Krauss Maffei 420-3000 CX

KraussMaffei 420-3000 CX

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. Godpsyhby Hefx Ag Rotw • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Injection weight (PS): 1464 g Injection flow rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Dosing unit colourant control Gsdpjydbbvsfx Ag Rotw 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4 kN, diameter sekrup: 70 mm, Offer Details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control type: CC200 Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 4,000 kN Platen size (H x V): 1,400 x 1,080 mm Min. mold installation height: 350 mm Opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electrohydraulic Equipment: Pump motor rated power: 45 kW Dimensions and Weights: Space requirement (approx.): 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: Gtedpou Awalofx Ag Rsw - Vibration dampers - 2 x 24-fold water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 60.000 h, Injection molding machine Krauss Maffei 50-180 CX Year 2006 Gtsdpev Tmzpjfx Ag Rsw Screw diameter 30 mm

Kondisi: baik (bekas), Tahun pembuatan: 2006, Perangkat Motan Dossier Gedsucg Dkspfx Ag Rjtw Tahun pembuatan sekitar 2006 Tanpa layar

Kondisi: bekas, Tahun pembuatan: 2024, Kraus Maffei mesin injeksi plastik tahun 2024 dalam kondisi sangat baik. Dalam kondisi sempurna, hanya dengan 588 jam operasi. Dilengkapi dengan: 1x katup pneumatik pada MOP, 1x unit penggerak hidrolik 20 liter, 2x penarik inti hidraulik, 1x manifold air 4-jalur. Gtjdox Ald Rjpfx Ag Rsw Tersedia segera dan dapat dilihat beroperasi berdasarkan perjanjian. Info lebih lanjut atas permintaan. Unit injeksi: 1400 Sekrup: 60 mm / 23.00 dengan pelindung aus / 25.50 Lebar bukaan maks.: 1150 mm Ejektor: Ejektor pelat EM hidrolik/elektrik Penarik inti: 2 hidrolik Katup udara: 1 MMP Sistem kontrol: MC P1 Catu daya: 400 / 230 V 50Hz 3-fase dengan netral Gaya penjepit: 2500 kN Kapasitas injeksi: 679 cm³

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 73.437 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, tinggi total: 2.095 mm, berat keseluruhan: 8.700 kg, panjang produk (maks.): 5.155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various tool sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. The machine is equipped with a robot, ensuring efficient automation. If you are searching for a high-quality injection moulding machine, consider the Engel VICTORY 650/160 tech we offer for sale. Please contact us for more information regarding this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie bar spacing: Tie-bar-less design • Motor power: 22 kW • Heating capacity: 13.35 kW • Number of electric connections: 16 • Nozzle tip radius: R35 Gtsdox Nr Huepfx Ag Row • Centring ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional features • Equipped with robot: Yes • Robot interface: Euromap 67

Kondisi: baik (bekas), Tahun pembuatan: 2015, gaya penjepit: 2.200 kN, Perlengkapan: dokumentasi / manual, 1 Gtsdpfx Agjx H Awle Row

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 20.500 h, Fungsionalitas: berfungsi sepenuhnya, de2hu_moldmachine_kraussmaffei Gedsyat S Sspfx Ag Rotw