Mesin cetak injeksi

KraussMaffei KM 250-1000 CX

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4 kN, diameter sekrup: 70 mm, Offer Details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control type: CC200 Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 4,000 kN Platen size (H x V): 1,400 x 1,080 mm Min. mold installation height: 350 mm Opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Bodpfxju Awale Abvowu Electrohydraulic Equipment: Pump motor rated power: 45 kW Dimensions and Weights: Space requirement (approx.): 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Vibration dampers - 2 x 24-fold water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Kondisi: bekas, Etek stretch blow moulding machine ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles made from PET preform blanks Stretch blow moulding machine for rotary table production process Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Mains connection: 400 Volt, 50 Hz Bedpfskucxljx Abvewu Net weight approx. 6,000 kg As-new condition

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ref.-No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar distance (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight: 750 mm Injection Unit Screw diameter: 35 mm Shot volume: 154 cm³ Shot weight PS: 141 g Injection pressure: 2500 bar Dimensions and Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional information: Communication card for ProSeS interface available (OPC-UA) Bodpsxvy Rlsfx Abvswu Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-Series, featuring optimized hydraulic performance, stable process management, and outstanding reliability. This machine offers a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as applications with high quality requirements. Typical benefits of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good spare parts availability * Suitable for continuous industrial operation The Golden Edition further distinguishes itself with optimized performance and excellent value for money on the used machinery market. Thanks to its versatility, this machine is frequently used in sectors such as automotive supply, technical plastic parts, and series production.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 23.905 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 600 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 2.221 batang, langkah pembukaan: 335 mm, panjang total: 2.420 mm, lebar total: 1.700 mm, tinggi total: 3.100 mm, berat keseluruhan: 6.700 kg, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding ENGEL INSERT 200V/60 yang terawat dengan hanya 23.905 jam operasi. Mesin ini hanya digunakan untuk pengujian sampel. Bsdpfey Iwlaex Abvewu Inspeksi dengan arus listrik dapat dilakukan kapan saja! Data teknis sesuai gambar! Mesin tersedia segera!

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, For sale is an injection molding machine from Netstal, model Synergy 1000-230. Following a transport accident, the control cabinet is completely damaged, so the machine is offered as a source of spare parts or for repair. The machine would otherwise be fully operational and is in good condition. Technical data: Operating pressure: 210 bar, Injection force: 182 kN, Clamping force: 1,000 kN, Opening stroke: 0-400 mm, Mold height: 450-750 mm, Total weight: 7,200 kg, Operating hours: approx. 53,000 Available from March 2024. Initial fillings with hydraulic oil can be ordered from us. Bjdpfx Abjrfbnmsvswu Upon request and for an additional charge, we can arrange loading and transport across Europe. All prices are plus VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT Bwodpfxeud H Dms Abvsu - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, jam operasional: 33.107 h, Fungsionalitas: berfungsi sepenuhnya, Top machine from cleanroom production (pharmaceutical sector) - With rotary table 820 mm - With GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - Only 33,107 operating hours - Safety housing/safety cage - Horizontal conveyor belt - Minimal paint damage / nearly as-new appearance - Fully operational The machine can be inspected under power by arrangement. Technical data Manufacturer: Engel Model: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: Fully operational Condition: Excellent Special features Control: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72/35 g Injection pressure: 2391/2066 bar Injection volume: 79 / 38 ccm Clamping force: 1300 kN / 130 t Tie bar distance: Tie-barless Ejector stroke / force: 61 kN / 100 mm Clamping unit: Hydraulic Motor output: to follow Heating capacity: to follow Total connected load: to follow The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras 2-component/2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety housing / safety cage CC 200 control German/English language GEKU Robot Details Bedeub Umqepfx Abvswu SR 500 ST Control: Simotion X-axis: 600 mm Y-axis (vertical): 1400 mm Z-axis (horizontal): 2500 mm A-rotary axis: SWM 45 C-axis: Servo Gripper: SWS16 B-axis: Not present Warranty Warranty until first commissioning Loading/Shipping Free loaded onto buyer's truck or free delivery within Germany upon reimbursement of freight costs From our warehouse in Hanover/Germany Financing – on request – lease-purchase option Price on request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 250 kg, kapasitas angkut: 25 kg, produsen pengendali: Yaskawa, model controller: YRC1000, produsen teach pendant: Yaskawa, Perlengkapan: dokumentasi / manual, Robot industri YASKAWA GP 25 Kontrol YRC 1000 Robot ini hanya digunakan sebagai robot demonstrasi. Hanya sekitar 600 jam operasional. Siap untuk diambil. Bwjdpfx Aexb T Syobvou

Kondisi: baru, Tahun pembuatan: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tonnes Sheet thickness 42 kgf / mm: 8 mm Sheet thickness 72 kgf / mm: 4 mm Upper tool: 1260 Top Tool 85° Lower tool: 50, 35, 22, 16 Frame gap (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (optionally CNC motorised at extra cost) X-axis stroke: 750 mm X-axis speed: 250 mm/s Backgauge fingers: 2 pcs Front support arms: 2 pcs Oil tank capacity: 180 litres Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Frame depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), expandable with optional R+Z axes Eurostamp 2067 lower tool (V:50, 35, 22, 16) Eurostamp 1260 upper tool 85° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorised backgauge (X:750 mm) Adjustable backgauge fingers Selectable inch and metric system Ground and chromed cylinders Swivelling control panel Foot pedal with anti-panic stop & emergency stop Side safety fences (secured with limit switches) Light curtain at rear of machine (900 mm) DSP laser finger protection system at front (CE) BOSCH/REXROTH or HOERBIGER/HAWE hydraulic system, BOSCH/REXROTH or ECKERLE hydraulic pump Moveable front support arms (2 pcs) Electrical unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Finish: RAL 7035, RAL 5015 Optional special equipment (available at extra cost): - CNC-controlled R-axis (250 mm) - CNC-motorised crowning Bedpfogu N Alox Abvswu - Servo drive motors for backgauge system for X+R axes (Mitsubishi) - Custom colour finish on request Documentation in German or English CE conformity

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Bwodey Hmfyjpfx Abvju Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.