Mesin punching otomatis

Müller Weingarten VK 500.40.25

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Press force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through openings: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram mounting surface: 2,300 x 1,100 mm Lateral passage: 740 mm Installation height: 550 mm (stroke down, adjustment up) Stroke rate: 30 - 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-way slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Visualization Beckhoff Panel • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safety devices + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamps on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Auxiliary drive motorized • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear locating disc and 3 removable guide arms at the front • Hydraulically actuated and driven pressure roller, laterally adjustable via handwheel • Coil car (stationary, decoiler moves hydraulically), lift height 770 mm with 4 guide rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Pedpev T Anlsfx Abxopp Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground, and hard-chromed • Drive of lower straightening and feed rollers via gear transmission • Motorized adjustment of roller block via motors, adjustment accuracy 0.01 mm, values can be stored • Upper rollers openable by 100 mm • Entry feed roller pneumatically openable • Lateral strip guidance at entry with handwheel and threaded spindle • Exit roller basket and loop bridge • Loop control via ultrasonic sensor • Entry aid, hydraulically actuated, consisting of table with extendable tongue and upper bending roller Roll feeder Strip width: max. 600 mm Design features: • Rollers hardened, ground, and chromed • Drive by gear motor • Upper roller hydraulically openable • Hydraulic height adjustment • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feed • Safety fence surrounding the entire line • Decoiler and straightener on common base frame • Various spare rollers for the straightening machine The complete line can be inspected under power at the owner’s location!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar meja: 1.600 mm, panjang meja: 1.400 mm, tinggi kerja: 730 mm, panjang langkah: 400 mm, Perlengkapan: penghadang cahaya keselamatan, Müller Weingarten press line: KE 200-16/14.3.1 – 200 tons KE 300-16/14.2.1 – 300 tons KE 200-16/14.4.1 – 200 tons KE 200-16/14.5.1 – 200 tons Ppjdjv Hqnaopfx Abxsp The presses feature a shared enclosure and centralized fan system, while all other components are independent, enabling individual operation of each press. Each press also has its own dedicated control system. The machines are in very good technical condition, offered for sale from a decommissioned stamping plant in Poland. Modernized between 2018 and 2023: - New Siemens Simatic S7 control systems - New electrical cabinets - Optical safety barriers installed The presses remain connected to the power supply and can be demonstrated under power.

Kondisi: bekas, Tahun pembuatan: 1994, jam operasional: 28.067 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10000, tinggi total: 3.460 mm, panjang pemakanan sumbu X: 200 mm, penyesuaian silinder hidrolik: 76 mm, tinggi meja: 1.200 mm, lebar total: 1.750 mm, panjang total: 1.840 mm, panjang meja: 970 mm, lebar meja: 910 mm, panjang langkah: 16 mm, penyesuaian langkah: 63 mm, jarak antara tiang: 1.230 mm, Tersertifikasi DGUV hingga: 06/2026, tahun perombakan terakhir: 2025, For sale is a Bruderer BASTA 80H, a proven and powerful punching machine designed for maximum precision and reliability in series production. The machine is currently still in ongoing serial production and can therefore be inspected and tested under real production conditions. Acceptance and operational testing are possible until calendar week 17/2026. Due to its continuous use in production, the system is in excellent technical condition and fully operational. Maintenance and servicing have been performed regularly. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Ppodsyu Nipspfx Abxep Application: High-precision punching for series production Condition: Technically impeccable, immediately operational Availability: By arrangement / from week 17/2026 An optional soundproof enclosure is available for purchase. Technical details: Rated force: 800 kN Stroke rate: 100-1,000 spm Feed: BBV 320/200 Adjustable stroke: 16 - 63 mm Die area / Bolster plate: 970 mm Main drive // kW: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Adjustable strip entry height: 80 mm-180 mm Maximum strip width: 360 mm Maximum material thickness: 3 mm Machine dimensions: 2,834 x 1,742 x 3,460 mm Weight: 15,550 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9012, tinggi total: 4.200 mm, penyesuaian silinder hidrolik: 100 mm, tinggi pemasangan: 630 mm, lebar total: 5.100 mm, panjang total: 2.000 mm, gaya penekanan: 400 t, jarak antara tiang: 3.000 mm, berat keseluruhan: 65.000 kg, Tersertifikasi DGUV hingga: 01/2027, tahun perombakan terakhir: 2026, gaya punching: 400 t, Mesin telah direkondisi sebagian dan sudah siap digunakan. Kontrol akan dibangun sesuai permintaan pelanggan (kontrol Siemens). Jarak antar kolom: 3000 mm Penyesuaian langkah: 20 - 80 mm Penyesuaian ram: 100 mm Jarak antara meja - ram: 630 mm Langkah ram/menit: 100 Waktu pengiriman sekitar 3 - 4 bulan setelah penyesuaian kontrol baru sesuai spesifikasi pelanggan. Harga atas permintaan. Podpfox U Ur Rjx Abxjpp