Mesin cetak injeksi

KraussMaffei KM 160-1000 PX

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a touch colour display. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical data (standard version) Clamping unit Clamping force: 1600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/backward: 23 / 10 kN Injection unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection flow rate (standard): 177 cm³/s Screw rotation speed (standard): 265 rpm Electro-hydraulic system Pump motor power: 22 kW Installed heating power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + actuators + parts) Part deposition on operator-opposite side Hsdpfexdd N Uex Abyon Axes: X axis (from mould): 620 mm, servomotor Y axis (vertical, with motor brake): 1200 mm, servomotor Z axis (transversal): 1500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 17.481 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 50 mm, jarak antara tiang: 520 mm, volume langkah: 393 cm³, tekanan injeksi: 1.892 batang, berat injeksi: 375 g, tinggi cetakan (min.): 300 mm, gaya ejektor: 33 N, lintasan ejektor: 150 mm, panjang total: 5.000 mm, lebar total: 1.600 mm, tinggi total: 2.000 mm, berat keseluruhan: 8.200 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), daya pompa: 2.200 W, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Mesin dirawat secara rutin, uji coba memungkinkan. Hjdpfx Aboxvqnnoyon

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Fast and reliable delivery due to the base machine concept featuring a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, Year 2013) CONTROL - MC P1 with 15'' TFT colour display featuring multi-touch functionality CLAMPING UNIT - Clamping force: kN 1200 - Maximum mould opening force: kN 180 - Clear space (h x v): mm 520 x 470 - Mounting platen dimensions (h x v): mm 690 x 640 - Minimum–maximum mould height: mm 180–450 - Maximum opening stroke: mm 850 - Maximum mould opening travel: mm 450 - Ejector drive: electric - Ejector stroke: mm 120 - Ejector force fwd/rev: kN 27 / 33 - Ejector speed fwd/rev: mm/s 300 / 300 - Maximum mould weight: kg 850 INJECTION UNIT - Screw diameter / type: mm 35 / standard - Effective L/D ratio: 22.9 - Injection pressure: bar 2429 - Shot volume: cm³ 154 - Shot weight at max. stroke for PS: g 140 - Injection speed: mm/s 200 - Injection rate: cm³/s 192 - Screw speed: rpm 374 - Plasticising rate (standard screw): g/s 18.9 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 22.7 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight including control cabinet: t 6.7 - Length x width x height: m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve: single (BWAP) - Pneumatic control for hot runner shut-off: single - Electrical interface for pneumatic cascade: 4-fold - Euromap interfaces for automation: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold: 4-fold - Electrical prewiring for external hydraulic unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding function Hjdpfsy Rmwdjx Abyon - Graphic analysis package - Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force 1600 kN Max. tool opening force 87 kN Moving platen opening force 45 kN Moving platen closing force 38 kN Clamping platen (H x V) 820 x 845 mm Clear distance between tie bars (H x V) 520 x 520 mm Mold opening stroke 650 mm Min. mold installation height 300 mm Maximum opening stroke 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection Unit: Screw diameter 50 mm L/D ratio 20 Injection pressure 1892 bar Shot volume 393 ccm Shot weight (PS) 358 g Injection flow rate 177 ccm/s Screw speed 265 rpm Plasticizing rate 36.2 g/s Nozzle contact force 50 kN Electrohydraulic Equipment: Rated power of pump motor 22 kW Installed heating capacity 16 kW Number of heating zones (barrel) 5 Oil capacity 489 liters Dimensions and Weights: Floor space approx. 5.50 x 2.00 x 2.20 m Total weight 8200 kg Hodpfx Ajy Nlb Sjbyjn Max. mold weight 1862 kg Accessories: - Vibration-damping elements - BluePower servo pump drive Additional Equipment: - 1 x air valve - 8 x hot runner controllers - 2 x core pulls on moving platen - 2 x core pulls on fixed platen - Robot interface to Euromap 67