Mesin pembentuk gigi

LIEBHERR WS 1

Kondisi: bekas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Kdedpfx Astycg Sedkel Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Kondisi: bekas, Laminator adonan Produsen: Seewer Rondo Model: SSO 62 Kjdpew Nw A Tsfx Adkodl Dimensi: 305x115x120 cm Daya listrik: 1,1 kW Tegangan: 380V 50Hz Dimensi sabuk: 62x130 cm

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Kodoynmpgspfx Adkjdl Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 33.318 h, gaya penekanan: 87 t, lebar total: 1.800 mm, tinggi total: 2.840 mm, berat keseluruhan: 8.300 kg, produsen pengendali: TRUMPF, model controller: TASC 6000, panjang produk (maks.): 3.020 mm, jumlah sumbu: 6, TRUMPF TruBend 5085 6-sumbu ini diproduksi pada tahun 2012. Dengan daya tekan 850 kN dan panjang tekuk 2.210 mm, mesin ini cocok untuk berbagai aplikasi penekukan. Antarmuka pengoperasian Touchpoint TruBend memberikan kemudahan penggunaan yang tinggi. Manfaatkan kesempatan untuk membeli mesin press brake TRUMPF TruBend 5085 ini. Hubungi kami untuk informasi lebih lanjut. • Jam operasi: Mesin 33.318 jam; Hidrolik 15.786 jam • Ketinggian bebas: 1.750 mm • Ketinggian pemasangan yang dapat digunakan: 385 mm (opsional dapat ditingkatkan: 615 mm) • Kedalaman jangkauan: 420 mm • Antarmuka pengoperasian: Touchpoint TruBend • Kecepatan maksimum sumbu Y (langkah kerja, opsional): 25 mm/s Kdodpfxjyhp Ede Adkel Spesifikasi Teknis Panjang tekuk: 2210 mm

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 163341, Manufacturing origin UK Voltage 400V 3-phase AC, 50/60Hz, max 58A Dimensions 200x260x250 cm Net machine weight 5010 kg TECHNICAL SPECIFICATIONS Capabilities Table size: length 900 mm / depth 410 mm X axis: 560 mm Y axis: 410 mm Z axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle centre to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min. rating): 18.5 kW Power (10 min. rating): 15 kW Power (30 min. rating): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Quantity: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Kjdpfx Adjw T Tp Rskodl Tool selection: free station number selection; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (Ø 125 mm with adjacent stations empty) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle chiller tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min The technical data is provided without obligation and subject to errors or omissions.

Kondisi: baik (bekas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre height: 125 mm Centre distance: 400 / 700 / 1025 mm Maximum longitudinal slide travel: 400 / 700 / 1000 mm Longitudinal Slide Table speed: 50 – 5000 mm/min Reversal delay: 0-6 s Minimum automatic feed: 1.5 mm Maximum travel: 400 / 700 / 1020 mm Maximum table swivel angle: 12 / 30 / 78° Cross Slide Swivel range: ±45° Rapid traverse: 40 mm Handwheel feed travel: 20 mm Maximum plunge depth: 1.7 mm Grinding Spindle Headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Rotational speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece Spindle Headstock Swivel range: 0 – 90° Kedpfxovca Izj Adkodl Speed range: 30 – 675 rpm Mounting taper: Morse 5 Collets: W25 Tailstock Mounting taper: Morse 3 Quill stroke: 30 mm Total power requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or currency of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Maximum wheel diameter: 275 mm Wheel width: 55 mm Module - max.: 6 Kdedstumrpjpfx Adkel Module - min.: 1 Control system: Siemens 840 C Total power requirement: 100 kW Machine weight approx.: 16.7 t Space requirements approx.: 5.2 x 2.3 x 2.4 m

Kondisi: bekas, Tahun pembuatan: 2017, Technical details: Grinding diameter: 280/320 mm Grinding length: 750 mm Kedpfxottxg So Adkjdl Centre height: 170 mm Machine weight approx.: 22.5 t Space requirement approx.: 4.7 x 3.65 x 3.0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Machining centre Manufacturer: KNUTH Model: EcoMill 350 CNC Kedotiauhjpfx Adksdl

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Kodpfx Ast Hww Dedksdl Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice