Van kustom

KUBOTA Kubota KX 41-2SC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 30.826 h, jarak pergerakan sumbu X: 660 mm, jarak lintasan sumbu Y: 355 mm, jarak gerak sumbu Z: 455 mm, produsen pengendali: HURCO, model controller: Ultimax, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 13.000 W, jumlah sumbu: 3, Hurco VM1 3-sumbu ini diproduksi pada tahun 2004. Mesin ini memiliki kecepatan spindel maksimum 10.000 rpm dan kecepatan pemakanan hingga 11.400 mm/menit. Dimensi meja kerja sekitar 760 × 355 mm, dilengkapi dengan pergantian alat otomatis dengan 16 posisi. Jika Anda mencari mesin milling berkualitas tinggi, pertimbangkan pusat pemesinan vertikal Hurco VM1 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Kecepatan pemakanan: maks. 11.400 mm/menit • Ukuran meja: sekitar 760 × 355 mm • Pergantian alat otomatis: 16 posisi • Jam kerja mesin: 30.826 • Kondisi: Bekas, kondisi keseluruhan baik; sepenuhnya fungsional dan siap pakai Perlengkapan tambahan Djdsylnbfopfx Alyowa • Pompa pendingin • Konveyor serpihan • Ragum mesin • Sistem probe 3D • Beragam set collet / Dudukan alat SK 40 • Lemari alat dengan meja kerja dan ragum • Aksesori tambahan sesuai kesepakatan Spesifikasi teknis Ukuran kerucut SK 40

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 0 km, warna: merah, berat kosong: 2.050 kg, berat muatan maksimum: 650 kg, tinggi angkat: 3.330 mm, lebar bucket penggalian: 1.160 mm, Tahun pembuatan: 2025, Perlengkapan: garpu palet, sekop standar, TECHNICAL DATA: Model: VOLT 600 Dedpfx Aew Ufplslyjwa Payload (kg): 650 Unladen weight (kg): 2050 Bucket capacity (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Total cycle time (s): 8 Operating time (h): 6 Speed (km/h): Low: 10 km/h, High: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dump reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Rated speed (rpm): Low: 800 rpm High: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE SYSTEM: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the sole authorized distributor of the Kingway brand in Germany. Only here can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We offer a huge selection of machines in stock, with around 100 machines available at any time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. Our customers also benefit from access to all spare parts and mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Vibratory plate compactor Wacker Neuson WPP 1540AW, year of manufacture 2016, 86 kg, petrol engine, water tank, serial no. 30119556 Dwodpof A Nwlefx Alyoa

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, de-002 Dwjdox D A Ddepfx Alyoa

Kondisi: bekas, kapasitas tangki bahan bakar: 128 l, Tahun pembuatan: 2018, jam operasional: 6.990 h, Berat kosong: 9.000 kg Dimensi (P x L x T): 699 x 220 x 257 cm Djdpfjzkaxfex Alyjwa

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 1 km, daya: 14,7 kW (19,99 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, warna: kuning, berat keseluruhan: 2.420 kg, berat kosong: 2.420 kg, berat operasi: 2.420 kg, tinggi angkat: 4.300 mm, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, jumlah tempat duduk: 1, kelas emisi: Euro 5, Tahun pembuatan: 2026, Perlengkapan: hidrolik, kabin, lampu depan tambahan, pendingin udara, sasis yang dapat disesuaikan, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require a substantial working range, high digging force, and a stable structure. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine, rated at 14.6 kW. This engine delivers stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket holding 0.09 m³, with a width of 460 mm. A bucket breakout force of 17.6 kN ensures efficient digging, even in tougher soil types. The maximum digging depth of 2,810 mm and maximum digging radius of 4,375 mm provide a wide working area without frequent repositioning. A maximum dumping height of 2,760 mm and a maximum digging height of 4,510 mm make it easy to load materials onto transport vehicles. Dimensions and Stability The total dimensions of the machine are 4,010 mm in length, 1,540 mm in width, and 2,360 mm in height at the top of the cab (1,380 mm to the top of the boom). The track contact length of 1,530 mm and a track gauge of 1,510 mm offer stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow for safe performance on less consolidated surfaces. Mobility and Maneuverability A tail swing radius of 710 mm enables easy operation in narrow spaces. The swing frame width of 1,350 mm and a counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, allow for smooth movement over uneven terrain. The durable undercarriage, with a track length of 1,895 mm, guarantees good traction and safe working conditions. Technical Specifications Operating weight: 2,420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2,200 rpm Maximum hydraulic system pressure: 18 MPa Maximum gradient (climbing ability): 30° Ground pressure: 35 kPa Maximum travel speed: 2.5–3.5 km/h Maximum drawbar pull: 16 kN Maximum swing speed: 11 rpm Maximum digging force: 15 kN Maximum digging height: 4,300 mm Maximum dumping height: 2,530 mm Maximum digging depth: 2,550 mm Dsdeymtdnopfx Alyswa Maximum digging radius: 4,150 mm Digging radius at maximum height: 2,700 mm Minimum radius: 1,800 mm Boom length: 1,950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3,950 mm Overall width: 1,400 mm Overall height: 2,300 mm Minimum swing radius: 790 mm Track length (ground contact): 1,870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1,330 mm Engine hood height: 1,350 mm Platform height above ground: 480 mm

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Hidromek HMK230 Quick Coupler Dwodpoyzad Eofx Alyoa

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, This listing is for informational purposes only and does not constitute a legal offer. YAMA S15 HAPPY – Compact Crawler Excavator for Professional Applications The modern YAMA S15 HAPPY mini excavator was developed for the highest demands. It is the perfect choice for professional users in construction, electrical and plumbing installation, renovation companies, as well as service providers in related industries. This model features an offset boom arm, which makes work in confined spaces significantly easier – ideal for precise operations in hard-to-reach areas. The mini excavators are manufactured under supervision and according to the standards of European engineers. The robust construction and high-quality components ensure reliable operation even under demanding conditions. TECHNICAL DATA: Operating weight: 1,500 kg Bucket capacity (standard): 0.03 m³ Engine: Laidong, 3-cylinder diesel Engine power: 18.4 kW / 25 HP Cooler: Oil cooler present Fuel tank: 15 liters Max. climbing ability: 35° Hydraulic system: Gear pump Dwjdjyk Txgjpfx Alysa Hydraulic pressure: 16 MPa Hydraulic flow: 25 l/min Travel speed: up to 2 km/h Platform swing speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa DIMENSIONS: Overall length: 2,550 mm Overall width: 1,100 mm Overall height: 2,170 mm Ground clearance: 380 mm Track width: 230 mm Track gauge: 920 mm Overall track length: 1,300 mm Bucket width (standard): 380 mm Dozer blade: – Width: 1,160 mm – Height: 210 mm – Max. lift height: 325 mm – Max. lowering depth: 175 mm WORKING RANGE: Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach: 2,400 mm Reach at ground level: 3,227 mm Max. dumping height: 1,750 mm Min. swing radius: 1,550 mm PRICE: Net: €10,400 Gross: €12,376

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, jam operasional: 21 h, High-performance mini dumper for sale in top condition! The machine is in excellent condition and ready for immediate use. Condition: Used, very good Operating hours: 21h Year of manufacture: 2025 The SCHORR Track Dumper RR500 DHKB 2 PRO is a versatile machine, powered by a robust 270 cm³ 4-stroke petrol engine with 9.2 HP. This performance allows the dumper to operate effortlessly in outdoor conditions and provides sufficient power for demanding tasks. Dwsdpewh I Hbsfx Alyoa Advantages of the SCHORR RR500DHKA2 Track Dumper: -- Powerful 9.2 HP four-stroke engine -- Durable track drive for high traction -- 500 kg payload capacity -- Removable side panels for increased load volume -- Automatic front gate opening during tipping -- Folding ride-on platform as standard -- 6 forward and 2 reverse gears The sturdy steel bed features removable side panels, allowing the loading area to be easily extended. Tipping operations are possible even on light gradients without difficulty. A generous tipping angle ensures that even fully loaded skip bins can be emptied completely without manual assistance. A major benefit is the automatic front gate opening during the tipping process, making unloading especially easy and comfortable, even under full load. The hydraulic tipping system enables effortless lifting and lowering of the skip. The extra-large hydraulic oil tank with integrated oil filter extends the machine’s service life and minimizes maintenance requirements. The powerful tracked drive ensures that uneven terrain, slopes, and curb edges can be mastered with ease. Durable rubber tracks provide stable footing in any working environment. Technical specifications: Manufacturer (short code): SCHORR Manufacturer model code: RR500 Model: DHKB2 Load capacity: 500 kg Tipping drive: hydraulic (stepless) Drive system: track Weight without/with packaging: 305 kg / 335 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 HP Transmission: 6 forward gears / 2 reverse gears Speed Forward: max. 8 km/h Reverse: max. 5 km/h Fluids Fuel tank capacity: 6 L (unleaded petrol) Hydraulic oil tank capacity: 3 L (ISO VG 32) Gear oil tank capacity: 1.5 L (SAE 80W-90) Engine oil capacity: 0.9 L (15W-40) Dimensions Overall length platform folded: 1870 mm Overall length platform unfolded: 2105 mm Overall width (including tracks): 770 mm Overall height: 1050 mm Container dimensions (internal): 1040 x 700 x 300 mm Container dimensions (external): 1100 x 755 x 310 mm Loading volume (level): ~218 L Loading volume (heaped): up to 500 L (depending on material) Track dimensions: 180 x 60 x 38 mm Packaging dimensions: 1600 x 770 x 1270 mm Loading height With side panels: 740 mm Without: 445 mm We at SCHORR are happy to answer any further questions you may have about our motorized wheelbarrows. You can reach our knowledgeable team by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 73.420 h, produsen pengendali: HURCO, model controller: Ultimax, Hurco VMX 24 3-sumbu ini diproduksi pada tahun 2004 dan dilengkapi dengan sistem kontrol CNC yang tangguh, HURCO Ultimax. Mesin ini menawarkan ukuran meja 760 × 510 mm dengan kapasitas beban hingga 850 kg. Spindel dapat mencapai kecepatan hingga 15.000 rpm, dan mesin ini dilengkapi dengan penukar alat otomatis dengan 24 slot. Ideal untuk pekerjaan milling yang detail. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Dwsdpjyb Da Ajfx Alysa