Gunting bekas

Lefort Mobile 600

Kondisi: baru, Tahun pembuatan: 2023, I am selling an alligator shear, metal shear suitable for cables, pipes, and profiles. Max. cutting force: 630 kN Cutting length: 600 mm Hjdpfx Aajlhrb Hs Nong Max. jaw opening: 280 mm Hydraulic pressure: 25 MPa Full cycles per minute: 7–8 ×/min Power consumption: 7.5 kW Weight: approx. 1,400 kg Dimensions (L×W×H): 1,600 × 700 × 1,300 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Hodpfxjvwlqqj Aa Neng Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: baik (bekas), jenis bahan bakar: diesel, Tahun pembuatan: 1995, Perlengkapan: boom yang dapat disesuaikan, kabin, pelindung kepala, FUCHS 714 wheeled material handler Year of manufacture: 1995 Hnjdpfxovu U Aqs Aa Neg Fully functional, operational. Elevating cab. More details available by phone.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 18.000 kg, tinggi angkat: 11.900 mm, jenis bahan bakar: listrik, tipe tiang: telescopik, tinggi konstruksi: 1.990 mm, berat kosong: 21.650 kg, panjang total: 5.540 mm, jenis penggerak: Elektro, lebar konstruksi: 2.000 mm, Pick & Carry Crane Mast type: Telescopic Hnedpfxot Dd Uwe Aa Nog Technical condition: good Front tires type: Non Marking Rear tires type: Non Marking Remote control

Kondisi: baik (bekas), jenis bahan bakar: diesel, berat keseluruhan: 17.500 kg, jam operasional: 9.700 h, nomor mesin/kendaraan: 8851860, Perlengkapan: kabin, VOLVO EW160 B excavator no. 8851860, year 2002, Hsdpfjvtp Dmox Aa Neng 1 bucket approx. 9,700 operating hours 88 kW

Tahun pembuatan: 2024, Kondisi: baru, Air Separators ZIGZAG Application Description: The ZIGZAG-type air separator is a device designed for cleaning materials in the waste recycling process. The separator separates light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials sized 0-150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator offers multi-point adjustment to ensure optimum purity of the separated fractions. ZIGZAG separators are used in various fields, including: - Weight-based classification of metal granulates Hsdpfx Aoua D Alja Njng - Cleaning shredded scrap from light fractions (foils, plastics, paper) - Removal of volatile fractions during WEEE recycling - Cleaning of plastics and rubber - Cleaning of municipal waste and glass - Dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a shared support frame. The first section features the ZIGZAG module, equipped with an inspection opening and adjustable flow gap for material throughput. The second section houses a cyclone designed for discharging the light fraction. Beneath the cyclone, a variable speed rotary valve ejects the separated materials. The fan with electronic speed control is located at the top of the assembly. The construction is partially adapted for loading and unloading via belt conveyors. The separator is equipped with a control cabinet featuring a comprehensive safety system.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-MF450HD Special Baler is the ideal baler for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing bulky items like used tires and car bumpers to a minimum volume. The baler stands out with its simple and safe operation and large feed opening, making it perfect for medium to high material volumes. By compacting these waste/recyclable materials you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return materials to the recycling stream. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Hnedpfx Asvug Dyea Neg Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long twin cylinders for even and early material compaction User-friendly lever operation Bale ejector for easy bale removal Additional retaining claws to reduce material spring-back Holder for 4 rolls of strapping band A quality product "Made in Europe" Suitable for compacting: PET bottles Food cans and tin containers Plastic canisters and plastic packaging Used tires and bumpers Big bags Cardboard and film Difficult-to-compact recyclables Additional options: Annual maintenance with UVV inspection Machine color as per RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands / strapping wire Motor 11 kW 32 Amp The demo video shows the BTS-MF550HD Special Baler. Can compactor, can baler, PET baler, PET press, tire baler, used tire baler, tire press, can press, baler, paper press, waste paper press, cardboard press, cardboard baler, film press, paper baler, waste baler, waste compactor, waste press, residual waste press, recyclables press.

Tahun pembuatan: 1979, Kondisi: siap digunakan (bekas), A Gebr. Pfeiffer ball mill is available. Drive power: 330 kW, diameter: 2400 mm, length: 5000 mm, number of motors: 2, motor weight: 180 kg, flywheel width: 3.2 mm. An on-site inspection is possible. Hnsdpfx Aaev Dwirs Nsg

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: belum diuji, berat keseluruhan: 18.000 kg, daya: 250 kW (339,91 hp), Untuk limbah besar, palet, kayu sisa, dll. Shredder poros tunggal dengan penggerak elektrohidrolik Lebar rotor: 2500 mm Hodsq I Rkdspfx Aa Njng Diameter rotor: sekitar 500 mm Motor listrik: 250 kW

Tahun pembuatan: 2011, Kondisi: baik (bekas),