Hid. tekan rem

LVD PPBLH 200/30

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 48.274 h, gaya penekanan: 326 t, jumlah sumbu: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, an electrohydraulic top drive, and a 2D graphical control DA 69 on a 10.4" color screen. The machine is equipped with a 6-axis CNC backgauge, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced under a TRUMPF maintenance contract. Please contact us for more information about this machine. • Clear column spacing: 3680 mm • Installation height: 535 mm • Control unit: 2D graphical control DA 69 on window with 10.4" color display • Electrical equipment: for 3-phase 400V / 50Hz • The machine has been serviced annually • Maintenance contract available • Rigid machine frame, fully welded steel construction • Press beam with high flexural strength • High-dynamic electromechanical direct drive (torque motor) • Electrohydraulic top drive via proportional valves • Modern block hydraulic system • Inductive length measurement system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper Modufix tool clamping system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numeric workshop programming • Integrated Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-capable, teleservice via modem • Electrical cabinet air conditioning Redpfx Adsx D D Hyj Rjr • Side-mounted safety doors and rear safety guard • Two-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomic package: comfortable front work area and footrest • 2 storage consoles and 2 document trays • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tooling maintained, all within tolerance Additional Equipment: • Backgauge system with 5 axes and electrical cabinet air conditioning • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support arms • 1x bending aid with 900 mm parking position • Table extension for base table / auxiliary table Technical Specification: Bending length: 1020 mm

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Redpfxed R Er Do Ad Rsr Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (L/W/H): 3200x2300x1350 mm Weight: 3,780 kg Standard equipment: - EZM9910 control unit - Backgauge range of 750 mm, programmable via control unit - Plastic inserts for hold-downs - 1 side stop and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Ball screw spindle - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Further machines are available for demonstration at our facility in Staufenberg. Further information available on request.

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 190454, Penawaran 25290 Data teknis: Rodpfjw Sthdjx Ad Rsr - Lebar kerja maks.: 3040 mm - Ketebalan material maks. pada kekuatan 40 kg/mm²: 2 mm - Sudut tekuk dapat dipilih sebelumnya: 6° - 135° - Lebar bukaan maksimum / stroke pelat penjepit atas: 250 mm - Penyesuaian tinggi: - pelat tekuk: 50 mm - pelat penjepit bawah: 50 mm - Penggerak pelat penjepit atas: 400 V / 0,37 kW - Penggerak pelat tekuk: 400 V / 0,75 kW - Penahan belakang manual - Rel tekuk jenis kaki angsa tersegmentasi - Kebutuhan ruang sekitar: P 4000 x T 1400 x L 1200 mm - Berat sekitar: 3500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 250 t, berat keseluruhan: 22.800 kg, CNC press brake Manufacturer: Weinbrenner Model: GP250 Rodpfx Aor Sxq Red Ror Machine specifications: - Crowning system - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de_Schenck_-_Schenk_Wuchtmaschine_H_50_V/B_gebraucht_mit_Messein heit_CAB_690_H__Aufrüstung_auf_neues_CAB_920_möglich_(Aufpreis_18 .000–20.000_€). Die Maschine wird mit den originalen Fundamentzeichnungen, Dokumentationen und Betriebsanleitungen geliefert. Ein Probelauf der Maschine ist in Kerava möglich. Rotor-Kapazität: - Rotorgewicht: 20 – 6.000 kg Rodpfx Adex Ein Ss Rer - Max. symmetrische Belastung auf Lagersockel: 7.500 kg - Max. symmetrische Belastung auf Ständerlagern: 3.750 kg - Beladung mit geringeren Gewichten ist unter Einhaltung der empfohlenen Verfahren möglich. - Max. Rotorgewindelänge zwischen Lagersockeln: 1.600 mm (Riemenantrieb) - Max. Durchmesser über Maschinenbett: 2.100 mm - Spannbare Rotordurchmesserbereiche: 25–180 mm, 180–380 mm - Maschinenbettenlänge: 3.500 mm - Auswuchtgeschwindigkeit n abhängig vom Massenträgheitsmoment des Rotors, auszuwählen zur Vermeidung von Überlastung des Antriebs. - Zulässiger maximaler G·n²-Wert: 1.400 × 10⁶ kg/min² - Gilt für einen steifen, symmetrischen Rotor auf Lagersockeln. - Darf bei dynamischen Tests mit flexiblen Rotoren und Festigkeitsprüfungen überschritten werden. - Stirnantrieb / FU-Motor: 7,5 kW - 4-Gang-Getriebe: 120–2.520 U/min - Riemenantrieb BU 5 / FU: 7,5 kW - Unwucht Umar 0,5 gmm/kg: 0 gmm/Ebene

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 7.900 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, produsen pengendali: Siemens, jenis laser: Laser CO₂, produsen sumber laser: Trumpf, jam kerja laser: 7.850 h, daya laser: 3.200 W, diameter punching: 76 mm, Perlengkapan: alat penukar nosel, ekstraksi asap, ekstraksi debu, henti darurat, kendali jauh kaki, penghadang cahaya keselamatan, perangkat ganti cepat, sistem pelumasan terpusat, unit pendingin, Laser TruFlow 3200, including LensLine with optimized standby Nozzle change device Multitool drive "Multishear" function "Multibend" function Tapping function Fast "Marking" / "Beading" function Engraving function Rolling and deburring function "Softpunch" function Active Die Stripline Repositioning with pneumatic cylinders Dampened installation Chip conveyor with container Ball work table with brush inserts Blow-off device SheetMaster (3000 x 1500) Sheet separation system with side air blow Additional positioning guides for format (2500 x 1250) Additional positioning guides for format (2000 x 1000) Rodpfx Aex N Hyvod Ror Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good parts conveyor on punching side Good parts conveyor on laser side Warehouse interface No. 21 RTC tool cassettes incl. die holder plate

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet. Rjdpfx Adehrnbke Rsr

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. Rsdpfx Adjd Ixado Ror The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, en-GB-1 Rodjxabnyjpfx Ad Ror

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards • This is a corner crimping machine designed for 90-degree joining of aluminium profiles • Equipped with 2 pneumatic top clamps and pneumatic blade movement • Features a millimeter scale system for blade height adjustment and movement • The centering square stop is automatic • Equipped with a discharge button for precise adjustment • Two pedals are used for pneumatic clamping of profiles • Includes polyamide plates to protect profile surfaces from damage Redpfsrbiv Aex Ad Rjr • Side support arms are included