Mesin cetak injeksi

KraussMaffei KM300-1900C2

Tahun pembuatan: 2003, Kondisi: diremaj di bengkel (bekas), Stock No. 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput: up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and knife head, 4.4 kW drive By-pass system Guodpjiyyf Iefx Aabja TVE 1000 ED pellet dryer, 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200-liter water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available ex stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruder.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour. Bottle formats: 500ml/750ml/1000ml/1500ml. Maximum blow air pressure: 40 bar. Dimensions (L/W/H): approx. 7000mm/4300mm/3100mm. Weight: approx. 20,000kg. Includes Transver AG preform feeding system, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation is available. On-site inspection possible. Gsdpfx Ajt Eu Azsabsua

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 62.235 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 70 mm, berat keseluruhan: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Technical data at a glance: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar Gujdpfx Aovxzw Noabja - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Maximum platen size: 1,200 x 1,100 mm - Maximum ejector stroke: 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal structure - Removal cell with machine enclosure - Carton separator feed system - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series provides free access to the mould area, allowing the use of larger moulds on smaller machines, thereby increasing efficiency. This construction also offers significant advantages for automation, as robots and peripheral equipment can be more easily integrated. The machine is equipped with the ENGEL control system, renowned for its user-friendly operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the demand for cooling water. In addition, the machine comes with a MORETTO dosing device and an ENGEL linear handling system, supporting production automation and enhancing overall productivity. With a total of 62,235 operating hours, the machine is in used but functional condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • L/D ratio: 22 • Calculated injection volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max screw speed: 167 min⁻¹ • Max plasticizing capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / clamping force: 950 mm / 129 kN • Injection flow: 725 cm³/s • Injection flow with dual pump (option): 906 cm³/s • Atmospheric injection flow with accumulator (option): 1,812 cm³/s • Cylinder heating power: 53.9 kW Gujdpfxowzy N Uo Aabja • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector stroke / force: 300 mm / 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump motor power: 90 kW • Heating power: 53.9 kW • Oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping Unit Parameter Value Clamping force 8,000 kN Mounting plate dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min./max. mould height 500 – 1,050 mm Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection Unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio 20 Electrical-Hydraulic Equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Gsdpfx Ajwy U E Uoabjua Dimensions and Weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Guodpeuiykdofx Aabja

Kondisi: hampir baru (bekas), Tahun pembuatan: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Guodpfeikfmhjx Aabea

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, 1 used injection moulding machine Manufacturer: NETSTAL Model: ELION800-270 Year of manufacture: 2007 Clamping force: 80 tons Tie bar distance: 410 x 410 mm Minimum/maximum mould height: 500 mm Gedpfswf I Hiex Aabeua Opening stroke: 350 mm Screw diameter: 35 mm Maximum shot volume: 123 cm³ Shot weight in PS: 118 g

Kondisi: baik (bekas), Tahun pembuatan: 2004, VC330-80 plus Leto: 2004 Guedpsvdqbhjfx Aaboa Zatezna sila: 800 kN Vbrizgalna enota: 330 Krmilna enota: CC200 A01 Polž premera 40 mm Delovne ure: 91.112 1x izvlek jedra 4x digitalni vhod, 4x digitalni izhod 1x enofazna vtičnica 1x trifazna vtičnica Nova črpalka

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 650W500V/200HL. 2F 2-component machine Godpfjgrafvex Aabeua  Tie-barless design  2000 kN clamping force  Screw diameter unit 1: 45 mm, unit 2: 45 mm  Max. shot volume unit 1: 226 cm³, unit 2: 183 cm³  Mold installation height: min. 250 mm, max. 750 mm  Year of manufacture: 1998