Mesin serut empat sisi

Kupfermühle VUIN 605

Kondisi: bekas, Tahun pembuatan: 1972, de-hu-001 Ppsdpfxewnhbxs Anwst

Kondisi: bekas, nomor mesin/kendaraan: 008127, Posisi 1: Mesin pelapis tepi satu sisi BIESSE + FORMETAL-AKRON 1440 A Posisi 2: Sistem pengembalian panel BIESSE + FORMETAL-AKRON 1440 A Ppodpew Tq Iwofx Anwot

Kondisi: sangat baik (bekas), Feed rollers for DOIN 605, VUIN 605, DK 14, DK 16, DK 17 and other spare parts as well as additional accessories Pjdpfx Aoic T R Ronwspt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, en Pjdpjx D Eyhsfx Anwept

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, 1 refurbished Paul slat separator, 2-lamella design, with fixed lamella on the right and movable lamella on the left (for left-handed machine). Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm Maximum wood length: 5.00 m Pedpfxotx A Sxe Anwjpt Equipped with 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers dismantled and reassembled with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported supports, easily movable, with new roller chain and 11 new deflection pulleys. Robust sheet metal lining between all rollers. As-new condition

Kondisi: bekas, Mesin Pengasah Gergaji Gatter Vollmer CNHV Tahun pembuatan: 1978 Lebar gergaji gatter: 60-160 mm Panjang gigi: maks. 1450 mm Pitch gigi: 14–40 mm Tinggi gigi: maks. 25 mm Ppodsxvz R Hspfx Anwjt Sudut keratan: 0° - 30° Ketebalan bilah: 0 – 6 mm Batu gerinda: diameter 200 mm Kecepatan kerja: 30, 50, 75 gigi per menit Bentuk gigi: 3 jenis Daya terpasang: 2,1 kW Berat: 500 kg Termasuk alat pelurus gigi gatter Lorroch SGB 6 (serupa dengan Meinert PH6D) tahun pembuatan 1983

Kondisi: baik (bekas), Tahun pembuatan: 1980, ukuran palet maks. 120 x 165 cm 20 pemandu paku tahun pembuatan 1980, masih dalam kondisi baik Ppsdoxpi N Rspfx Anwjt

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 108111, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 240 mm, tinggi penyerutan: 160 mm, tinggi kerja: 180 mm, Four-side planer after service inspection, machine weight 3,900 kg Psdpfx Aovrq U Denwopt

Kondisi: hampir baru (bekas),

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Ppjdpfx Ajv Si Szonwot Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location