Mesin serut empat sisi kecepatan tinggi

LEDINEK SUPERLES 300 5V-S150

Four-side moulder for lamellae 300 x 120 mm
Feed speed adjustable from 30 to 150 m/min.

Equipment: 2 horizontal cutter heads (top and bottom) Z 10
2 vertical cutter heads (right and left), Z 10
Equipped with jointers.

- Spindle speed horizontal cutters: 5,500 rpm
- Spindle speed vertical cutters: 6,000 rpm
- Vertical spindle diameter: 50 mm
- Clamping length vertical spindles: max. 185 mm

Tool diameters:
- Horizontal cutter heads: 205 mm
Bcjdpfxowz Nzmj Ahwjw
- Vertical spindle cutter heads: 160 - 205 mm

Cutter blocks:
- Planer shaft and thicknessing shaft with cutter blocks:
- 2 x Planer head 205 x 330 mm; Z=10, bolt clamping
- Planer knives for lamellae 3 x 35 x 330
- 2 x Hydraulic planer head 190 x 130 mm; Z=10, bolt clamping
- Planer knives for lamellae 3 x 35 x 130

- Weight: approx. 13,000 kg
- Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm
- Installed power: 154 kW


Additional Units

Bottom Scoring Saw

This unit is used for balancing groove machining on the lower edge of lamellae with a width over 200 mm. The saw blade is clamped with a flange directly onto a flat motor. Horizontal movement via pneumatic cylinder, scoring travel approx. 150 mm (movement between planks; activation by moveable spot detector). Area setup is manual; stroke is indicated by a counter.
Vertical movement via pneumatic cylinder, scoring travel approx. 30 mm (enables quick adjustment during machining between lamellae with/without balancing grooves).
End stop (groove depth) is set manually. Stroke is indicated by a counter.
Lamellae must be fed individually into the machine (not pushed together).

Technical data:
- Scoring saw: 15 kW
- Saw speed: 5,000 rpm
- Arbor diameter: 40 mm
- Max. cutting depth: 50 mm
- Tool diameter: 300 x 4 mm
- Suction hood connection diameter: 120 mm
- Additional feed rollers: one above, Ø240 mm; one below, Ø240 mm, toothed and hard chromed. Saw blade is supplied with scoring saw.
- Working range for scoring saw: from 37.5 up to 225 mm.


Motorised Infeed Side Pressure Roller

Pneumatically suspended. Motorised lateral width adjustment via control buttons. (If the spindle positioning control is optioned, lateral pressure roller is set from the control panel.) The set width is displayed on SIKO counter.
- Roller diameter: 190 mm
- Roller height: 40 mm


Automatic Jointer – Knife Equalising Device

The cutter knife equalising device is fixed mounted. Activated manually.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.