Mesin cetak injeksi
KraussMaffei KM 300-1400 CX

Name: KraussMaffei KM 300-1400 CX
Brand: KraussMaffei
Availability: InStock

Tahun pembuatan

2025

Kondisi

Baru

Lokasi

Wrocław

Mesin cetak injeksi KraussMaffei KM 300-1400 CX

Tampilkan peta

Data mesin

Nama mesin:: Mesin cetak injeksi

Pabrikan:: KraussMaffei

Model:: KM 300-1400 CX

Tahun pembuatan:: 2025

Kondisi:: baru

Harga & Lokasi

Lokasi:: Kwiatkowskiego 5a, 52-407 Wrocław, Polska

Hubungi

Rincian penawaran

ID iklan:: A20025260

Pembaruan:: terakhir pada 18.09.2025

Deskripsi

Injection Moulding Machine – Krauss Maffei KM 300-1400 CX
Year of manufacture: 2025

Fully hydraulic clamping unit. MC 6 control system based on an industrial computer operating in real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a colour touch screen.

Plasticising Unit

Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle

Nozzle radius: 15 mm
Nozzle opening: 6 mm

Technical specifications (standard version)

Lasdpexdd Spsfx Aahok
Clamping unit

Clamping force: 3000 kN
Opening force: 169 kN
Platen dimensions (H x V): 995 x 1050 mm
Tie bar spacing (H x V): 630 x 630 mm
Opening stroke: 820 mm
Minimum mould height: 330 mm
Maximum daylight: 1150 mm
Ejector stroke: 200 mm
Ejector force (forward/back): 58 / 28 kN

Injection unit

Screw diameter: 60 mm
L/D ratio: 20.8
Injection pressure: 2006 bar
Injection volume: 679 cm³
Shot weight (PS): 618 g
Injection speed: 110 mm/s
Injection rate (standard): 311 cm³/s
Screw speed (standard): 260 rpm

Electro-hydraulic system

Pump motor power: 45 kW
Installed heater capacity: 22.4 kW
Dry cycle time according to Euromap 6: 2.7 s
Oil tank capacity: 720 l

Linear robot – Krauss-Maffei LRX 150

Payload < 15 kg (gripper + drives + parts)
Part deposit on operator-opposite side

Axes:
X axis (from mould): 900 mm, servomotor
Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic
Z axis (transverse): —

Dimensions and weight

Net weight (with control cabinet): 13.2 t
Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2019

105 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+48 71 70... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Langenfeld (Rheinland)

11.262 km

Mesin cetak injeksi
KraussMaffeiKM 300-1400 CX

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, jarak antara tiang: 630 mm, volume langkah: 678 cm³, tekanan injeksi: 2,007 batang, gaya ejektor: 58.000 N, lintasan ejektor: 200 mm, panjang pelat: 1.050 mm, lebar pelat: 995 mm, tinggi pemasangan: 330 mm, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 400 V, bentang bebas: 1.150 mm, Perlengkapan: dokumentasi / manual, 503393 Lodjx Eyuxjpfx Aahsak

Lihat detail

Iklan kecil

Mesin Penggilingan - Ponsel montante FPT Industrie TESSEN EVO35

Matelica (MC)

10.962 km

Mesin Penggilingan - Ponsel montante
FPT IndustrieTESSEN EVO35

Hubungi

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS CNC KOLOM BERJALAN DENGAN KEPALA OTOMATIS SUMBU A/B JARAK GERAK LONGITUDINAL: 3500 mm JARAK GERAK TRANSVERSAL: 1100 mm JARAK GERAK VERTIKAL: 1500 mm LAJU RAPID L-T-V: 40 m/menit Lodpfx Aaswla Hzshoak UKURAN MEJA: 3800 x 1000 mm KEPALA: OTOMATIS SUMBU A/B; POSISI MILLESIMAL; ISO 50; 5000 rpm; 34 kW MAJALAH ALAT: TIPE RANTAI; 40 POSISI UNIT KONTROL: HEIDENHAIN TNC 640 COOLANT TEKANAN TINGGI: 40 Bar BERAT: 35.020 kg DIMENSI KESELURUHAN: 8760 x 4950 x 3780 mm AKSESORIS: - Konveyor serbuk - Laser tool setter - Touch probe - Portable handwheel

Lihat detail

Iklan kecil

Dornhan

11.218 km

Mesin mati tenggelam
ExeronEDM314MF30

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, jam operasional: 985 h, jarak pergerakan sumbu X: 905 mm, jarak lintasan sumbu Y: 705 mm, jarak gerak sumbu Z: 455 mm, berat benda kerja (maks.): 3.000 kg, EDM314MF30 - SLM (Second-Life Machine) Completely Overhauled Travel Range X x Y x Z: 900 x 705 x 455 mm Machine Table: 1150 x 850 mm Tank Size: 1200 x 900 mm Distance Table/Chuck: 260/710 mm Electrode Weight: 50 / 500 kg Max. Workpiece Weight: 3000 kg Overall Machine Dimensions: 2210 x 3450 x 3250 mm Power Supply: 400V/3-phase/50/60Hz Tank Height: 750 mm Equipment: MF30 Operating Interface Movable Operating Panel Touch Screen Display Lifting Speed: 15,000 mm/min (Highjump) EDM Generator: 60A Integrated Chiller Unit Cartridge Filter System 8-Position Tool Changer Lodpjhfaizjfx Aahsak C-Axis with Direct Measurement, Resolution 0.0001 Degree C-Axis for Positioning, Rotation, and EDM Operation C-Axis: 100 RPM Automatic Tank Tracking Filling, Filtering and Flushing Pump Transport Commissioning Training 12 Months Warranty

Lihat detail

Iklan kecil

BINGKAI HIDROLIK PRESS INO PRESS 100K-500

Berlin

10.804 km

BINGKAI HIDROLIK PRESS
INO PRESS100K-500

Hubungi

Iklan kecil

Iszkaszentgyörgy

10.508 km

Pusat permesinan vertikal
TOYODAFV1165

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, FANUC Series 18i-MB control Table size: 1300 x 650 mm Table load: 1500 kg X travel: 1100 mm Y travel: 650 mm Z travel: 600 mm Spindle speed: 12,000 rpm Spindle taper: MAS BT40 Magazine: 32 stations Drive power: Weight: 7,200 kg Dimensions (LxWxH): 3100 x 2300 x 3100 mm Equipment and Accessories: - Chip conveyor Lodsuu Rzropfx Aahsak - Coolant system - Spindle cooler - Through-spindle coolant (IKZ) - Documentation Very good condition. Machine is being sold due to closure of production.

Lihat detail

Iklan kecil

Penguji kekerasan Rockwell 3-Rath Kalibrier+Prüftechnik GmbH & Co. 3R-150M

Haiger

11.189 km

Penguji kekerasan Rockwell
3-Rath Kalibrier+Prüftechnik GmbH & Co.3R-150M

Hubungi

Tahun pembuatan: 2023, Kondisi: baru, - modern ergonomic design - manual testing process with analog dial gauge (reading accuracy 0.2 HR units) - simple operation and fast testing procedure Lsdpfxjpbbc Hs Aahjak - test space height approx. 185 mm - test space depth approx. 160 mm - dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - Prism support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16'' ball holder with ball - 120° Rockwell diamond indenter - Spindle protection - Accessory case

Lihat detail

Iklan kecil

Mesin bor lubang dalam Samag TFZ 2L - 1000

Babberich

11.297 km

Mesin bor lubang dalam
SamagTFZ 2L - 1000

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, kedalaman pengeboran: 1.250 mm, panjang total: 8.100 mm, lebar total: 6.300 mm, tinggi total: 4.300 mm, berat benda kerja (maks.): 7.000 kg, berat keseluruhan: 31.000 kg, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan spindel (maks.): 6.000 rpm, diameter bor: 36 mm, 4-Seiten-Komplettbearbeitung Schwenkbare Bohr- und Fräseinheit DCM Dynamische Kollisionsüberwachung CAM-Modell QCK (Quick Check Kinematics) Transferbohrzyklus (380-382) 90 Bar IKZ-Kühlsystem Zusätzlicher ATC-Turm 24-fach (4 x 6) HSK 63 Doppel-Spindel-Mutter-Konstruktion Sauberwassertank 1.650 L und Abwassertank 1.300 L Späneförderer Ledpfx Aaevn Sv Ujheak Max. Bohrdurchmesser Stahl: 36 mm Bohrtiefe: 1.250 mm X-Achse Verfahrweg: 1.600 mm Y-Achse Verfahrweg: 1.250 mm Z-Achse Verfahrweg: 1.100 mm W-Achse Verfahrweg: 1.600 mm Tischbelastung: 7.000 kg Tischgröße L x B / oder Ø: 1.500 x 1.100 mm Spindelaufnahme: HSK-63Mk Spindelleistung: 23 kW Drehzahlen / Bereiche: 6.000 U/min Länge: 8.100 mm Breite: 6.300 mm Höhe: 4.300 mm Gewicht: 31.000 kg

Lihat detail

Iklan kecil

Alat presetter PWB Tool Master 250 TCAM3

Jerman

12.681 km

Alat presetter
PWBTool Master 250 TCAM3

Hubungi

Kondisi: bekas, Tahun pembuatan: 2010, Technical details: Measuring range X-axis: 280 mm Measuring range Y-axis: 300 mm Tool holder: SK 40 Tool holder: rotatable 360° Compressed air: required bar Power supply: 220 V Weight: approx. 70 kg Dimensions (L-W-H): 900 x 475 x 820 mm Application of rotating tools Measuring method: optical / point and line measurement (line, angle, radius, perpendicular, with center and concentricity) Measuring beam manually adjustable via handwheel, X-axis = 140 mm and Z-axis = 300 mm, transmitted-light LED illumination Color camera type HS-CAM 6, working distance 100 mm, reach 55 mm Image processing system type TCAM3, fixed/floating crosshair, via 12.1" screen, memory for 1000 tools Table top Ø 90 mm, maximum reach 225 mm, manually rotatable 360°, Tool holder SK50:SK40 (see photo) Accessories: Power supply 12 V adapter 4x USB interfaces Lodpeva Atnefx Aahsak (Label printer with power supply not connected) Tool holder SK50:HSK A63

Lihat detail

Iklan kecil

Mesin penggilingan gigi Schütz Tizian Cut 5 Dental

Salzweg

10.852 km

Mesin penggilingan gigi
SchützTizian Cut 5 Dental

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 538518/1, Dear Interested Party, All data regarding the equipment can be found in the photos and PDF documents. The equipment can be inspected at our premises by appointment. Lsdpfxjumv Alo Aahjak If you have any further questions, please do not hesitate to contact us.

Lihat detail

Iklan kecil

Mesin bor lubang dalam CNC Auerbach IA3 TLF-U

Heilbronn

11.154 km

Mesin bor lubang dalam CNC
AuerbachIA3 TLF-U

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Lsdjwcldaopfx Aahsak Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.

Lihat detail

Beriklan di sini