Krauss Maffei 125-520 C1

KraussMaffei 125-520 C1

Kondisi: baik (bekas), Tahun pembuatan: 1997, jam operasional: 92.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, berat keseluruhan: 6.300 kg, Krauss Maffei KM125-520 C1 injection moulding machine for sale. Includes SEPRO robot. Equipped with shut-off nozzle and Stäubli quick-clamping system. Clamping unit: Clamping force: 1,250 kN Max. mould opening force: 70 kN Travel force, moving platen open: 35 kN Travel force, moving platen close: 28 kN Dksdpow Hyd Nsfx Aftji Mounting platen (H x V): 745 x 770 mm Clear space (H x V): 470 x 470 mm Mould opening stroke: 600 mm Minimum mould installation height: 300 mm Opening width: 900 mm Ejector stroke: 150 mm Ejector force, forward/back: 22/10 kN Injection unit: Screw diameter: 40 mm L/D ratio: 23 Injection pressure: 2377 bar Stroke volume: 217 cc Shot weight (PS): 198 g Injection flow rate: 126 cc/s Screw speed: 307 rpm Electrohydraulic equipment: Pump motor rated power: 18.5 kW Installed heating capacity: 13 kW Cylinder heater control zones: 5 Oil fill: 345 l Dimensions and weight: Installation space approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6,000 kg Max. mould weight: 1,485 kg If you have any further questions, please feel free to contact us at any time.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 53.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206432, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine for sale: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for more than 25 years. Current note – Tax advisory and benefit for used machinery As of 01/07/2025, used machinery is also eligible for a special depreciation allowance of 30% per annum for tax purposes. Dedsw Tt R Iepfx Afteki Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well-maintained – German origin Extras: - Complete high-wear resistant thermoplastic injection unit, 50 mm - Screw in HC (high corrosion) version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastics processing - Open nozzle, 50 mm - Extended nozzle tip, 50 mm - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping plate set, 570 mm, central ⌀ 125 mm - 2x air eject systems with pressure regulator - Air eject connection 1 - Selector unit connection - 1 core pull for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67 standard), 50-pin - Central computer interface ARBURG - Additional socket distributor: 1 CEE, 1 Schuko - Serial printer interface, USB - CompactFlash interface for data storage - Operator authorization via chip card according to EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Colour dosing unit interface - Manually adjustable cooling circuits - Machine-related cooling circuits regulated - Advanced monitoring equipment package - Advanced movement package - Production control equipment package - Optimization/operation support package - Quality assurance equipment package - Documentation equipment package Complete documentation included Injection unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Injection volume: 392 cm³ Clamping unit: - Clamping force: 200 tons / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platen: 795 x 795 mm - Minimum mould height: 300 mm - Maximum platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Drive capacity: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Loaded free onto buyer’s truck or delivered free to destination against freight charge Available from our Hannover/Germany warehouse Information regarding the machines we offer and our company: - We only sell our own stock, machines purchased from ongoing production, available from our Hanover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from reputable companies with consistent maintenance and care - All machines offered can be inspected at our warehouse

Kondisi: siap digunakan (bekas), Mesin bekas Mesin injeksi plastik Produsen: Krauss Maffei Tipe: KM 80 C1 Tahun pembuatan: 2000 Hanya tersisa 1 unit di stok Tanpa waktu pengiriman, siap kirim segera Kunjungan dapat dilakukan dengan janji terlebih dahulu Mesin tidak lagi terhubung ke listrik / Tanpa sambungan air pendingin Mesin disimpan secara profesional Data teknis: Gaya penutup: 800 kN Pelat pemasangan (mm): 610×610 Jarak antar tie-bar (mm): Tinggi pemasangan cetakan (mm): 250 Jarak pelat (mm): 750 Kontrol: MC4 Bahasa tampilan layar: Jerman (tidak dapat diubah) Diameter sekrup unit injeksi (mm): 45 Tekanan injeksi (bar): 1878 Volume langkah (cm³): 275 Dkedpfxou Ti Sre Aftji Daya penggerak pompa (kW): 18,5 Daya pemanas (kW): 13 Isi oli (l): 270 Dimensi (m): 4,3 x 1,4 x 2,1 Bobot total: 3,2 ton Foto tambahan atas permintaan.

Tahun pembuatan: 2004, Kondisi: baik (bekas),

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 60.000 h, Injection molding machine Krauss Maffei 50-180 CX Dedpfxev Tmzpe Aftski Year 2006 Screw diameter 30 mm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard Dedpeud H Dmofx Aftjki - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: diremajakan ulang (bekas), Krauss Maffei injection moulding machine Dedpfxordg Tps Afteki Clamping force: 25 tonnes Year: 2000 IPC not functioning (see circuit board)

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Clamping force: 1,100 kN, screw diameter: 35 mm, shot weight: 140 g, injection volume: 154 cm³, injection pressure: 2,429 bar, max. cylinder temperature: 375°C, weight: approx. 8,000 kg, control system: MC 5 3.0, operating hours: 25,271 h, pump hours: 29,098 h. Includes one linear robot KM LRX 150, travel range X/Y/Z: 900 mm / 1,200 mm / 3,000 mm, payload: 15 kg. Documentation available. Inspection on site is possible. Dkodewz N Tvspfx Aftei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Machine Ref. No.: 13610 Manufacturer: Krauss Maffei Machine Type: KM 110 – 390 C2 Year of Manufacture: 1998 Operating Hours: h Control System: MC3-F Display Language: German Location: D-52249 Eschweiler Clamping Unit: Clamping Force: 1,100 kN Maximum Mold Opening Force: 70 kN Movable Platen Opening Force: 35 kN Movable Platen Closing Force: 28 kN Mounting Plate (H x V): 745 x 770 mm Clear Width (H x V): 470 x 470 mm Mold Opening Stroke: 600 mm Minimum Mold Installation Height: 300 mm Daylight Opening: 900 mm Ejector Stroke: 150 mm Ejector Force, Forward/Return: 22/10 kN Injection Unit: Screw Diameter: 35 mm Dsdpsub S Uljfx Afteki L/D Ratio: 23 Injection Pressure: 2,429 bar Shot Volume: 156 cm³ Shot Weight (PS): 142 g Injection Flow Rate: 123 cm³/s Screw Speed: 391 rpm Plasticizing Rate: 22 g/s Nozzle Contact Force: 84 kN Electrohydraulic Equipment: Rated Pump Motor Power: 18.5 kW Installed Heating Capacity: 12 kW Number of Cylinder Heating Zones: 5 Oil Capacity: 345 liters Dimensions and Weights: Space Requirement approx.: 5.00 x 1.60 x 2.20 m Overall Weight: 6,000 kg Max. Mold Weight: 1,485 kg Accessories: - Vibration isolators - 6-way water manifold Additional Equipment: - 2 x air valves - 2 x core pulls - Robot interface according to Euromap 12 - Accumulator - Electromotive screw drive