Perangkat las

Lorch Micor Mig 400

Kondisi: baru, Bandsaw NEBES TM 275 – 400 V Three-phase NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Entirely cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tension gauge Front-mounted controls and two cutting speeds Coolant pump exclusion switch Pgodpfx Ajh Nm Ncol Isk Blade guide with hard metal (H.M.) pads Round cutting capacity 0°: 220 mm Square cutting capacity 0°: 200 x 200 mm Rectangular cutting capacity 0°: 230 x 185 mm Round cutting capacity 45°: 150 mm Square cutting capacity 45°: 150 x 150 mm Rectangular cutting capacity 45°: 150 x 200 mm Round cutting capacity 60°: 90 mm Square cutting capacity 60°: 90 x 90 mm Rectangular cutting capacity 60°: 90 x 120 mm Power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm Pgedpfx Aelgvkijl Iek - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: baik (bekas), Tahun pembuatan: 2012, Eksposisi untuk Gudang Produksi dan Perakitan Disewakan Gudang produksi dan perakitan siap pakai Fasilitas lengkap - 850 m² - Instalasi kompresor tersedia - Overhead crane 40,0 t (2 x 20 t overhead crane putar) - Overhead crane 10,0 t - Gantry crane 5,0 t - Overhead crane 20,0 t - Overhead crane 12,5 t Pgsdpfx Alsygkins Iek - Press Tuschier Millutensil MIL303 - Tinggi kait crane 7 m - Tinggi pintu masuk truk 4,5 x 5 meter - Troli bengkel lengkap dengan alat dan perangkat pengangkat - Kantor mandor dan ruang rapat dengan AC - Toilet pria dan wanita - Tersedia mesin bubut dan mesin gerinda - Koneksi fiber optic tersedia (kontrak melalui Telekom memungkinkan) Sewa dapat segera dilakukan Lokasi: 35232 Dautphetal, Industriestr. 9 Jadwal kunjungan dapat diatur berdasarkan kesepakatan

Kondisi: baru, Tahun pembuatan: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Art.No. 6020 The fully automatic UniBohrFix 100 drilling machine positions, clamps, and drills your material on the X-axis at the desired position. All you need to do is press the start button. The horizontal gripper of the positioning system allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or loading an already written program, the machine operates completely autonomously. The Y-axis can be set by the operator via a handwheel with digital display. Advantages • A series of holes is automatically drilled at precise intervals. • Operator errors are significantly reduced. • Programming takes just a few minutes. • Excellent price-performance ratio. • Significantly reduced manpower requirement. Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vise (clamping range 200 mm) Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (Technical data see data sheet) Anti-rotation device Motorized height adjustment Thread cutting device NC positioning system PD 200p Feed force 200 kg Positioning by absolute or incremental values possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic end stop clamp with high holding force Steel guide rail with precision rack Steel carrier profile for dirt protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm Pgodpfx Alsfu Itbe Iok Load capacity 200 kg/m Height-adjustable rollers Mounting brackets Roller width 407 mm Insert plates Bracings Roller diameter 50 mm Steel rollers We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, jangkauan lengan: 1.300 mm, The perfect package for your welding automation featuring the latest UR10e robot series – please do not purchase any more CB series. Are you looking to automate your welding operations with a collaborative robot to tackle future challenges? The OH-au2mate Cobot Welding Solutions with Lorch power source is exactly what you need! This perfectly coordinated package combines: Pjdpfx Aet S U Auel Iegk - High-quality robot technology from the market leader Universal Robots - Innovative welding technology from Lorch - Intuitive operating software Package contents in detail: UR10e robot ready for welding, control elements, torch holder, Translas 8XR fume extraction torch, Lorch S5 400A welding power source.

Kondisi: baru, Tahun pembuatan: 2026, CNC drilling and milling machine Kudu with CNC control and tool changer (3-axis) Drilling and milling machine with movable processing unit – the table remains stationary, and the drilling head moves. The drilling unit can operate both manually and fully automatically. After each drilling cycle, the processing unit automatically moves to the next drilling position along the X and Y axes. Operation is designed for ease of use. Data transfer to the machine control is possible via DXF/DWG file formats using a programming station. Alternatively, programming can also be performed directly at the machine control unit. The system is highly robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drill head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • X, Y and Z axis driven by servomotors Pedpefu Ivzjfx Al Iogk • Rapid traverse in X axis: 20 m/min • Rapid traverse in Y axis: 5 m/min • Distance from table top to bottom edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St 50 (tool-dependent) • Tapping: M4 – M30 (with compensation chuck) • Y-axis travel: 300 mm • Positioning tolerance X axis: ±0.1 mm • Positioning tolerance Y axis: 0.06 mm • Positioning tolerance Z axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Compressed air connection: 8 bar • Front safety via light barrier • Rear access protection via safety fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimal quantity spray system • Without material clamping devices • Remote maintenance via Teamviewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions, rotational speed • Simulation of work processes • Digital handwheel Your benefits: • Workpiece surfaces are protected • Clear, graphical user interface • Machining directly at the workpiece end is no problem • 50% space savings compared to moving-table systems • Chips are collected in a chip tray • Easiest programming & operation • Minimal quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right Pgsdpfxed Iipxe Al Iok - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Kondisi: sangat baik (bekas), Motorized 3x3 Welding Column with push-button movement control. Psdeu Afttopfx Al Ijgk Usable capacity: 3x3 m Wire spool dispenser included. Submerged arc welding set Lincoln Idealarc DC-1000 with welding torch, flux hopper, and Lincoln NA-3N control panel for amperage and voltage adjustments. Submerged arc duty cycle: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 V Input current: 193/96.5 A Input frequency: 60 Hz Input phase: 3 Input power: 230/460/3/60 Mode icon: CC/CV Output range: 150-1300 A DC, 16-46 V Polarity: DC Rated output: 1000 A / 44 V / 100%

Kondisi: baru, The NEOPULSE 400 CW, featuring digital technology, is a three-phase MIG/MAG pulsed welding machine designed for heavy industry applications. Mobile and equipped with a cooling unit and a high-performance wire feeding system, the NEOPULSE 400 CW is ideal for tackling the most demanding tasks. With its intuitive and user-friendly digital interface, welding parameters can be adjusted with ease. MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm Pedpjmxkggsfx Al Isgk - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, lebar total: 3.500 mm, panjang produk (maks.): 5.000 mm, jumlah sumbu: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilt axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional Equipment: • Robot control and teach pendant • Bumper (remote protection) and protective film for the teach pendant • Multifunctional flange for magnetic mounting on the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – component search using welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • operate: quick start buttons (Start / Stop / Reset / Emergency stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for universal robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilt axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm bore pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barrier (safety PLC for 2-station operation) Machine Benefits Technical Advantages Pgodjx D E Huepfx Al Iok • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder including integrated freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools and 3 cabinets shown in the images are included in the scope of delivery. Additional Information Machine still powered on.