Mesin cetak injeksi

KraussMaffei KM 850-12000 MX

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 Robot LRX 500 Z axis: 4000 mm X axis: 1500 mm Y axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Hedpfx Ahswqdyiewsi Complete plasticizing system for thermoplastics with 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: 8500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1600 mm - Mold height (min-max): 500 - 1100 mm - Daylight opening: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Injection volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic Equipment - Rated pump drive power: 132 kW - Dry cycle time (Euromap 6): 965 1/h - Oil tank capacity: 2440 l Weight and Dimensions - Net weight incl. control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of Manufacture 2017) Year of Manufacture: 2017 Control Unit: CC300 Operating Hours: 565 h Availability: Immediately Clamping Unit: Clamping Force: 500 tons Opening Stroke: 1100 mm Tie Bar Distance: 1500 × 1285 mm Platen Size: 1500 × 1285 mm Minimum Mold Height: 500 mm Maximum Daylight (Open Distance): 1600 mm Injection Unit: Screw Diameter: 120 mm Screw Length (L/D): 22 D Hedpjxvingjfx Ahwsi Injection Volume: 5430 cm³ Maximum Injection Pressure: 1600 bar General Data: Motor Power: 98 kW Heating Capacity: 30 kW Clamping Unit Weight: 31 tons Injection Unit Weight: 15 tons Machine Dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core Pulls: 3 Robot Interface: No Bi-metallic Screw/Cylinder: Yes Other Equipment: STAUBLI magnetic plates, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and is part of ENGEL's modern tie-bar-less Victory series, ideal for large molds and high-precision production.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t Hodotrya Rjpfx Ahwoi - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 14.500 h, Fungsionalitas: berfungsi sepenuhnya, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar distance: 420 x 420 mm Mould height min. / max.: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Hjdpfx Ahou E E Sujwsi Max. shot volume: 154 cm³ Shot weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Shot weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 x core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year of manufacture: 2010 - Conveyor belt - Safety fence

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit Hedpfxov I Eq So Ahwoi - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The unit enables dosing and mixing of up to 4 granular components. Actual, measured, and weighed quantities are continuously compared with set values using a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: - 2 feeding hoppers for virgin material or regranulate/virgin material - 2 feeding hoppers for premixes or additives - 2 pneumatically controlled conical dosing heads - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, allowing recipe, regrind, and process data management, vibration compensation, and continuous self-optimization; built-in Ethernet port and standard reporting/printing functions Technical specifications: Average throughput: 60 kg/h Hjdpfx Aowm Ii Tehwji Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, oil and water free Weight: approx. 60 kg ✅ Material loaders from Piovan, as shown in the photos, are included in the sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 23.170 h, gaya penjepit: 2.500 kN, diameter sekrup: 60 mm, tekanan injeksi: 2.005 batang, berat injeksi: 618 g, tinggi cetakan (min.): 330 mm, Spritzgussmaschine Krauss Maffei 250-1400CX mit Roboter und Gas-Boost (225) Artikelnummer: 225 Verfügbarkeit: auf Lager Baujahr: 2016 Hersteller: KRAUSS MAFFEI Technische Daten: Schussgewicht: 618 g Hodsvtzkfspfx Ahwji Einspritzvolumen: 848 ccm/s Schließkraft: 2.500 kN Schneckendurchmesser: 60 mm Einspritzdruck: 2.005 bar Holmabstand: 630 x 630 mm Plattengröße: 1.135 x 1.180 mm Einbauhöhe Werkzeug min.: 330 mm Plattenöffnungsweite max.: 1.150 mm Steuerung: MC6 Bedienersprache: Deutsch Anschlussleistung: 70 kW Betriebsstunden: 23.170 h Gewicht: 15.000 kg Abmessungen: 6,5 x 2,3 x 2,3 m Trichter: nein Kernzug: ja Euromap-Schnittstelle: ja Luftventil: ja Heißkanalanbindung: ja Gasspeicher: ja

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) Only 17,000 hours in automatic cycle! Technical main parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Tie bar spacing: 1160 x 1160 mm Platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection speed: 544 g/s Max. injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50,000 kg Equipment and features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pulls (4x fixed platen, 4x moving platen) with servomotor 432 – 8x core relief Hsdpfx Ahewtgltowei 662E – 16x integrated hot runner zones 623 – Acoustic alarm 237C – Safety clamping force sensor 430C – 8x pneumatic cascade controls Cylinder and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable I/Os Flowmeter with 6 pipes + hoses + cable trays + valves + filters + nozzles + operation, all according to Lamky specification (Stäubli quick couplings) Total sockets: 4x 230V/16A, 2x 400V/16A, 4x 400V/32A Center ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core pull circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed side, 4x moving side E65 – Interface for temperature controllers (4 zones) 236 – Automatic ejector rod retraction (operator side)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2600-109101 / Schaltschrank: 6700-101707, berat keseluruhan: 550 kg, kapasitas angkut: 12 kg, produsen pengendali: ABB, model controller: IRC5 M2004, tegangan masuk: 400 V, arus masuk: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of manufacture: 09/2017. Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Control cabinet: ABB IRC5 M2004. Year of manufacture: 11/2014. Used, complete, in very good condition, tested and can be demonstrated. (Further details see type plates). We also offer accessories such as pedestals, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot for you. Packaging and loading included. Hjdpfx Ajucx Hdohwsi