Gergaji pemangkasan

LINCK CS12

Kondisi: baik (bekas), Die Maschine ist in gutem Zustand, inklusive Elektroschränke und Schleifmaschine. Pgedpfevdyr Nsx Aager

Tahun pembuatan: 2022, jam operasional: 400 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of Manufacture: 2022 Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Specification: - Base machine Lepton 5100 with screen decks 1 and 2 * Screen deck 1 aperture: 36 mm * Screen deck 2 aperture: 24 mm - Pre-screen deck with extended hopper and variably adjustable dosing roller - Volume measurement by loading - Pre-fitted for air separator - Compressor - LED lighting package - Radio remote control for all major settings - Diesel-electric drive, 80 kW - Axle leveling system Psdpjrt Uvzefx Aagsgr - Twin-axle, 80 km/h type approval - Total weight: 19,000 kg - Transport dimensions: 11.97 m length, 3.98 m height, 2.53 m width * No special transport permit required Suitable for screening: Compost, green waste, biomass, root wood, waste wood, municipal solid waste, RDF, various recyclable materials (not suitable for construction rubble or excavated soil) Additional information: Very good used condition, fully operational

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Max. planing width: 600 mm Max. planing height: 280 mm Podpohuthyjfx Aagogr Cutterheads with strip knives Immediately ready for operation

Kondisi: baik (bekas), Tahun pembuatan: 1995, Mesin bubut CNC siklus MONFORTS KNC 6, tahun 1995. Kontrol: Monforts MTC K. Jarak antara senter: 2000 mm. Diameter ayun maksimum di atas tempat tidur: 630 mm. Diameter ayun maksimum di atas dudukan pelana: 380 mm. Putaran spindle: 2–1800 rpm. Motor spindle: 21/15 kW. Lubang spindle: 71 mm. Chuck tiga rahang FORKARDT 400 mm. Pemegang alat Multifix ukuran C dengan 3 slot alat. Kebutuhan ruang: panjang 4000 mm, lebar 2200 mm, tinggi 1900 mm. Berat sekitar 5000 kg. Dokumentasi mesin lengkap tersedia. Mesin dapat didemonstrasikan dalam kondisi hidup. Pgedpfx Aohktd Noagsr

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Psdpfx Aofi Tg Heagjgr Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A refrigerated (insulated) milk tank from Fabdec is available. Capacity: 10,000 liters, length: approx. 3,000 mm, diameter: approx. 2,200 mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included. Pgodpfst Hxdlex Aagjr

Kondisi: hampir baru (bekas), Socolest DAS 200 Twin-Shaft Multirip Saw with Infeed and Outfeed Tables - Italian manufacture - Centering infeed table - Discharge outfeed table - Upper feed rollers TECHNICAL SPECIFICATIONS: - Cutting height: 200 mm - Cutting width: 400 mm - Motor power: 2 x 55 kW - Track width: 630 mm - Maximum blade diameter: 350 mm - Feed speed: 40 m/min - Hydraulic height adjustment for shafts - Hydraulic adjustment of cutting height - Hydraulic feed - Four upper feed rollers - Four rows of anti-kickback fingers - Shaft diameter: 70 mm - Sleeve diameter: 90 mm - Pneumatic side centering pressure - Port diameter: 2 x 250 mm - Minimum workpiece length: 720 mm - Laser guide - Belt infeed table: 5700 mm - Table width: 600 mm - Pneumatic upper pressure roller - Table speed controlled by frequency inverter - Outfeed table: 9200 mm Pgedpfxjqup Ans Aagjr - Roller width: 800 mm - Roller diameter: 135 mm - Four discharge chains - Chain spacing: 1900 mm Transport dimensions: 1300 cm x 240 cm x 200 cm Weight: 8 t

Tahun pembuatan: 2024, Kondisi: baru, The mini pallet shredder is ideally suited for shredding small and/or disassembled pallets. Pgjdpfx Aaspahwvogjr

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 20.000 l, Diesel filling station – home refuelling station – tank installation – small tank station consisting of: 1 x 20m³ storage tank – brand new 1 x eco 75 fuel dispenser – brand new Description of steel tank: 20,000 litre capacity according to EN 12285-2 – Class B – (replacement for DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in areas classified as earthquake zone 0. The tank is equipped with two saddle feet, a manhole with dome cover, and comes with the following fittings: • 1 fill pipe with TW locking cap and dip tube, • 1 gauge pipe with dipstick and dipstick cap, • 1 vent pipe with vent cap, • 1 brand new overfill prevention device with type approval (AIII), • 1 ladder and 1 spare socket for withdrawal purposes, • 1 optical leak detection device with type approval and leak detection liquid. The tank exterior is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colours available for an additional charge.) Length = approx. 6.90 m + approx. 0.70 m (console) – Diameter = 2.00 m – Weight approx. 4.2 t – ex works, loaded free of charge – Description of fuel dispenser: Type eco 75 – not legal for trade, delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: • Fuel management terminal with connection to myTecalemit cloud • Includes web-based tank data management software – basic module – • 2 ID systems (driver/vehicle) for up to 4,000 users • Identification via transponder technology • USB interface for data retrieval • Vane cell pump with single-phase asynchronous motor – 230 Volt • Oval gear meter with pulse output, accuracy approx. +/- 0.5% • Angle seat/strainer filter with fine mesh • 4 m dispensing hose DN 25 with type-approved automatic nozzle, incl. swivel joint and hose holder • Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m • Robust powder-coated steel housing Dimensions: approx. 1,410 x 520 x 275 mm • Dual-line, illuminated monochrome display, character height 8 / 19 mm • Tank data memory for up to 10,000 dispensing records • Menu navigation in German, English and French Magnetic keys/transponders are additionally required. General: The price for the fuel station applies ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at favourable rates for an additional charge.) You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Additional tank systems (new and used) as well as rental systems are also available! Furthermore, we purchase existing tank systems and can, with certified specialist company qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and remove them. Podpfxoi Artlo Aagegr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, 1 Psdpfx Aow S Tyajagsgr