Mesin cetak injeksi

KraussMaffei KM 1300-12000 MC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 used injection moulding machine Manufacturer: ENGEL Kedpfx Aju Eu Tneglewt Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tonnes Tie bar spacing: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), VAN DAM 568 COM III 8-COLOUR CUP PRINTER 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Machine type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition Ksdeh Ha I Ejpfx Aglewt If you have any questions about the machine or its specifications, please feel free to contact us at any time.

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TET351P5-offAD-Bypass - 2200373733, kapasitas pendinginan: 66 kW (89,73 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.082 kg, suhu lingkungan (maks.): 46 °C, suhu lingkungan (min.): -5 °C, tegangan masuk: 400 V, tekanan: 6 batang, suhu: 7 °C, laju aliran volumetrik: 11,2 m³/jam, tekanan pompa: 4,68 batang, lebar total: 866 mm, panjang total: 2.250 mm, tinggi total: 2.054 mm, masa garansi: 3 bulan, frekuensi input: 50 Hz, Perlengkapan: Pelat tipe tersedia, Air-cooled process chiller / chiller unit Model: TAEevo Tech 351 P5-offAD-Bypass Manufacturer: MTA S.p.A. Chiller, cold water unit; cooler The TAEevo Tech 351 P5-offAD-Bypass is a compact, air-cooled water chiller suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special equipment: - Open filling system / tank mounted - Manual valve bypass between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Kedpfx Aewlt Raoglewt Serial no.: 2200373733 Year of construction: 2021 Condition: Visual 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have cosmetic defects due to usage. (Technical modifications and prior sale reserved!)

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei Injection Moulding Machine KM 800 – 12000 MX Year of manufacture: 2006 Clamping unit: - Clamping force: 8,000 kN - Mould opening force: 560 kN - Platen dimensions (h x v): 1,600 x 1,530 mm - Tie bar clearance (h x v): 1,120 x 1,000 mm - Mould opening stroke: 1,600 mm - Mould height (min - max): 500–1,100 mm - Platen opening distance: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit: - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight (PS): 6,098 g - Screw speed, standard/option: 121/153 rpm - Injection rate (standard) Electrical and hydraulic equipment: - Rated pump drive power: 110 kW - Installed heater power: 57 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap: 965 cycles/h - Oil tank capacity: 1,500 l Kwodjtmq Akspfx Agljt Dimensions and weight: - Net weight incl. control cabinet: 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Kedpfx Agjv I Eq Sjlswt Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 191523, gaya penjepit: 490 kN, diameter sekrup: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Technical data: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine no.: 191523 Screw diameter: 30 mm Tie bar distance: Tie-barless Kwjdpfxsv Tb U Ds Aglst Locating ring diameter: 125 mm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036940, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: Kjdpfx Aougfw Dsgljwt The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector. Your advantages: – Optimised price-performance ratio for a wide range of applications – High energy efficiency due to the all-electric machine concept – Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, YOM 2013) CONTROL SYSTEM ■ MC P1 with 15” TFT colour display, multitouch functionality CLAMPING UNIT ■ Clamping force: kN 1600 ■ Max. mould opening force: kN 120 ■ Clear space (H x V): mm 570 x 520 ■ Mounting platen size (H x V): mm 770 x 720 ■ Mould installation height min. - max.: mm 200 - 500 ■ Max. opening width: mm 950 ■ Max. mould opening stroke: mm 450 ■ Ejector drive: electric ■ Ejector stroke: mm 100 ■ Ejector force fwd/back: kN 33 / 33 ■ Ejector speed fwd/back: mm/s 300 / 300 ■ Max. mould weight: kg 1200 INJECTION UNIT ■ Screw diameter / type: mm 50 / standard ■ Effective L/D ratio: 20.2 ■ Injection pressure: bar 1892 ■ Shot volume: cm³ 393 ■ Shot weight at max. stroke for PS: g 358 ■ Injection speed: mm/s 200 ■ Injection flow rate: cm³/s 393 ■ Screw drive/speed: rpm 267 ■ Plasticising capacity (standard screw): g/s 36.5 ■ Nozzle contact force: kN 42 ELECTRICAL SPECIFICATIONS ■ Connected load: kW 31.2 ■ Installed heating capacity: kW 15.5 ■ Power supply: V / Hz 400 / 50, 3 phases with neutral DIMENSIONS & WEIGHT ■ Net weight incl. electrical cabinet: t 9.7 ■ Length x width x height: m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT ■ Wear-resistant plasticising unit ■ BluePower full insulation of plasticising cylinder ■ Open nozzle ■ Air valve 1-fold (BWAP) ■ Pneumatic hot runner shut-off control 1-fold ■ Electrical interface for pneumatic cascade 4-fold ■ Euromap handling interfaces E18 + E67 ■ Euromap interface (central computer) E67, E77 ■ Water manifold 4-fold ■ Electrical pre-wiring for hydraulic auxiliary unit ■ Automatic central lubrication ■ Adaptive Process Control (APC) ■ Injection compression moulding circuitry ■ Graphic analysis package ■ Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm Kjdpfxetrya Rs Aglewt - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Max. throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame stand, level valve, inspection shaft, and documentation. Kwodpjh Akm Tsfx Aglst