Mesin cetak eksentrik satu kolom

MÜLLER EXP 100

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 100 t Throat depth 300 mm Stroke 10–140 mm Stroke rate 60 strokes/min Slide adjustment 60 mm Table area 800x500 mm Ram area 430x230 mm Passage opening in table Ø150 mm Table height 860 mm Pin hole in ram Ø50 mm Machine weight approx. 5.2 t Hydraulic clutch-brake combination Central manual grease lubrication Mechanical overload protection in ram Lodpfx Aajw E Nuns Uorl Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation

Tahun pembuatan: 1967, Kondisi: baik (bekas), Bandwidth: 300 - 1,250 mm Strip thickness: 0.5 - 3 mm Blade shaft diameter: 180 mm Lsdpfx Aajd Ha Ire Uerl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1984, Load capacity: max. 300 kg Spool plate diameter: 1,000 mm Flange outer diameter: max. 900 mm Lrodpfx Aaef S I I Ho Uel Flange inner diameter: 240 - 560 mm Flange width: max. 180 mm

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Lrodpfxeynmpgj Aa Uol Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Expanding Mandrel Decoiler Type: AE-050 Strip Width: 400 - 1,500 mm Strip Thickness: 0.5 - 3 mm Coil Weight: 20 t Coil OD (Outer Diameter): max. 1,800 mm Mandrel OD: 508 mm Lodpfeupg Scjx Aa Uerl Year of Manufacture: 2009

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Ljdpfx Aashrnbks Ujrl Without control cabinet.

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Lrodpfxed Ha E Se Aa Usl Coil weight: 10 t Mandrel diameter: 508 mm

Kondisi: bekas, Lebar material 300 mm Berat coil 3 t Ketebalan material 2 - 4 mm Mesin pelurus, 7 rol, pabrikan Schleicher, tipe RM 6-95/160 Lebar strip: 300 mm Ketebalan strip: 2 - 4 mm Luas penampang pelurusan: 1200 mm² Tegangan: 220/380 V 50 Hz Daya: 3,1 kW Uncoiler dengan roller penekan, pabrikan Schleicher, tipe H-3 Ledecdrmmjpfx Aa Usrl Beban maks.: 3 t Lebar strip: 400 mm Tegangan: 220/380 V 50 Hz Daya: 3,92 kW tanpa kontrol

Kondisi: bekas, Tahun pembuatan: 1990, Grinding length: 1500 mm Grinding width: 550 mm Workpiece height: 400/450 mm Lredpfjwlvirsx Aa Uol Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Grinding spindle speed: 1400/2800 rpm Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and converted to a modern control system. The machine is equipped with a coolant system, automatic vertical infeed, dressing device, and wheel mounts.

Kondisi: bekas, 72″ x .187″ x 50.000 lb Paxson Loop-Längsteilanlage Lodpfx Aaoihf Ufe Uorl Hersteller: Paxson Materialbreite: 12″ – 72″ (Abwickler 60″) Materialdicke: .010″ – .187″ Coilgewicht: 50.000 lb Coil-Innendurchmesser: 20″ – 24″ Coil-Außendurchmesser: 72″ Geschwindigkeit: 500 / 1.000 fpm Laufrichtung: von rechts nach links Materialfestigkeit: 40.000 psi Streckgrenze / 50.000 psi Scherfestigkeit Verarbeitbare Materialien: Kaltgewalzt (CR), Warmgewalzt (HR), verzinkt Einlauf-Transferwagen Einlauf-Coilwagen Abwickler mit Spannzapfen Angetriebene Niederhalterolle Motorische Spreizung Verschiebbare Grundplatte Hydraulischer Abziehtisch Angetriebene Quetschwalzen