Mesin multifungsi LOMBARTE

lombarte combi 260VS

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 20.200 h, kapasitas angkut: 5.500 kg, jenis bahan bakar: gas, Perlengkapan: hidrolika gripper, penjepit, For sale: Hyster S 5.5FT LPG Forklift The forklift is fully functional and in good condition. Note: Not supplied as pictured with forks, but instead offered with a Mayer paper roll clamp with hydraulic rotator from 2005 (see last photo). Technical Data: Year of manufacture: 2012 Rated capacity: 5,500 kg (5.5 tons) Load center: 600 mm Turning radius: approx. 2,375 mm - 2,534 mm Lift height: up to 5,300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (laden/unladen): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm x 1,420 mm x 2,500 mm Weight: approx. 7,800 kg Transportation and loading can be organized Europe-wide on request, subject to additional charges. All prices are exclusive of VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale Giodpowalyiefx Agreu PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet cost-effective metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Gedpfjh Eibaex Agroiu Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: sangat baik (bekas), tinggi angkat: 17.300 mm, Tahun pembuatan: 2022, jam operasional: 434 h, 1 Gijdpfx Aoym T Nwogrsu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Table saw ULMIA 1710s Year of manufacture: 1982 Gisdpfxjufgnzs Agrou Tilting angle: 45° Cutting length on sliding table: 750 mm Maximum blade diameter: 250 mm Cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table equipped with angle cutting scale Table dimensions: 1000 x 630 mm

Kondisi: baru, Tahun pembuatan: 2025, en_K5-250-1300-Specs Gjdevz E Sijpfx Agreiu

Kondisi: bekas, Fungsionalitas: fungsi terbatas, 1. Surface planer – roller width: 260 mm Gedpjqwg Efjfx Agrjiu – table length: 1560 mm 2. Thickness planer – max workpiece thickness: 180 mm 3. Drill press – max tool diameter: 18 mm – drilling depth: 80 mm – drilling width: 140 mm – adjustable table (up/down, front/back, and lateral movement) 4. Circular saw – SAW BLADE MISSING 5. Spindle moulder – spindle diameter: 30 mm – adjustable spindle CONDITION AND COMPLETENESS AS PER PHOTOS

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing set: Gsdpfx Aofzzhysgreiu - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR - Condition: very good

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 36 kW (48,95 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 45 l, warna: kuning, berat keseluruhan: 2.900 kg, berat muatan maksimum: 4.000 kg, tinggi angkat: 1.014 mm, ukuran ban: 11.5/80-15.3 Mitas TS-05, kondisi ban: 100 persen, konfigurasi gandar: 4x4, jumlah tempat duduk: 1, kelas emisi: Euro 5, Tahun pembuatan: 2025, jam operasional: 1 h, Perlengkapan: penggerak semua roda, === TECHNISCHE HAUPTDATEN === Baujahr: 2025 Betriebsstunden: 2 h Betriebsgewicht: 2.690 kg Max. Nutzlast: 4.000 kg Muldenvolumen: 2,3 m³ (gehäuft) Getriebe: Hydrostatisch Allradantrieb: Ja Differentialsperre: Ja Schnellwechsler: Nein Kabinentyp: Offenes ROPS / Optional geschlossene Kabine Heizbare Kabine: Nein Klimaanlage: Nein Bereifung: Geländereifen 4x4 Motorhersteller: Perkins 403J-E17T Motorleistung: 36 kW (49 PS) Abgasnorm: Stufe V Hydraulikleistung: n. a. CE-Zertifizierung: Ja === BESONDERE MERKMALE === Neues 2025er Modell mit nur 2 Betriebsstunden Perkins Stufe V Motor – leistungsstark und kraftstoffeffizient ROPS-Rahmen oder auf Wunsch geschlossene Kabine Vollständige CE-Zertifizierung und Dokumentation enthalten Kompakter und robuster Dumper für schwere Einsätze Verstärkte Mulde mit 2,3 m³ Volumen (gehäuft) === ZUSTAND === Neu, unbenutzt und voll einsatzbereit Geprüft und sofort verfügbar Direkt ab Lager in Sittard === STANDORT & LIEFERUNG === Standort: Sittard, Niederlande Weltweite Lieferung möglich Preis auf Anfrage (EXW, zzgl. MwSt.) Zuverlässiger Dumper aus Erstbesitz mit vollständiger CE-Zulassung und Prüfunterlagen Ideal für Erdbewegung, Bau und innerbetrieblichen Transport Gsdsxg Dcaopfx Agroiu Gefertigt in Österreich nach höchsten Qualitätsstandards Umfangreicher Service durch das Colle Rental & Sales Expertenteam === ANLIEFERUNG === Kranverladung auf Anfrage für einfache Handhabung Flexible Transportlösungen nach Ihren Vorgaben Alle Logistikabläufe werden professionell durch Colle Rental & Sales abgewickelt

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change Giedpfx Agsx Nqqxereu * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 590 h, Fungsionalitas: belum diuji, en-1 Godjvnq Rkspfx Agrjiu