Mesin cetak injeksi

KraussMaffei KM 650 - 8000 CM

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 130 mm, volume langkah: 6.172 cm³, tekanan injeksi: 1,296 batang, lebar pelat: 1.700 mm, tinggi pelat: 1.704 mm, TECHNICAL DETAILS Clamping Force: 6,500 kN Maximum Mold Opening Force: 346 kN Platen Traverse Force, Opening: 169 kN Platen Traverse Force, Closing: 144 kN Mounting Plate (W x H): 1,704 x 1,700 mm Clearance Between Tie Bars (W x H): 930 x 930 mm Mold Opening Stroke: 1,150 mm Minimum Mold Height: 600 mm Daylight: 1,750 mm Ejector Stroke: 250 mm Ejector Force Forward/Return: 226 kN Injection Unit Screw Diameter: 130 mm L/D Ratio: 20 Injection Pressure: 1,296 bar Shot Volume: 6,172 ccm Shot Weight (PS): 5,617 g Injection Rate: 1,540 ccm/s Screw Speed: 138 rpm Plasticizing Rate: 238 g/s Nozzle Contact Force: 246 kN Electrohydraulic Equipment Rated Pump Motor Output: 132 kW Installed Heating Capacity: 70 kW Cylinder Heater Zones: 7 MACHINE DETAILS Space Requirement (approx.): 12.00 x 2.80 x 2.70 m Total Weight: 43,000 kg EQUIPMENT - Oscillation elements Dusdpfjx Dbtwox Aftjp - 1 x air valve - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Dujdpfebqt Arex Aftsp We can also offer you an Entex PL WE 70!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN Duodsnh Rnuspfx Aftop - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Dedpeh S Dncofx Aftoup Year: 1999 Screw diameter: 55 mm In excellent condition, still in operation

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Unit baru, stok gudang, siap kirim segera - Kapasitas: 18.000 liter - Tmax: 450°C - Dimensi dalam (P x L x T): 4100 x 2100 x 2100 mm - Dimensi luar (P dengan rel): 9970 x L 3060 x T (dengan pintu angkat) 6110 mm - Sistem kontrol: Eurotherm Nanodac - Stabilitas suhu (pada suhu nominal tanpa muatan): ±5 °C - Katup udara masuk dan buang otomatis - Pintu angkat elektrik - Gerbong tungku bertenaga listrik - Daya: 247 ± 9% kW - 400 V, 50 Hz - Dokumentasi, deklarasi CE Kami juga menyediakan pemasangan, commissioning, serta pelatihan operator Anda. Silakan hubungi kami! Kami menyediakan tungku industri baru dan bekas. Peninjauan di gudang kami berdasarkan permintaan! Dujdpfju Hma Nsx Aftop Tungku, oven, tungku annealing, tungku pembakaran, tungku hardening, tungku pemanasan, oven curing, tungku pengering, tungku industri.

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Flat die: Films up to max. 330 mm width Duodpfx Afou Ttf Nstep Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Dedeva H Amspfx Aftsup Drive: Hydraulic

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.000 kN, diameter sekrup: 120 mm, jarak antara tiang: 1.120 mm, diameter kolom: 180 mm, volume langkah: 5.430 cm³, Perlengkapan: dokumentasi / manual, Машината е готова за товарене. 900-тонна сила на затягане, оборудвана с робот за изваждане, сушилня за бункер, товаро-подател за бункер, дозиращо устройство за мастербач. Първи и единствен собственик от производството. Цената е за товарене на камион. Dsdpfx Afoickd Hoteup

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ Duedstrya Rspfx Aftop - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Tahun pembuatan: 1996, Kondisi: baik (bekas), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: used, fully functional Model: KMD-2-50-KK Output capacity: max. approx. 140–180 kg/h for H-PVC pipes; output may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50–103 mm (conical) Screw length: 1300 mm Screw rotation speed: max. 43 m/min Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed section heating zone: 1 Duodeh Nmt Dopfx Aftep Tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw temperature control Gearbox: Gearbox was installed at 53,000 operating hours. Refurbished screws and barrel. Note: Current operating hours: 62,590