Mesin cetak injeksi

KraussMaffei KM 65-160 C2

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin cetak injeksi KraussMaffei KM 65-160 C2 bekas, tahun pembuatan 2002, dengan sistem pendingin yang lengkap dan pendingin proses Frigel Microgel terpisah. Produsen: KraussMaffei Tipe: KM 65-160 C2 Jenis mesin: Mesin cetak injeksi Tahun pembuatan: 2002 Nomor mesin: 641741 Nomor pesanan: 646746/1 Gaya penutup: 650 kN / 65 t Berat mesin: 3.200 kg Codpsz Aln Aefx Akaerh Jam operasional: 91.836:45 jam Tegangan operasi: 400 V Fasa: 3 Frekuensi: 50 Hz Arus total: 153 A Arus motor: 30 A Sekring utama: 160 A Sistem pendingin: Beberapa sirkuit pendingin Pengeluaran: Sabuk konveyor Produsen pendingin proses: Frigel Firenze S.p.A. Model pendingin proses: Microgel RCD80/12HP Tahun pembuatan pendingin proses: 2012 Nomor seri pendingin proses: 1205114 Tegangan: 400 V Tegangan bantu: 110 V Frekuensi: 50 Hz Arus maksimum: 29 A Refrigeran: R407C Isi refrigeran: 2,4 kg Tekanan tinggi maksimum: 27 bar Tekanan rendah maksimum: 19 bar Media: Air Rentang suhu: -5 hingga +90 °C Tekanan maksimum sirkuit air: 8 bar Berat: 240 kg Tersedia mulai bulan APRIL 2027

Tahun pembuatan: 2018, Kondisi: baru, Load capacity: max. 1,000 kg. Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Cjdpedx Ryyofx Akaorh Coil height: max. 800 mm

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Mesin cetak injeksi KraussMaffei KM 65-160 C2 bekas, tahun pembuatan 2002, dilengkapi dengan peralatan pendukung lengkap dan pendingin proses Frigel. Produsen: KraussMaffei Model: KM 65-160 C2 Jenis mesin: Mesin cetak injeksi Tahun pembuatan: 2002 Nomor mesin: 641736 Gaya penguncian: 650 kN / 65 t Berat mesin: 3.200 kg Waktu operasi: 11.481:37 jam Tegangan operasi: 400 V Fasa: 3 Frekuensi: 50 Hz Arus total: 153 A Arus motor: 30 A Sekering utama: 160 A Csdpfoz Almrjx Akasrh Sistem kontrol: KraussMaffei Peralatan pendukung: Sistem penyediaan material, konveyor vertikal MTF, drum, pemantauan aliran / sirkuit pendingin, dan pendingin proses Frigel. Pendingin proses Frigel: RCD80/12HP Tahun pembuatan pendingin proses: 2013 Tegangan: 400 V Tegangan bantu: 110 V Frekuensi: 50 Hz Arus maksimum: 29 A Refrigeran: R407C Isi refrigeran: 2,4 kg Media: Air Rentang suhu: -5 hingga +90 °C Tekanan maksimum: 8 bar Berat: 240 kg Tersedia mulai bulan APRIL 2027.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, We are pleased to offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2010 onwards as trade-ins. Please offer us your available machines. Comprehensive maintenance by the manufacturer up to present. Injection Moulding Machine Krauss Maffei KM65-160 C2 Injection Moulding Machine: Manufacturer / Model: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Complete annual maintenance by the manufacturer Clamping Unit: Clamping force: 650 kN / 65 tons Tie bar distance: 405 x 405 mm Min. mould installation height: 250 mm Max. platen opening: 750 mm Standard mounting platens: 610 x 610 mm Crsdpfeh Dp R Eox Akaeh Ejector stroke: 150 mm Core pull: 1 unit Injection Unit Injection unit size / cylinder diameter: 160 / Cylinder ø25 mm and cylinder ø18 mm Max. shot weight (ø25): 47 g/PS Injection flow rate: 63 cm³/sec Specific injection pressure: max. 2500 bar Handling interface: Euromap 12 Dosing interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil capacity: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is immediately available from our warehouse. Loaded free on truck of the buyer or delivered free to location with reimbursement of freight costs. For information about the machines we offer and our company: - We only sell machines purchased out of ongoing production from our own stock in Hanover. - All offered machines are inspected and tested before dismantling. - We do NOT sell insolvency equipment – we are NOT brokers dealing in third-party property. - All machines offered come from successful companies where maintenance and care are a matter of course. - All machines offered are available for viewing in our warehouse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Crsdpfxopdr Aie Akaoh Shot volume: 154 cm³ Enlarged mounting platen: 660 x 560 mm Minimum mold height: 200 mm

Tahun pembuatan: 1988, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 3284, • Protective panels surrounding the machine. Minimum material thickness: 0.65 mm Maximum material thickness: 2 mm Technical data: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth, negative/positive: 6/20 mm (22 mm negative available on request) Top heater max.: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Air consumption (depending on production): max. 1,250 l/min Csdjhbu E Hepfx Akajrh Maximum water flow rate: 1.0 m3/h COMPACT AND ROBUST – designed for high continuous output and user-friendly operation. Ergonomically optimized (e.g. product removal height 1,300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, i.e. optimum material utilization for both rectangular and round lids (heater replacement is straightforward). PRECISION – Accurate forming table guidance via guide columns with linear ball bearings. The reliable guarantee for precision. OPTIMUM CUTTING ACCURACY AT HIGH OUTPUT Cam-controlled functional processes ensure maximum repeat accuracy.

Kondisi: bekas, Tahun pembuatan: 1988, nomor mesin/kendaraan: 724306, Pressure: 63 t Strokes: 400 strokes/min Sheet width: 180 mm Stroke: 10 - 80 mm Feed length: 150 mm Strip width: 180 mm Control system: KAISER Codecxxt Tepfx Akasrh Voltage: 380 V Space requirements approx.: 1.85 x 2.70 x 3.00 m + original Kaiser gripper feed Model ZR 18 D

Kondisi: baru, Tahun pembuatan: 2025, Sudut pembengkokan (maks.): 150 °, ketebalan pelat baja (maks.): 1 mm, ketebalan pelat tembaga (maks.): 1 mm, ❗❗ Electric Folding Bench RED-3200/1.0/150* with Notch ❗❗ Discover a new era in metalworking with our revolutionary sheet metal folding machine, seamlessly blending traditional craftsmanship with cutting-edge technology. We present a machine that not only meets but exceeds your boldest expectations. Don’t miss the opportunity to equip your workshop with a groundbreaking tool that eliminates the usual hassles of manual bending, delivering unparalleled convenience and efficiency. Folding Machine / Bending Machine / Roofing Folder Polish manufacturer PROD-MASZ / brand new, direct from the manufacturer With our folding machine, equipped with an advanced electronic control system, precision and ease of operation come as standard. Now, with the push of a button, the bending process is initiated, ensuring flawless results without unnecessary exertion. Magnets mounted on the bending beam ensure stable positioning of the sheet and allow for precise adjustment—key to achieving perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the capability to bend steel sheets up to 1.0 mm thick, with an additional 30% capacity for non-ferrous metals. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the limits of precision and efficiency. In addition, the machine features a three-stage upper beam height adjustment and a range of essential accessories, including a protractor, angle limiter, rear support table for sheet holding—quick adjustment with a handwheel. Optional additional equipment: - Stop with scale—quick adjustment via hand crank, extra €1,250 - Rotary shear (max. cutting capacity 0.8 mm / steel), extra €350 - Manual seaming machine, extra €75 Cedpfxecv R Dkj Akajrh Shipping costs: €360 throughout Germany Delivery date: every Monday/Tuesday Payment: cash on delivery or prepayment We look forward to hearing from you! -> Invoices issued

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 241.125, Fungsionalitas: berfungsi sepenuhnya, Bandsaw horizontal produksi Schelling, dirancang untuk memotong material berbasis kayu HPO – program optimisasi pemotongan Proyeksi mata gergaji: maks. 95 mm Kecepatan gerak carriage gergaji hingga 120 m/menit Panjang pemotongan: Model FH 4 430 - 4.300 mm Dapat diperiksa dalam kondisi bekerja hingga awal 2026. (pembongkaran direncanakan) Diameter maksimum mata gergaji – 350 mm Proyeksi – 95 mm Bukaan penjepit 90 mm Credpfxox Ebzde Akaeh Daya motor gergaji – 15 kW Diameter scorer 300 mm Laju masukan material maju hingga 80 m/menit mundur 80 m/menit Laju gerak gergaji maju hingga 120 m/menit mundur 120 m/menit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Perlengkapan: Pelat tipe tersedia, Volumetric Dosing Systems – Granulate, Powder, and Regrind We offer a range of fully operational volumetric dosing systems, ideally suited for conveying granulate, powder, and regrind materials. Credpfjvmylzex Akash • Various models available: We have different dosing units in stock, which can be adapted to suit your material and application requirements. • Testing option: Upon request, we can test the dosing units with your specific material to ensure they meet your requirements. • Reliable performance: All units have been tested and are ready for immediate operation. Contact us, and we will help you find the right dosing system for your needs. We are happy to answer any questions or provide advice!