Mobil yang membawa semitrailer

Lider Truck Carrier

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 8.500 kg, ukuran ban: 235/70 / 17.5, Tahun pembuatan: 2025, berat operasi: 38.000 kg, model sasis: Lider Heavy-Duty Chassis, Perlengkapan: ABS, Semi-Trailer Pengangkut Mobil. Lider Trailer untuk trailer tugas berat. Manufaktur berkualitas tinggi dan tahan lama. Standar EU. Sistem rem garis ganda. Garansi satu tahun untuk cacat manufaktur. Warna sesuai permintaan pelanggan. Kjdpfx Aajrdd A No Nodg

Kondisi: baru, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2025,

Kondisi: baru, nomor mesin/kendaraan: 1, berat kosong: 11.000 kg, berat muatan maksimum: 28.000 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 13.650 mm, lebar ruang muat: 2.550 mm, tinggi ruang muatan: 870 mm, suspensi: udara, ukuran ban: 245.70 r 17.5, warna: merah tua, Tahun pembuatan: 2020, Perlengkapan: ABS,

Kondisi: baru, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2026,

Kondisi: baru, berat kosong: 6.100 kg, berat muatan maksimum: 14.400 kg, berat keseluruhan: 20.500 kg, konfigurasi gandar: 1 as, suspensi: udara, ukuran ban: 245 70 17,5,

Kondisi: baru, Tahun pembuatan: 2025, tinggi total: 4.000 mm, panjang total: 7.000 mm, lebar total: 3.000 mm, masa garansi: 24 bulan, suhu: 80 °C, kebutuhan udara: 36.000 m³/jam, tegangan masuk: 380 V, kapasitas pemanasan: 345 kW (469,07 hp), daya: 40 kW (54,38 hp), bahan bakar: gas petroleum cair (LPG), konsumsi energi: 40 kWh, bahan isolasi: Mineralwolle, ketebalan isolasi: 50 mm, daya nominal: 345 kW (469,07 hp), Perlengkapan: pencahayaan, MAIN STANDARD Our paint booths are designed to meet all essential requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes within the booth are managed by a PLC system, ensuring consistent maintenance of the desired values. OPERATING PRINCIPLES OF THE BOOTH The processes in the booth are controlled via a control panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through intake filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters prior to being released. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this phase, fresh air from outside circulates inside the booth. DRYING PROCESS In this phase, 80% of the air passing through the booth is heated to 60°C and distributed into the booth. Since 20% of the solvents are released during drying, these are expelled with the exhaust air. Industrial paints are typically dried at 60°C, though the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying process, the heating coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices within the booth. The panel is constructed from durable galvanized sheet metal and steel profiles, and is fully enclosed for protection against dust and moisture. Electrical Devices and Control Panel: • The control panel features essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. Kedewzmcbepfx Aa Njdg • Operating devices use 380 V 50 Hz, while control units operate at 220 V. • The booth’s operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time values for paint flash-off, intermediate drying, and final drying can be easily set to the required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Kondisi: baru, berat muatan maksimum: 31.500 kg, berat keseluruhan: 42.000 kg, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2025, Perlengkapan: ABS,

Kondisi: bekas, Tahun pembuatan: 2010, X-axis travel 400 mm Y-axis travel 300 mm Z-axis travel 400 mm Total power requirement 3.6 kW Machine weight approx. 1.3 t Kdodpfjv T Np Nex Aa Njg

Kondisi: baru, berat muatan maksimum: 28.500 kg, berat keseluruhan: 38.500 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 13.600 mm, lebar ruang muat: 2.550 mm, tinggi ruang muatan: 900 mm, lebar total: 2.550 mm, tinggi total: 900 mm, Tahun pembuatan: 2025, Perlengkapan: ABS,

Kondisi: siap digunakan (bekas), Travel X/Y/Z: 400mm/300mm/400mm, Spindle speed: 2000 rpm, Spindle taper: SK40, Feed rate: 380mm/min, Rapid traverse X/Y/Z: 1200mm/min, Table size X/Y: 320mm/750mm, Quill stroke: 80mm, Milling head swivel: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, Weight: approx. 1300kg. An on-site inspection is possible. Kdedpfxevripte Aa Njg