Mesin cetak injeksi

KraussMaffei KM 500/3500 C1

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 504212, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, jarak antara tiang: 900 mm, tekanan injeksi: 1.742 batang, tinggi pemasangan: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (retraction): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Hjdpfxjw Dy Rwo Aazopa Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total nominal current (Iₙ): 306 A Motor nominal current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery as well as assembly and commissioning can be arranged at extra cost upon request.

Tahun pembuatan: 2016, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Garis pencucian Film HDPE tahun konstruksi: 2016 0 jam kerja (tidak pernah beroperasi) Merek NEUE HERBOLD, D-74889 SINSHEIM terdiri dari: Granulator basah tipe SM 450/600-S5-2 Mesin cuci gesekan tipe FW 560/3000 Sekrup pengangkut Tangki terapung (Pemisahan bak penampung) tipe TB 500 Pengering Mekanis tipe TM 1005 Unit Hisap tipe MFT 55/500 Hpsdpetuui Dsfx Aazea Kontrol listrik

Kondisi: bekas, Demag KBK 1 Suspension Crane System Year of construction: approx. 2000 Monorail suspension crane system with single-girder crane bridge Light crane system made from KBK modular profile system Rated capacity: 125 kg Span: 5 meters Distance between longitudinal rails: 4.1 meters Hpjdpfxshrkrte Aazja Total length of longitudinal girder: 12 meters Crossbeam profile = KBK1 Longitudinal rail profile = KBK1 Comprising: - 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) - 1 trolley for crane suspension - 2 double trolleys for longitudinal rails - 10 bolt clamps for crane suspension or ceiling mounting (without beam clamps) - 6 end caps suitable for KBK1 rails

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Hjdpetyyn Hofx Aazspa Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Hedpfstrbcbox Aazopa Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mould installation height: 1100-1800 mm Injection volume: 5195 cc Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition. -    Additionally, complete cutting units available. -    Includes a conveyor belt and robot systems (model year 2012).

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, EN-2587k-used-compound-granulation-line-translation Hedpfx Aetvfhcoazspa

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. daylight: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, a set of new pumps, and GEIGER LR 16 EC handling system. The handling system requires an overhaul. Hpodsiiv Aqspfx Aazea

Tahun pembuatan: 1996, jam operasional: 24.222 h, Kondisi: baik (bekas), This Dr. Boy injection moulding machine is currently located in the Plastima Used Machinery warehouse. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 80M – Year of manufacture: 1996 – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T Hodpfx Aajpwh Akszopa – Operating hours: 24,222

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Wire diameter: 0.1 - 1.3 mm Hsdpfxo Syv To Aazopa Cut length: 5 - 70 mm Output: up to 400 cycles/min Complete with cooling unit and motorized wire spool

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t Hsdpfxotunccs Aazjpa From series production