Mortir

Lari and Lari 1B/1K-M

Kondisi: baik (bekas), Tahun pembuatan: 2005, Typ 1B/1K-M Maximale Werkstücklänge: 5000 mm Maximale Werkstückbreite: 300 mm Schlitzkapazität: 180 mm Maximale Arbeitshöhe 1/Max: 20 mm Anzahl der Motoren: 2 / 380 V, 50 Hz Luftdruck: 6 bar Hergestellt in Italien, Baujahr 2005 Transportabmessungen: 4200 x 2000 x 2400 mm Gewicht: 2000 kg Nljdsu Hi Trjpfx Abwec Preis: 4.900 EUR (ab Werk Jonava, Litauen)

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Drilling heads on each side at the front included. Njdpfx Absd N Rb Dswelc Very good condition. Available immediately.

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Nedpfebxz S Hex Abwjlc Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Max. planing width: 600 mm Max. planing height: 280 mm Cutterheads with strip knives Nlodpfxehuthyo Abwjc Immediately ready for operation

Kondisi: sangat baik (bekas), Soco автоматическая заклейщик коробов / аппликатор скотча Модель T55 Для коробок разного размера (рандомная настройка) Верхний и нижний клеящие головки Регулируемые по высоте опоры В комплекте: входной и выходной роликовые гравитационные конвейеры В отличном состоянии Доставка / отгрузка возможна по запросу Nedpfohvr Afjx Abwelc

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 926 h, tinggi total: 1.800 mm, panjang total: 11.250 mm, lebar total: 900 mm, de_hu_001 Nsdpfxsyna Ezj Abwjlc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Ref:11081 . 2014 Kolbus DA-270 Casemaker Nlsdeyzy Rrjpfx Abwec Für die Hochgeschwindigkeitsproduktion von festen Buchdecken, Hebelarchivordnern und Spielbrettern. Ausstattung: - 'Co-pilot'-System mit Touchscreen für automatische Formatverstellung, menügeführte Rüstabläufe und Störungsanzeige. - Doppel-Magazinableger für Pappen - Zentrale Soft-Spine-Zuführung mit Doppelrollenhalter für automatischen Rollenspleiß und Abfallabschneider - *Spezielle Vorrichtung zum Schneiden von mittigen Pappenstreifen* - Magazinableger für vorgestanzte Bezugsmaterialien mit Fehlbogenkontrolle - Mobile Heißleim-Einheit mit Vorheizer* - Beheizte Leimauftragswalze mit Abstreifwalze - Bezugsmaterialzylinder mit Greifern und auswechselbaren Platten für Gummipolster - Querstapelauslage mit Rollentransportband - Externe Leimauftragsverstellung - Leimviskositätskontrolle für automatische Wasserzufuhr - Presswalze für faltenfreie Verbindung Bezug zu Pappe - Einzelanforderung der Decken für Bediener-Einrichtung - Stufenlos regelbarer DC-Antrieb - Automatische Schmierung - Inklusive Zubehör & Handbücher Hinweis: Druckluft- und Wasserversorgung bauseits. Zubehör: - Vorrichtung zum Schneiden des mittigen Pappenstreifens für die Anpassung an unterschiedliche Buchformate bei digitaler Buchherstellung ° Maximale Materialstärke: 2 mm ° Maximale Breite: 1.500 mm | Minimale Höhe: 140 mm | Maximale Höhe: 390 mm ° Mittlerer Streifen maximal: 7 mm | maximal: 60 mm - Kolbus ECK-Eckenschneider (Standalone) zur Kombination mit Deckenmaschine Technische Daten: - Format aufgeschlagene Decke: max. 670 x 390 mm; min. 205 x 140 mm - Mittlerer Streifenbreite: 6 - 90 mm, Dicke 1 – 4 mm - Gelenkbreite: 4 - 15 mm - Einschlagbreite geschlossen: 8 – 15 mm - Leistung, variabel: bis zu 65 Takte/min - Aufstellfläche: L: 6.700 x B: 3.000 x H: 2.200 mm - Elektrische Anschlussleistung: 15 kW (3-phasig, 400V, 50 Hz) - Luftbedarf: 33 Nm3/h, 6 bar.

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. Nsdpfx Aexnlflobwelc - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Full-automatic finger jointing line: Type Doppel-Pack with automatic infeed with multiple cross-cut saw with stacking unit Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Nljdpfxeg D Ugkj Abwoc Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger jointing possible vertical and horizontal Type of glue: PVAC white glue, double-sided glue application Power supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely pre-wired up to the control cabinet. Finger length / optional wood cross-section and glue type can still be customized. Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (both sides of the part)

Kondisi: bekas, Chiron FZ18W Magnum Rotary pallet Year: 1999 CNC Siemens 840D Travel: X 630 / Y 400 / Z 425 mm Tables (2): 850 x 450 mm 20 tools ISO 40 spindle / 18 kW / 140 Nm Rapid traverse: 40 m/min HAWE hydraulics Automatic doors Nledpfx Aehkkwbjbwec Chip conveyor Weight: 6 tons Dimensions: 3.6 x 2.25 x 2.85 m The machine can be inspected under power at our warehouse Mimu Machine Tools (Italy)