Robot linier

KraussMaffei LRX-S 350

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei KM 2300 - 12000 MC Injection Moulding Machine Year: 2004 Control system type: MC 4 Operating hours: 93,900 Clamping unit Clamping force: 23,000 kN Max. mold opening force: 1,420 kN Moving platen stroke force (opening): 227 kN Moving platen stroke force (closing): 203 kN Mold plate dimensions (H x V): 2,830 mm x 2,400 mm Tie bar spacing (H x V): 2,000 mm x 1,600 mm Mold opening stroke: 2,600 mm Minimum mold height: 1,100 mm Maximum mold height: 1,800 mm Maximum daylight: 3,700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Shot volume: 8,588 ccm Injection weight, PS: 7,815 g Injection rate: 1,019 ccm/s Screw speed: 113 1/min Max. plasticizing rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor power: 132 kW Installed heating capacity: 997 kW Number of barrel heating zones: 7 Bedpswq Ed Aefx Am Town Drying cycles per hour: 350 1/h Tank capacity: 2,500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Max. mold weight: 62,000 kg LRX 1000 Robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Bjdpfxsuiykdj Am Tswn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Bwedpfx Ameikfmho Tsn

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Bwodjyh I Emopfx Am Tjn

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), A large-format injection moulding machine Krauss-Maffei, without robot, conveying equipment, safety enclosure, or attachments, is available. Clamping force: 1300t, injection volume: approx. 8,000cm³. Overall system dimensions (L/W/H): approx. 13,000mm / 3,550mm / 2,850mm. Machine weight: approx. 83,000kg. Operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected availability from Q1/2026. Bwsdpfswut Hyjx Am Ten

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 81.000 h, Data teknis Tahun pembuatan: 2007 Sisi penutup Gaya penutup: 1300 t Maks. jarak bukaan/t tinggi pemasangan: 2300 mm Bwedeyifgkepfx Am Tsn Jarak maksimum pelat penjepit: 4000 mm Tinggi pemasangan cetakan min./maks.: 1000 - 1700 mm Tinggi maksimum pelat penjepit: 1910 mm Ukuran cetakan minimum: 1000 - 1700 mm Jarak bebas antar tiang: 1500 mm Radius nosel: R40 mm Berat cetakan: 29000 kg Stroke ejector: 350 mm Sisi injeksi Diameter screw: 135 mm Volume langkah: 8588 cc Core puller AWS/DS: 1/1 Penutup jarum pneumatik: 1 Mesin dikirim bersama robot Kuka dan dapat dilihat dalam operasi produksi.

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 99.161 h, gaya penjepit: 32.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 230.000 kg, sales-description-kraussmaffei-injection-molding-machine Bwodpfx Amoyt H Dhe Ton

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 98.806 h, gaya penjepit: 40.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 255.000 kg, de-EN-20240617-km4000-sales-ad Bwedpfx Ajyt Hy Nsm Ton

Kondisi: baru, Tahun pembuatan: 2025, 1 Bwodpfx Amoy Umpuo Ton

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 Bjdpfx Aeyhby Hjm Tswn • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)