesalers for used injection moulding machines for over 25 years. Current tax notice & benefit for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for a new machine. Reference: Growth Booster (§ 7 paragraph 2 EStG-E) Currently held in our Hanover warehouse – inspected and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP - thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately. - 2 x core pulls (moving clamping platen, fixed clamping platen) - Pneumatic valve 1 on fixed clamping platen - Accumulator for increased injection performance - Rapid screw decompression CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic encoding of injection unit - Pneumatic valve for blowing out on moving clamping platen - 12 temperature control zones - Volt-free contact BDE interface - Process monitoring - Cycle storage - Trend chart – target/actual graph - PV control - Active back pressure control - Single owner – origin Germany Continuous maintenance by manufacturer and previous owner Clamping Unit: Clamping force: 2,500 kN / 250 t Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight between platens: 1,150 mm Ejector stroke: 200 mm Ejector force: max 57 kN / return 26.3 kN Injection Unit: Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Dusdpfx Aoxqhuujbhsn Robot LRX S50: - 3 gripping circuits – 4 vacuum circuits Robot LRX 100: - 1 gripping circuit – 4 vacuum circuits Electrical: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, including manuals and software. Available immediately from our Hanover warehouse, Germany, or ex works / delivered at cost upon request. The machine is offered fully function-tested The machine is our sole property The requested machine is available immediately in our Hanover warehouse, offered fully function-tested, and can be inspected under power. Further information about our offered machines and our company: - We only sell machines purchased from ongoing production from our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party property - All machines come from successful companies for whom maintenance and servicing are a matter of course - All available machines can be inspected at our warehouse