Lemari laci dengan alat pemotong logam

Lista Schubladenschrank mit Zerspanwerkzeug

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard Fedpfortd Uwex Adgeft - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: bekas, nomor mesin/kendaraan: 242350148, Here we offer a bench drill machine manufactured by Flott, model TB23L. The bench drill is mounted on a special lift table (not the original lift table). Technical data: - 6-speed manual spindle speed adjustment (via belt pulley) Fsdolf Evcspfx Adgjft - MK2 taper

Kondisi: baru, en-GB Ffjdek Egrpopfx Adgjt

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Ffjdpfxjgf H Sao Adgjt Space requirements: 2.8 x 2.8 x 2 m

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Fedpsiqkc Ijfx Adgjft Year of manufacture: 1982, 2 gearbox speeds 1400/2800 rpm Table size: 860 x 240 mm, 3 T-slots 14 mm, spindle taper SK30 Travel distances (X/Y/Z): 450/200/430 mm, horizontal speeds: 18 steps from 32 to 1342 rpm, vertical speeds: 18 steps from 72 to 2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overhead support arbor brackets, 1 collet chuck with key, 1 machine vice with handle.

Kondisi: baru, Bernardo Master 360 Pro Universal Lathe Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 502 mm Fjdpfxjd I H Ize Adgsft Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Speed Range (8 steps): 70 - 2000 rpm Longitudinal Feed Range (32 steps): 0.052 - 1.392 mm/rev Cross Feed Range (32 steps): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 100 mm Quill Taper: MT 3 Motor Power S1 100%: 1.5 kW (400 V) Motor Input Power S6 40%: 2.2 kW (400 V) Machine Dimensions (L x W x H): 1825 x 750 x 1600 mm Weight: approx. 576 kg *Removable gap in bed: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, as per DIN 55029 • Fixed steady rest – max. passage diam. 70 mm • Travelling steady rest – max. passage diam. 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine light • Reducing sleeve • Change gears • 2 dead centres • Foot pedal with brake function according to CE • Motor with electromagnetic brake according to CE standards • Stand with drawers • Operating tools

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, Fedsthd Shepfx Adgsft For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Tahun pembuatan: 1988, Kondisi: bekas, Voest Alpine DA 160 lathe, year of manufacture 1988, equipped with a three-jaw chuck and Multifix toolpost. Can be demonstrated under power by arrangement. Ffodjma Snxepfx Adgot

Kondisi: baik (bekas), Tahun pembuatan: 1963, Vertical turning lathe Ffodpfx Adevi Hrysgst Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5 - 180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further specifications, see data sheet. Machine documentation available. Machine dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Kondisi: bekas, Tahun pembuatan: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over support: 240 mm Turning length: 1100 mm Ffedpfx Aju Ix D Ajdgjt Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 rpm / 8 steps Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.3 x 0.9 x 1.3 m Equipment: Röhm 3-jaw chuck, Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slots for copying attachment Live center