Mesin cuci botol

Krones

Kondisi: bekas, de Laodpfxeixqg Nj Aahjk

Tahun pembuatan: 2000, Kondisi: baik (bekas), Klinger bottle washer, year of manufacture: 2000, capacity approx. 10,000 bottles/hour, Siemens S7, volume cell, currently set up for 330 ml + 500 ml + 500 ml swing-top bottles. Bottle diameter: 50 - 90 mm / bottle height: 110 - 330 mm. Lasdpfoiuw Ixjx Aahsk

Kondisi: bekas, Tahun pembuatan: 2010, en-overview-this-bottle-washing-machine-arcade-gel-6-was-built-i n-2010-by-the-german-manufacturer-gm-gera-the-machine-is-still-in -operation-and-can-be-inspected-at-any-time-the-arcade-gel-6-is-f ully-functional-and-is-being-replaced-due-to-an-increase-in-produ ction-capacity-technical-details-nominal-capacity-33-000-bph-adju stable-range-13-200-36-300-bph-chain-pitch-169-mm-cell-pitch-110- mm-bottle-cells-per-row-30-units-total-bottle-cells-7-860-units-l oaded-bottle-cells-7-680-units-consumption-compressed-air-1-m-3-s team-operation-489-kg-h-steam-heating-4-430-kg-h-electrical-power -48-4-kw-water-7-35-m-3-h-tank-volumes-pre-soak-2-263-l-alkaline- pre-wash-7-240-l-alkaline-tank-1-31-755-l-alkaline-tank-2-350-l-h ot-water-tank-1-350-l-hot-water-tank-2-350-l-cold-water-350-l Lodpfst Ul Exjx Aaheak

Kondisi: bekas, Tahun pembuatan: 1993, summary The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. Due to a decline in sales volume, the brewery’s bottling has been relocated, making this bottling line available. Thanks to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are constructed from stainless steel. Spare parts, such as bottle cells, are still available. In 2018, the main drive shaft, motor, and gearbox (SEW) were overhauled, and the carrier chain was replaced in 2015. The machine is still assembled and can be demonstrated. Technical Data: - Capacity: 23,000 bottles/hour - Cell spacing: 85 mm - Bottles per row: 16 - Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives Lasdpjl Hx Adefx Aahek - Steam heating - Operator side: left - CE certified - Chemical dosing pumps - Machine data sheet available - Fixed-pipe spraying controlled by machine cycle - Single-ended machine - Label discharge rear right - Finger discharge and finger infeed - Bottle discharge left - Bottle cells plastic - HMI Lauer - Caustic concentration measurement - 24 volt control voltage - S5 controller (conversion to S7 on request) - Regularly serviced - Water content in stainless steel - Steam extraction - Sample taps - KSB pumps in stainless steel - Insertable screens for baths - Water meter - Conductivity measurement by Endress - Additional equipment: spare parts included

Kondisi: bekas, Tahun pembuatan: 2024, Overview This bottle cleaning machine was previously used in a brewery. Due to its low operating hours, the machine is in excellent, near-new condition. It was replaced because the previous owner wanted to run bottle formats that were incompatible with this model. All tanks and the machine housing are made of stainless steel. The machine has already been dismantled and is stored dry, making it easy to load and transport. It comes with a 12-month warranty. Technical specifications: - Capacity: 9,500 bottles/hour - Cell pitch: 95 mm - Bottles per row: 25 Dimensions & weights: - Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg - Ready to operate with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg Year of manufacture: 2024 Formats: 0.25 l, 0.33 l, 0.5 l, 0.75 l Machine details / features: - Steam heating - Pre-cleaning and residual liquid removal by pulsed rinsing before washing - CE certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-rinse Lajdpevrfivsfx Aahek - Rotating spray nozzles - Single-ended machine - Infeed/outfeed via finger conveyor - Bottle pockets made of plastic - Concentration measurement - Liquid NaOH supply - Spindles made of stainless steel - 24V control voltage - Siemens S7 control system - Complete stainless steel machine body - Steam extraction - Machine dismantled and ready for shipping - Automated machine start-up (heating, etc.)

Kondisi: bekas, Tahun pembuatan: 2013, Overview The bottle washing machine was manufactured by the German company Krones in 2013 and commissioned in 2014. It has been serviced annually. Additionally, a surfactant caustic cleaning system and spare parts can also be purchased. DISMANTLING INCLUDED. Technical Data - Capacity: 66,000 bph - Maximum bottle diameter: 69 mm - Configured for the following formats: - Vichy 0.33l - Long-Neck 0.33l - Long-Neck 0.5l - NRW 0.5l - Steinie 0.33l Ledpfx Asl Hx Ensahsak

Kondisi: bekas, Bottle washer, manufacturer: Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, rated capacity 13,200 bottles/hour, 14 bottles/row, with 110 mm cell pitch, equipped with pre-spraying, pre-soaking, caustic solution with immersion soak and caustic spraying, 4 water rinses (2x hot, 1x cold, and 1x fresh water), with bottle head disinfection, S7 control system, year of manufacture: 1996. Dimensions: approx. 12,500 mm (L) x 4,645 mm (W) x 3,500 mm (H), weight: 33,000 kg. Laedpfx Aaorxuv Ashjk

Kondisi: bekas, Tahun pembuatan: 1993, Overview The triblock consists of a rinser, filler, and capper, manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine designed for the production of still and carbonated water or CSD. Technical Details Lasdpfjn Ek Niox Aahsk Capacity: 22,000 bph Bottle formats: PET 0.45l & 0.66l Closure type: PCO 1881 plastic screw cap Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinser with integrated recirculation system Filling with differential pressure system Filler equipped with quick-change star couplers for format changeovers Capper with fast format changeover Original mechanical filling valves by Simonazzi Control upgraded to Siemens S7 E300 PLC Cap hopper not included

Kondisi: bekas, Tahun pembuatan: 2007, Overview The bottle washing machine was previously used in a brewery in Germany. Due to consistent and thorough maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine is still installed and in operation. It is being replaced only because higher line speeds are required, even though it remains in excellent condition. Technical specifications: - Rated capacity: 13,000 bph (based on 1.0L mineral water bottles, format: 89 x 310 mm, weight: 600g) - Total number of bottle pockets: 3,240 units - Pockets per basket row: 18 units - Pocket pitch: 110 mm - Chain pitch: 169 mm Treatment times: - Total treatment time: 14.95 min - Total immersion time: 7.56 min - Lye immersion time: 6.73 min - Lye filling time: 7.73 min - Lye contact time: 7.89 min - Total internal spraying time: 70 seconds - Total external spraying time: 25 seconds Lodpfx Aaoxbr Slohjak Dimensions: - Casing (L x W x H): 8,530 x 2,300 x 2,990 mm - Overall dimensions (L x W x H): 8,880 x 4,200 x 3,330 mm - CE certified - Chemical dosing pumps included - Machine data sheet included - Rotary tube spraying system - Single-end machine - Label discharge at rear left - Label press included - Finger discharge & finger feed - Plastic bottle pockets - Complete machine frame made of stainless steel - Steam extraction

Tahun pembuatan: 2024, Kondisi: siap digunakan (bekas), Rated output: 9,500 bottles/h (based on 0.5l NRW bottles, 68x260mm, 370g), mechanical adjustment range: 3,800–10,450 bottles/h. Cycle time: 9.47s. Total bottle cells: 3,375, filled: 3,175, per row: 135 basket rows. Cell spacing: 95mm, chain pitch: 140mm. Drive lanes: 3 lanes, discharge lanes: 3 lanes. Total dwell time: 21.32min, total immersion time: 7.24min, lye immersion time: 5.34min, lye filling time: 7.05min, lye contact time: 9.91min. Total rinsing time: 123s, total spraying time: 47s. Water consumption: 2.61m³/h, 275ml/bottle. Heat consumption (operation): 721,715kJ/h = 172,247kcal/h, 75.97kJ/bottle = 18.1kcal/bottle. Heat consumption (heating up): 2,880MJ = 687,467kcal. Total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW. Compressed air consumption (at 6bar): 0.2m³/h. Ledowb E S Iepfx Aahjak Housing dimensions: 7,162x2,740x2,500mm. Total dimensions: 7,162x3,540x2,730mm. Minimum access opening (W x H): 3,840x2,000mm. Minimum ground clearance: 75 ±25mm. Infeed/discharge height: 645/1,165mm. Empty weight: 11,680kg, operating weight: 31,563kg. Floor load: 8,690kg/m², load per segmented support foot: 2,130kg. Number of segmented support feet: 12. The machine was operated for approximately 6 months and is therefore almost as new; documentation is included. On-site inspection is possible.