Mesin cetak injeksi

KraussMaffei KM 650-3500 C 1

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Njdpstyyn Hsfx Aahowr Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Trafo distribusi kering kering, 3 unit, 2000kVA, produsen SGB Jerman, rasio tegangan 22000 (± 2 x 2,5 %) /400V, Dyn1, IP31 atau IP00, Al/Al, unit evaluasi suhu, berfungsi, kondisi fungsional. Nsdpfx Aolpd Tcjahswr

Tahun pembuatan: 1999, Kondisi: baik (bekas), de-KRONE K 50-4 ID-NR. 2834 Kronen Salatschleuder Modell K-50-4 zum Trocknen von Gemüse, Obst, Salaten etc. Kapazität bis zu 1.200 kg/Stunde, abhängig vom Produkt. Nsdpou Iv Avjfx Aahowr Abmessungen: 85 x 60 cm, Höhe 100 cm.

Kondisi: hampir baru (bekas), Set, packed in a wooden crate, screw and barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Nwodpfjdm Aghex Aahjr

Kondisi: sangat baik (bekas), Brand: KENT Model: KGS-250AHD Type: Tangential Working surface: 460 x 200 mm Longitudinal travel: 540 mm Cross travel: 260 mm Distance from spindle center to table: 490 mm Max. weight on table (including magnetic chuck): - 103 series: 250 kg - 818 series: 150 kg T-slot: 14 x 1 mm/N Table longitudinal speed: 5 - 23 m/min Handwheel cross feed: 1 division = 0.02 mm, 1 revolution = 4 mm Automatic cross feed per pass: 0.1 - 5.5 mm Automatic feed rate: 50 Hz - 820 mm/min; 60 Hz - 980 mm/min Grinding wheel dimensions: 180 x 13 x 31.75 mm Spindle speed: 50 Hz - 2850 rpm, 60 Hz - 3480 rpm Vertical handwheel: 1 division = 0.01 mm, 1 revolution = 2 mm Automatic downfeed increment: 0.002 - 0.02 mm Spindle motor: 2 x 2 HP X P Elevation motor: NA kg x cm Nsdoh Ha Ipopfx Aahewr Hydraulic pump motor: 1 x 6 HP X P Coolant pump motor: 1/8 x 2 HP X P Cross feed motor: 1/5 x 6 HP X P Machine height: 1775 mm Machine dimensions: 3260 x 2460 mm Net weight: 1300 kg Gross weight: 1500 kg

Kondisi: baik (bekas), Spectro CIROS CCD water analysis device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Nodpfxsfiqn Uo Aahowr Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before purchasing to avoid any ambiguities. For general inquiries or to arrange a viewing appointment, I am available at the phone number listed below at any time. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Shipping via freight forwarding company.

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Nwjdpfx Aetunccsahjr Machine weight approx.: 32 t From series production

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BT40 - Spindle drive power: 24/32 [kW] - Spindle speed: 12,000 [rpm] - Spindle operating hours: 9,122 [hrs] LINEAR AXES - Travel X/Y/Z axes: 650/765/520 [mm] - Rapid traverse speed (X/Y/Z): 40/40/36 [m/min] - Feed rate (X/Y/Z): 18/18/18 [m/min] SWIVEL AXIS A - Travel: 150 [degrees] (+/-) - Rapid traverse speed: 20 [rpm] - Feed rate: 7,200 [mm/min] Nwedpeuhbz Ujfx Aahsr SWIVEL AXIS B - Travel: 360 [degrees] (+/-) - Minimum resolution: 0.001 [degrees] - Rapid traverse speed: 30 [rpm] - Feed rate: 7,200 [mm/min] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 120 - Tool change time: 1 [sec] TABLE - Table size: 500 x 500 [mm] - Max. table load: 500 [kg] - Distance from table to spindle nose: 160/680 [mm] PALLET CHANGER - Pallet size: 500 x 500 [mm] - Number of pallets: 2 - Pallet change time: 30 [sec] ELECTRICAL SUPPLY - Total power consumption: 54 [kW] MACHINE HOURS - Power-on hours: 24,226 [hrs] - Operating hours: 9,122 [hrs] ACCESSORIES - Control: Heidenhain TNC530 - Interface: RS232 / USB / PCMCIA - Electronic handwheel - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] - Through-spindle coolant (IKZ) - Chip conveyor - Spindle cooling - Tool measuring probe: Renishaw - Electrical transformer

Tahun pembuatan: 2024, jam operasional: 10 h, Kondisi: hampir baru (bekas), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without difficulty. The stuffing unit reliably compacts loose material and feeds it directly to the extruder. This ensures uniform material intake and stable extrusion, even with challenging feedstocks. Nwedpfxjtziude Aahjr Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and bulky materials such as EPS or film regrind • Efficient material feeding thanks to integrated stuffing unit • Compact design, easy to maintain - Single-screw extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (suitable for low bulk density material) - Large filter / screen changer - Strand die adapted

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Nwedsbqt Arspfx Aaher We can also offer you an Entex PL WE 70!