Pengering ruang

LAUBER 1 5-C

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Lrjdpfov Si Szox Al Nsp Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, panjang total: 36.000 mm, Flatironing dryer, working width 4,600 mm, length 22,000 mm (of which 10,000 mm with pressure rollers), separate pressing/cooling section, heating medium: hot water, semi-automatic feeding device, type BFT46 with lifting platform, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017. Ledsv Hygfopfx Al Njrp A second flatironing dryer of a similar design is also available.

Kondisi: bekas, nomor mesin/kendaraan: 007984, 482bd3a4 Ledpjwqdbmofx Al Nsrp

Kondisi: baik (bekas), 0136 Marke: ITALPRESSE Modell: FORMATIC 20.9 Hydraulische Membranpresse Beidseitige Beschichtung von Furnier auf Platten, die auf einer Seite profiliert oder geformt und auf der anderen flach sind, zur Herstellung von Kassettenfronten, Schubladenfronten, Schreibtischplatten, Tischplatten, Küchenarbeitsplatten usw. 3D-Beschichtung von Kunststofffolien (PVC, PPE, ABS, Transferfolie) auf Platten, die auf einer Seite profiliert oder geformt sind, für die Herstellung von: Möbelfronten, Schubladenfronten, Schreibtischplatten, Tischplatten, Küchenarbeitsplatten, Ladeneinrichtungskomponenten, Zimmertüren usw. Plattengröße mm: 2000 x 900 Lichte Weite mm: 325 Zylinderhub mm: 325 Heizung (Elektrokessel): 27 kW Presskraft: 300 t Anzahl Presszylinder: 3 Hydraulikaggregat Leistung: 5,5 kW Druckregulierung mittels Manometer Automatische Druckrückstellung Öffnungszeitsteuerung Abmessungen (LxBxH) mm: 3300 x 1400 x 2400 Lrodpfxspbvqvj Al Nsp Gewicht: 8.100 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Press type JJZ-CP designed for the production of plywood, doors, and MDF boards. The feeding and removal of laminated elements from the press is performed automatically using driven rollers. The press can operate in conjunction with glue dispensers. Technical data: - Maximum pressure: 500T (adjustable) Ledpfstutwvox Al Njrp - Maximum material height: 1300 mm - Maximum material size: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Installation depth: approx. 500 mm below floor level - Infeed table: 2000 x 1960 mm - Outfeed table: 2350 x 2500 mm - Maximum power: 13.2 kW - CE mark

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 180 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 8.000 mm, lebar total: 1.200 mm, tinggi total: 1.300 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, daya: 10 kW (13,60 hp), SOEST Universal Surface Finishing Line for oiling, staining, lye treatment, patination, etc. Primarily for parquet surfaces up to 40 cm workpiece width. 1) RCR-400-L Reverse Roller Coater, for applying and removing surface products such as oils, stains, varnishes, etc. 2) VP-400-1B-2P-2B Brushing Machine with one brush, two pad discs, and another two brushes, for distributing and working in surface media or patinating into pores, and/or for removing, spreading, and distributing depending on the desired surface effects. 3) Accessories: two replacement application rollers, unused material pump, four spare brushes, various pad discs, and a pneumatic brush cleaning machine. This complete surface finishing line is engineered for professional industrial use and is configured with the highest level of equipment. A large range of accessories is included with the system, such as additional rollers and cleaning machines (see pictures!). Very robust construction, all motors are frequency-controlled (Siemens). Speeds are infinitely adjustable in forward and reverse operation. Maximum workpiece width approx. 410 mm. The system is in very good condition, used only about 180 operating hours and is therefore considered as new. This finishing machine served only as an auxiliary line in a parquet production facility and was used exclusively for specific surface techniques, explaining the low operating hours—meaning it was used only occasionally between 2019 and 2022. In 2023, our company downsized, and since then the equipment has been stored and is immediately available, thus it remains in almost mint condition! This equipment will no longer be used in our operations, which is why it is up for sale. Ljdpfx Aloyaiafj Nerp The original purchase price in 2019 was approx. €87,000, and the current sale price is negotiable! Inspection of the surface finishing system is possible by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (YouTube video is for demonstration purposes only and shows a similar system configuration!)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, as-new condition (only 5,000 m² of parquet processed), compact oil application line comprising: Roller Application Unit: For application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity of 18 l/min Frequency inverter for variable speed of application roller Frequency inverter for variable speed of counter roller Transport belt speed variable: 3 to 14 m/min Stainless steel recovery trays Lrodpfx Ajx Ah A Ajl Nop Pad + Brush Unit: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed variable: 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions (L x D): 300 x 160 mm Quick-change system for brushes UV / LED Unit: Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED output = 12 Watt/cm² Incl. ventilation fan Kevlar fabric transport belt Transport belt speed variable: 3 to 14 m/min Outfeed Conveyor Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed variable: 3 to 14 m/min Used Machinery Notice: • Technical details and intermediate sale subject to change. • Listed prices are ex-site, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines on-site. • Special agreements are valid only if provided in written form. (We only respond to inquiries containing your address and telephone number!)

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), furnierlinie-cremona-1999-technische-details Lodpfx Alow I E Dvo Nsrp

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kamar pengering vakum dari ISVE. Sistem kontrol ISVE telah diperbarui pada tahun 2024, mesin telah diperiksa. Ledpfxsxgdrbj Al Nsrp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, The line is fully operational and was modernized in 2019. Upgrades included, among others, the hydraulic system and control unit. Minimum material thickness – 20 mm Maximum material thickness – 130 mm Lredpfxjim Ez Do Al Nop Minimum material width – 30 mm Maximum material width – 130 mm Minimum input material length – 250 mm Maximum input material length – 1600 mm Minimum output material length – 250 mm Maximum output material length – 300 mm