Pengembalian panel untuk mesin pita tepi

Ligmatech ZHR 01

Kondisi: bekas, nomor mesin/kendaraan: 007986, de-1 Iijdpfx Aox A Tggjlcsb

Kondisi: bekas, nomor mesin/kendaraan: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Iiodpfx Aljwuz N Noceb Number of tool stations: 16

Tahun pembuatan: 2010, Kondisi: bekas, Panel return system for use with a single edge banding machine. The panel is transported to the operator via a motorized belt and a roller/belt table. Equipped with Moeller mini control unit. Maximum panel dimensions: 2500 x 1450 mm. Maximum panel thickness: 60 mm. Working speed: 8 - 25 m/min. Working height from floor: 835 - 960 mm. Iiodporq Dmrefx Alceb

Kondisi: bekas, Panel return system for use with a single edge banding machine. The panel is transported to the operator via a motorized belt and a roller/conveyor table. Equipped with Moeller mini control unit. Maximum panel dimensions: 2500 x 1450 mm. Maximum panel height: 60 mm. Working speed: 8 – 25 m/min. Working height from floor: 835 – 960 mm. Iiedpjw Ahixjfx Alceb

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. Isdpfxjwyda Uj Alcoib • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) Iisdpfeqt Dmysx Alcjb - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Tahun pembuatan: 2024, Kondisi: baru, Return system Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edge banding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the KAM. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Technology Extension" for easy rotation of parts during cross edging. Optional: "RTS Compact Ergonomics Package", featuring a lifting table and air-cushion table at the end of the return conveyor for ergonomic working conditions. - Compatible with edge banding machines from all manufacturers - Single-person operation possible - Maximum ergonomics Isdpfx Aew Nadmelcsib - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 days - Rotation unit for small parts - Including conveyor belt (length 4500 mm, width 800 mm) Single-track roller conveyor RTS Compact control system, optional control box Availability: short notice Storage location: Flörsheim

Kondisi: baru, Model designation Iiedegvquwopfx Alceb Shark 332-1 CCS

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. Iiedpoiidm Nsfx Alceb - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Table length 1300 mm Table width 800 mm Lifting height 1010 mm Load capacity 1000 kg Iedpfofrztxjx Alceib Minimum lifting height 190 mm Connection voltage 380 V Total power requirement 0.75 kW Machine weight approx. 0.22 t Space requirement approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically powered and operated. They feature a safety contact strip for safe lowering operation. Versatile application in workshops, assembly departments, loading bays, etc.