Kabin sandblasting Kabin sandblasting

LandReko SCI 690L

Tahun pembuatan: 2024, Kondisi: baru, Working Chamber 1100 x 660 x 816 mm (W x D x H) Blasting Chamber Dust-proof negative pressure cabin in sturdy sheet steel construction Work Gloves Dcodpfsh Hxubjx Aaror Special rubber, wear-resistant, inner lining cotton, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closure, double-walled, foam-filled for noise reduction, lockable, with electric safety interlock Abrasive Recovery Via coordinated MHG recovery system Operation ON/OFF switches for extraction and lighting, pressure regulator, pressure gauge, and foot switch Viewing Windows

Tahun pembuatan: 2020, Kondisi: baru, Touch delete Dodofz I Ehepfx Aarocr ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, en-001 Dsdpfx Ajft Sqxjarscr

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), An injection moulding machine from Boy is available. Clamping force: 100 kN, tie bar spacing (diagonal): 205 mm, max. platen distance: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions (L/W/H): approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation available. On-site inspection is possible. Dedpfxsv Ext Io Aarecr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Vacuum tempering furnace Manufacturer: BMI Dodpsvcyf Tefx Aarocr Year of manufacture: 2001 Maximum temperature: 750°C Batch size (L x W x H): 1200 x 600 x 600 mm Heating: Electric Heating capacity: 100 kW

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Dsdpfedyah Sox Aarscr - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Clamping force: 62.5 kN, opening stroke: 110 mm, ejector force: 6.4 kN, ejector stroke: 60 mm, platen distance: 119 mm–229 mm, fixed platen (tool carrier): 247 mm/172 mm, moving platen (tool carrier): 128 mm/155 mm, screw diameter: 12 mm, injection volume: 6.8 cm³, injection pressure: 1360 bar. Machine dimensions (L/W/H): approx. 700 mm/1200 mm/1650 mm, weight: approx. 350 kg. Documentation available. An on-site inspection is possible. Djdpfx Aajwyxa Njrjcr

Kondisi: bekas, Rund trough vibratory finishing machine WALTHER TROWAL Type CLS-230 Serial No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Total trough outside height: approx. 650 mm Work bowl / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Power supply: 400 V, 50 Hz - Manual or timer-controlled operation - Infinitely variable motor speed via variator gearbox Dcedpfx Aajfqpxiorer - Manually adjustable eccentric imbalance weights - Bowl with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in separation screen device after separator flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Functional description: Workpieces and abrasive media are set in motion by generated vibration and are mixed very gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Kondisi: bekas, Rotary hammer, chipping hammer, combi hammer, Boschhammer - Drilling/chiseling Djdpfx Asb A Rl Ijarscr - SDS Plus: mount - Carrying case - Weight: 5 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 950 mm, panjang total: 600 mm, tinggi total: 1.850 mm, kebutuhan udara: 0,9 m³/jam, kapasitas tangki: 250 l, tegangan masuk: 230 V, berat keseluruhan: 180 kg, Perlengkapan: kabin, pencahayaan, XTON SANDBLASTER™ is a premium sandblasting and glass bead blasting machine, ideal for workshops with limited workspace. The 250-liter pressure-blast cabinet operates in a closed-loop system and features a unique filtration system with an integrated dust separator. It is designed for exceptionally quiet operation, enhancing operator comfort. The unit is equipped with high-quality, grain leather gloves that are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, the unit is available in a stainless steel version upon request. EQUIPMENT: - Work table with dimensions: 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATIONS: Dcsdperl R Dljfx Aarer - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Mains voltage: 230 V / 50 Hz - Rated operating pressure: up to 10 bar - Cleaning performance: 25 m³/h - Cleaning class: SA-3.0 – comprehensive and thorough corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive media valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Work table load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optionally stainless steel