Mesin cetak injeksi

KraussMaffei Blue Power CX 80-380

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, berat keseluruhan: 8.400 kg, Hydraulic injection moulding machine from 2023. This HAITIAN MA 2500 III offers a clamping force of 250 tonnes and a platen size of 850 x 850 mm. The machine features an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking for a high-quality injection moulding machine, the HAITIAN MA 2500 III we are offering for sale is well worth considering. Contact us for further details on this machine. • Clamping Unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max. mould height: 580 mm • Min. mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min. mould dimensions: 410 x 410 mm • Injection Unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticising capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 l • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control System • Controller: KEBA 2985 - CP053 • Features: • 15" colour touchscreen • Euromap 67 robot interface Codpfx Aqjy N Sqmjxjgw • USB storage • 200-tool memory • Cycle history • Alarm tower • RFID login/password • Multilingual interface • Process graphs • Maintenance pages • Metric/imperial selectable • Included Options/Extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial exhaust • Festo air-blast system • 12-zone central lubrication (PSG) • 4-way flowmeter • Robot interface • Includes 3-zone screw • CE-certified safety cell Additional Equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travel paths: X 2000 mm / Y 880 mm / Z 1300 mm • Max. extractable weight: 12 kg • Power supply: 400 VAC / 50-60 Hz • Accuracy: 0.1 mm • Robot weight: 530 kg • Included: touchscreen controller, USB programs, pneumatic gripper, vacuum suction cup, conveyor belt ready • Included peripherals: FORMAX E3 Monofase hopper loader (2 units) • Hopper capacity: 3.0 l • Power: 1150 W • Inlet diameter: 40 mm • Throughput: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019,

Kondisi: baik (bekas), Tahun pembuatan: 2015, Used thermocontainer; however, in exceptionally good condition, ready for immediate use. Model designation: C-780ü (Various thermocontainers in stock, ranging from 580 liters to 1170 liters capacity, see further photos) Technical Data: Inside dimensions: 610 x 810 x 1570 mm Outside dimensions: 735 x 955 x 1900 mm Weight: approx. 98 kg Cgjdped Syg Sofx Aqxjw Capacity: approx. 780 liters With slide-in rails for grids Features: - Central door locking mechanism - 2 side pull handles - 1 folding handle recessed in door - Undercarriage with 108 mm castors, PA, suitable for cold storage use - Door retainer - Internal tub with slide-in rails - Angle supports with edging - PE panels (2 mm thick), light blue - Profiled bump protection plates (3-sided) - 2 fixed castors, 2 swivel castors - Lockable with padlock - Load capacity up to approx. 400 kg - REFURBISHED Fine cleaning is to be carried out by the buyer. Offer consists of one container. Color depending on stock availability. Approx. 100 units in stock. We offer the opportunity to view the units by prior telephone appointment on Tuesdays and Thursdays between 9 a.m. and 4 p.m. If required, the item can be collected immediately. Unless otherwise specified, this is used equipment. The items have been visually inspected and are otherwise technically in order. Shelves and cooling plates are not included in the offer, but are also available from us. For time management reasons, we can only respond to inquiries regarding this item if you provide a phone number. Price stated is net per unit plus currently applicable VAT. All offers ex-stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Images are similar, as not every individual item is shown)

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 60.000 h, Injection molding machine Krauss Maffei 50-180 CX Year 2006 Cgjdpfx Ajv Tmzpoqxsw Screw diameter 30 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Slow-speed Granulator Wanner C13.20 SV Year of manufacture: 2007 Power: 2.2 kW Description: Csdpfx Asw D R Hpsqxegw Rotor knives: 9 Stator knives: 2 Rotor diameter: 130 mm Rotor width: 200 mm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry. Csdouggb Dopfx Aqxsgw

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept Cgodpoud H Dmsfx Aqxew – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ref.-No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar distance (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight: 750 mm Injection Unit Screw diameter: 35 mm Shot volume: 154 cm³ Shot weight PS: 141 g Injection pressure: 2500 bar Cjdexvy Rljpfx Aqxsgw Dimensions and Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-Series, featuring optimized hydraulic performance, stable process management, and outstanding reliability. This machine offers a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as applications with high quality requirements. Typical benefits of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good spare parts availability * Suitable for continuous industrial operation The Golden Edition further distinguishes itself with optimized performance and excellent value for money on the used machinery market. Thanks to its versatility, this machine is frequently used in sectors such as automotive supply, technical plastic parts, and series production.

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), angebot-2-spritzgiessmaschinen-2008-2009 Cjdpfx Asx I Rqcjqxsgw

Tahun pembuatan: 2004, Kondisi: baik (bekas),